Tac Ops Rifles
- Thread starter BCX
- Start date
I believe there are still 2 available in this group.
TAC OPS / KMW Collaboration
Just a heads-up gentleman after several in-depth conversations with Terry Cross of KMW we are seriously considering doing a collaboration of a rifle project together. With our combined expert experience of over 75 years of building thousands of platforms we are thinking of doing a Tac Ops / KMW...
www.snipershide.com
Here is a picture of Tac Ops shooting .4”s
It’s over guys, the gun is trash. Maybe I need to load for it.
But it’s pretty good for 600 yards in my opinion. 1/13th MOA
It’s kind of hard to measure because the paper rips. But it’s between .46” and .44”
.708 - .264 = .444”
It’s over guys, the gun is trash. Maybe I need to load for it.
But it’s pretty good for 600 yards in my opinion. 1/13th MOA
It’s kind of hard to measure because the paper rips. But it’s between .46” and .44”
.708 - .264 = .444”
This has to be the best shooting i’ve ever seen in this thread. Insane
Same can be said for everyone else's .3" groups at 100 yards all day long, if they do their part.
With handloads
Looking for FGMM 190gr SMK .300WM? budsgunshop.com. I found this a few days ago. I didn't post immediately because I've never bought from Bud's and I usually don't buy unless I can order over the phone. The order was stuck in KY for a few days but then started to move so probably legit. I don't have it yet so still at your own risk. If we use the prices from the last lot that was available, this is a good buy. $52.99. Good luck. QH
Yeah, I've a couple of boxes of that as well. I also have a couple of the Black Hills 190's. The first few times out with the new rifle will be epic.
I'm glad to hear @MikeRTacOps brake is so effective.
What was isn't, and what has replaced it is a pain in the ass. Thanks Federal.
5.56 77gr stuff is back on ammoseek, though…not my favorite. If you can get your hands on Atlanta Arms 77gr, it’s ridiculous stuff. I was getting 2600 from my 12.5 Hodge with sub 10 SDs.
Worse than the Black Hills 190 SMK is the unicorn HSM 190gr. I’ve had an open order with them for over a year and still nothing in terms of a restock. I really want that sweet sweet 3100+ fps.
Charlies Custom Clones. I bought it about a year ago. It is still listed on their website but shows none available and a significant price increase.
I put two sub 0.3 groups in with 215s in a row, being a complete novice at shooting groups and new to magnums. Its completely credible with 6.5 Creedmoor. If this is a joke post, carry on. If not, cope and seethe.
I think he is halfway joking.
My first group that day at 600 was 1 1/2" which is 1/4 MOA.
If I'm on my game I can do it repetitively, the 1" to 2" groups at 600 yards in wind.
I don't know if I can repeat sub 1" or sub half inch at 600 yards though.
First group. Each grid square is 1 moa. The first shot I took was to get a wind call and then I dialed .4 left and shot these three. POA POI
This is the .4” group later on after more people showed up and one actually shot on my target. I shot 15 at the 8 ring, shot 16 I accidentally aimed at the 7 ring and after that I corrected myself and put the next two shots with the 15th one on the 8 ring.
Pure sarcasm.
If you listened to the recent Hornady podcasts it might make sense.
Tac Ops Green Hornet in 44 Mag inbound to NM with a Suppressed X-Ray 66 300 Win Mag to a Tac Ops Ninja...
Mike R
Mike R
Probably my Ninja I have skills in Suppressed Weapon Systems but as far as jump roping probably not lolYou also do them in .357 mag?
Mike R.
Seems I've been doing this wrong!
I always thought you shot at the 'X' ring!
(yes, the screen is that scratched up!)
I always thought you shot at the 'X' ring!
(yes, the screen is that scratched up!)
I shoot groups holding on the rings.
I can shoot the X, but everything would get jumbled together and I couldn’t measure it well and separate the groups.
@JakeM clearly knows how to shoot, and shoot well.
I'm a bit envious of his skills, I don't shoot .308 as much as I should and this cartridge exposes my fundamentals flaws more often than not.
