SPR picture thread

[Chasingpro]

SPR motivation is needed. Show me what you have.

 

[just browsing]

Same rifle different ways.

 

[Skunk]

 

[blbennett1288]

Finally got a first place finish at our last local SPR/DMR match, have two other second place finishes at those matches, and a top 10 at a larger regional event with this setup.

With handloads it’ll do 1/2-5/8” five shot groups. I have defaulted to 77gr reman ammo and it’ll shoot 3/4” consistently with it.

Only thing I might change is swap to the AEM5.

600 yards and in this setup shines. Past that things start to get dicey.

 

[WillHugh]

Took a scoped carbine course with this at Ridgeline Defense last weekend. Was pretty blown away by how well the rifle ran. I usually shoot a heavier stainless barrel setup, but the KAC factory gun was plenty consistent. Shot from 3 yards out to 600.

 

[PBWalsh]

Former SPRs I had. Great rifles if you need their specific capability.

 

[blbennett1288]

Switched to the AEM5…

 

[bf2junky]

18" UIC-10A in .308 w/ Sandman-S Mil

16" White Oak SPR barrel w/ AEM5 - Midwest Industries 13.375" Combat Rail

 

[shlouf]

 

[DangerRanger]

 

[S197]

14.5 WOA

 

[Molon]

…..

 

[Glassaholic]

• Seekins SP223 Gen2 billet ambi Lower w/ Strike Enh. Takedown Pins
• Aero Precision Enhanced M4E1 Upper with 12.7” M-LOK Handguard, Odin Works 4” Arca Rail
• Geissele National Match Trigger
• A2 Buffer tube with JP Polished Spring and A2 Buffer
• LUTH-AR MBA-1 FDE Stock and LUTH-AR The Chubby FDE Grip and Seekins Red SP Safety Selector Kit
• White Oak Armament (WOA) Complete Bolt Carrier Group, 223/556 C158 Bolt, Black Nitride Finish
• WOA SPR .223/5.56 Wylde, 18" Fluted Barrel, 1:7 twist with TBAC Brake
• Seekins Select Adjustable Gas Block (.750”) w/ Rifle Length Gas Tube

Pics were when I had the Bushnell LRHS 4.5-18x44 scope, I now have the Athlon Helos BTR Gen2 2-12x42 on this rifle with Leupold DPP in offset 45° mount.

 

[maceface]

 

[TN Shooter]

 

[Constant_Impingement]

 

[benson821]

 

[Glassaholic]

Finally got a first place finish at our last local SPR/DMR match, have two other second place finishes at those matches, and a top 10 at a larger regional event with this setup.

With handloads it’ll do 1/2-5/8” five shot groups. I have defaulted to 77gr reman ammo and it’ll shoot 3/4” consistently with it.

Only thing I might change is swap to the AEM5.

600 yards and in this setup shines. Past that things start to get dicey.

View attachment 7975634
View attachment 7975635

Is that an UBR stock with the storage plates removed? Who's cheek pad are you using?

 

[blbennett1288]

Is that an UBR stock with the storage plates removed? Who's cheek pad are you using?

Correct, UBR with storage compartment removed. I went to Michaels and got some 1/8" thick foam padding and glued it to the stock with E6000. Did the same with the ATX but used 1/16" foam

 

[Daddyusmaximus]

Basic, but gets the job done.

Here's hoping it never has to...

 

[Longrangeprecision762]

18" Noveske N4

 

[rothgyr]

Finally got a first place finish at our last local SPR/DMR match, have two other second place finishes at those matches, and a top 10 at a larger regional event with this setup.

With handloads it’ll do 1/2-5/8” five shot groups. I have defaulted to 77gr reman ammo and it’ll shoot 3/4” consistently with it.

Only thing I might change is swap to the AEM5.

600 yards and in this setup shines. Past that things start to get dicey.

Alright, I've seen people mention SPR/DMR matches here on the hide, but have no idea when or where they take place. Are there any in the Utah area?

To the OP, here is a picture of my mk12 grendel with a delta PRI forend:

Still need to get a proper brake and suppressor combo going for this gun. I wish Otter Creek Labs would get their head out of their butts and make a .30 can. I wouldn't complain if they just did steel instead of titanium either. I like a good forward balance as it is. In the mean time, I plan to run my Maverick on this once it's out of jail.

EDIT: I've since put the AEMB in 6.5mm threaded to 1/2x28 on it:

 

[Glassaholic]

Alright, I've seen people mention SPR/DMR matches here on the hide, but have no idea when or where they take place. Are there any in the Utah area?

To the OP, here is a picture of my mk12 grendel with a delta PRI forend:

View attachment 7996504

Still need to get a proper brake and suppressor combo going for this gun. I wish Otter Creek Labs would get their head out of their butts and make a .30 can. I wouldn't complain if they just did steel instead of titanium either. I like a good forward balance as it is. In the mean time, I plan to run my Maverick on this once it's out of jail.

That a USO 3.2-17 on there? Been a while since I’ve seen one on a gasser

 

[rothgyr]

Yeah, FDN 17X JVCR. Love the reticle. I scored a 50% cert and it was only good for the 17X, and while I would have preferred a 10X or FX10 for future use with a clip on, but I think the 17x ought to leave enough room. We'll see eventually.

 

[Black max]

CMT upper, lower, hand guard, 18” Proof SS, Geissele super 42 H2 buffer and spring , and Geissele SD-E trigger

 

[blbennett1288]

Alright, I've seen people mention SPR/DMR matches here on the hide, but have no idea when or where they take place. Are there any in the Utah area?

To the OP, here is a picture of my mk12 grendel with a delta PRI forend:

View attachment 7996504

Still need to get a proper brake and suppressor combo going for this gun. I wish Otter Creek Labs would get their head out of their butts and make a .30 can. I wouldn't complain if they just did steel instead of titanium either. I like a good forward balance as it is. In the mean time, I plan to run my Maverick on this once it's out of jail.

No idea about Utah but there are 3 ranges around my area in Alabama that offer them, not to mention the Quantified Performance matches.

 

[benson821]

Alright, I've seen people mention SPR/DMR matches here on the hide, but have no idea when or where they take place. Are there any in the Utah area?

To the OP, here is a picture of my mk12 grendel with a delta PRI forend:

View attachment 7996504

Still need to get a proper brake and suppressor combo going for this gun. I wish Otter Creek Labs would get their head out of their butts and make a .30 can. I wouldn't complain if they just did steel instead of titanium either. I like a good forward balance as it is. In the mean time, I plan to run my Maverick on this once it's out of jail

We are looking at starting some matches through the shop I work at in SW Montana. Course of fire is written and proofed, waiting for hunting season to end so we can run a small match to work the kinks out. Plan is to run monthly matches starting late winter/early spring next year.

 

[Chasingpro]

This is mine

 

[NM575]

This thread is dangerous to my wallet...urge to make purchases rising.

 

[PBWalsh]

This thread is dangerous to my wallet...urge to make purchases rising.

Lotta Veteran’s day and Black Friday stuff ongoing. Just saved a few hundred on an AR10 build.

 

[Glassaholic]

I'm slowly piecing together a new 6mm ARC build and when finished will be curious to see how much I like it compared to my 5.56 SPR build

 

[db2000]

 

[danr]

5.56, also putting together a 20” 6mm arc in this configuration. Should be pretty awesome.

 

[gconnoyer]

 

[Glassaholic]

View attachment 7997804

Love the lighting

 

[gconnoyer]

Thanks man!

 

[Steamroller53]

Does the UBR balance the 18in barrel?

 

[Steamroller53]

View attachment 7997749
5.56, also putting together a 20” 6mm arc in this configuration. Should be pretty awesome.

Finally got a first place finish at our last local SPR/DMR match, have two other second place finishes at those matches, and a top 10 at a larger regional event with this setup.