Great cartridge for training, but not always great for the ego
Hey what’re y’all do now to attach an arca to the anschutz rail? I saw RRS longer makes the BANS-80
Wondering if the RRS BMLOK-60 and a set of accu-shot BT28-N nuts will work but don’t know if the BMLOK-60 rail side is too thick to fit inside the anschutz rail
Wondering if the RRS BMLOK-60 and a set of accu-shot BT28-N nuts will work but don’t know if the BMLOK-60 rail side is too thick to fit inside the anschutz rail
I'd get a sawtooth universal and the accushot nuts .
You might also try to modify the AICS 12" sawtooth arca rail. May need to take some dimensions of the anshutz rail width and the opening on an AIcs. That comes with the hardware too
It depends on the Arca rail.
Some might take a bolt with a box head, but the BT stuff from Atlas has tapered heads.
If you get the bolts from Atlas for the nuts.
Someone posted this before:
www.sawtoothrifles.com
I've used the nuts from the BT28 AFAR Rail Kit to attach stuff. The AFAR rail can also be used for a bipod.
www.accu-shot.com
R-Lock Dovetail Rail: Universal Anschutz
Universal Fit R-Lock/Arca Dovetail Rails for Anschutz type attachment.
www.sawtoothrifles.com
I've used the nuts from the BT28 AFAR Rail Kit to attach stuff. The AFAR rail can also be used for a bipod.
Accu-Shot Monopod Precision Shooting Rifle Rest Magpul PRS Rail
Accu-Shot precision monopods, Atlas bipods and rifle accessories provide a high-degree of accuracy for long-range hunting, law enforcement or military duty.
www.accu-shot.com
That’s a fucking classic Tac Ops problem if ever there was…
Hard to believe Mike even let your gun out of the shop… ;-)
Someone posted this before:
R-Lock Dovetail Rail: Universal Anschutz
Universal Fit R-Lock/Arca Dovetail Rails for Anschutz type attachment.
I've used the nuts from the BT28 AFAR Rail Kit to attach stuff. The AFAR rail can also be used for a bipod.
Accu-Shot Monopod Precision Shooting Rifle Rest Magpul PRS Rail
Accu-Shot precision monopods, Atlas bipods and rifle accessories provide a high-degree of accuracy for long-range hunting, law enforcement or military duty.
I called and texted with Matt at SawTooth Rifles. I broke out the old precision measuring tools and give him the info. He sent me the Dependabilt R700A setup, along with a set of shorter screws. Turns out the shorter screws were not needed, and the long screws that come with the ARCA rail do not touch or bottom out in the Anschutz rail. Delta-55 here.
Text Matt @ (970)213-5039 or just order directly from this link: https://www.sawtoothrifles.com/prod...chutz/?attribute_model=700+Anschutz+Universal
Last edited:
Anyone feel free to call me or text me at 310-275-8797 , please note the VM is not setup for obvious reasons lol
I post this number publicly my other number if you have it I like you alot and your probably a Tac Ops Ninja
Mike R.
I post this number publicly my other number if you have it I like you alot and your probably a Tac Ops Ninja
Mike R.
I’m not at the point of calling yet, but will within the next couple months once I figure out exactly what I want to do.
Things I need to come to a decision on:
Caliber
Barrel length
Stock type
I’d like a 20 inch 308, but a 300WM would be nice. Don’t want a McMillan A5, but definitely want an adjustable cheek rest. Want a sling stud to mount a Harris bipod on (seriously)
The Alpha, Echo, and Sierra seem to be my favorites so far.
Things I need to come to a decision on:
Caliber
Barrel length
Stock type
I’d like a 20 inch 308, but a 300WM would be nice. Don’t want a McMillan A5, but definitely want an adjustable cheek rest. Want a sling stud to mount a Harris bipod on (seriously)
The Alpha, Echo, and Sierra seem to be my favorites so far.
Somebody posted an Echo in this thread a while back, very nice picture.
I'll try to find it.