With handloads it’ll do 1/2-5/8” five shot groups. I have defaulted to 77gr reman ammo and it’ll shoot 3/4” consistently with it.

Only thing I might change is swap to the AEM5.

600 yards and in this setup shines. Past that things start to get dicey.

View attachment 7975634
View attachment 7975635

Does it balance better with the UBR

 

[danr]

Does it balance better with the UBR

Stand alone without suppressor, mine (20”) balances really well with the UBR.

 

[Shootnwrench]

11.6lbs as shown

Original Parts left in its 3rd configuration
- RRA upper/lower and kits
- RRA chrome BCG

Lastest set up
- MI 15” Gen II
- Nordic Components 18” SPR, 223 wylde, 1:8, Rifle gas
- Superlative Arms AGB
- Geissele SSA-E
- BCM Mod 2 grip
- BCM mod 3 CH
- Battle Arms Ambi safety
- H2
- ACS-L
- Badger Riser
- ARC rings
- MK5 3.6-18 PR1 Illuminated
- TBAC ultra 7
- TBAC bipod

 

[DesertRat00]

Kac

 

[DesertRat00]

Here’s better pictures

 

[Glassaholic]

Here’s better pictures

Love the SASS way paint job on there. How do you like the Athlon 2-12? That is the scope I have on my SPR right now and it has really impressed me for the price. Going to look at the new March 1.5-15x42 FFP that's just been announced though and hope it's even better.

 

[PBWalsh]

March 1.5-15x42 FFP

Dang, I really didn’t need to hear that. It looks fantastic. Though I’d like to see a bit different reticle in the standard FFP model.

 

[DesertRat00]

Love the SASS way paint job on there. How do you like the Athlon 2-12? That is the scope I have on my SPR right now and it has really impressed me for the price. Going to look at the new March 1.5-15x42 FFP that's just been announced though and hope it's even better.

thank you sir, about the scope, I absolutely love it. It’s ratios are extremely well planned out by Athlon. I get crystal clear lowest and highest mag. I would highly recommend. It’s like 700$ on the website. I found it on Amazon for 545 then it let my click the little check box for 100$ off. Payed 445 for it! And yes it is real haha

 

[DesertRat00]

Love the SASS way paint job on there. How do you like the Athlon 2-12? That is the scope I have on my SPR right now and it has really impressed me for the price. Going to look at the new March 1.5-15x42 FFP that's just been announced though and hope it's even better.

I also think it rates the SASS job since it does a a KAC rail on it

 

[asus611]

Centurion arms MK12 upper
Area 419 2 port brake
Centurion arms MLOK rail
Gray Ops Mlok weights
Condition 1 mount
Leupold MK5 3.6-18 H59
Geissele Charging Handle
Geissele BCG
Triggertech Diamond 2 stage
PWS Ambi Lower
PWS Enhanced buffer tube
Magpul CTR
Walsh bag rider
Atlas bipod with 419 arca mount
Henderson Mlok Arca rail


IMG_0685 by asus611, on Flickr

IMG_0686 by asus611, on Flickr

 

[Trigger Monkey]

I was playing around upstairs and weighed the above rifle at 11 lbs 4.5 oz as you see it here.

Basic specs:
Vltor upper with BCM BCG and KMR rail, WOA 18" SPR barrel, PRI muzzle brake.
Aero Precision Lower, Geissele SSA-E, Magpul K2 XL grip, BCM Intermediate RE, BCM stock
NF ATACR 4-16, NF 1.44" mount, MI offset iron sights.

It will shoot 1 MOA with IMI 77gr and it's decent enough with 55 gr ball that I'll push it out to a little under 500 with it, which saves me on my the IMI ammo.

 

[MK20]

We are looking at starting some matches through the shop I work at in SW Montana. Course of fire is written and proofed, waiting for hunting season to end so we can run a small match to work the kinks out. Plan is to run monthly matches starting late winter/early spring next year.

Keep us posted, I'll make it down for that.

 

[Shootnwrench]

Winter time work

77 Sierra’s shot prone