The AR15 Picture Thread

IMG_4281.jpeg
IMG_4287.jpeg
IMG_4294.jpeg
New 16" 6mmARC with Proof carbon fiber barrel. Interesting custom Cerakote color ordered by the buyer. Looks brown in one light and green in another.
 
AR collection.

Top to Bottom:

AAC MPW 9" 300BLK with a URX4
Holosun 403GL on 1.93" Scalarworks

11.1" 5.56 Larue Stealth Barrel/Medium KAC RAS
AAC MPW Lower
KAC QDSS-NT4
Steiner P4Xi in Larue 1.93"

13.9" 5.56 BA Barrel P&W 4 Prong/13" URX4
Spike No Logo lower
Vortex PST2 1-6 in Larue 1.5"

NSWDG Recce built on Colt Receivers
15.1" CLE Douglas Barrel
AEM5
2.5-10x24 NF with T1 up top

IMG_3798.jpeg
 
AR collection.

Top to Bottom:

AAC MPW 9" 300BLK with a URX4
Holosun 403GL on 1.93" Scalarworks

11.1" 5.56 Larue Stealth Barrel/Medium KAC RAS
AAC MPW Lower
KAC QDSS-NT4
Steiner P4Xi in Larue 1.93"

13.9" 5.56 BA Barrel P&W 4 Prong/13" URX4
Spike No Logo lower
Vortex PST2 1-6 in Larue 1.5"

NSWDG Recce built on Colt Receivers
15.1" CLE Douglas Barrel
AEM5
2.5-10x24 NF with T1 up top

View attachment 8328771

I didn't realize that a SDN-6 would recess inside of a URX4.
 
Just put together this 18" non-free float beaut and she's shooting well under moa off the gas block mounted bipod. I can't believe it.

Can anyone confirm where to buy rifle length handguards that aren't plastic hollow feeling garbage?

1000001532.jpg



1000001536.jpg


1000001539.jpg
 
Just put together this 18" non-free float beaut and she's shooting well under moa off the gas block mounted bipod. I can't believe it.

Can anyone confirm where to buy rifle length handguards that aren't plastic hollow feeling garbage?

View attachment 8329903


View attachment 8329905

View attachment 8329906
Centurion C4 rail will turn it into a free float. It clamps over the standard barrel nut. Or you can go old school kac m5 rail.

P&S M5 kit https://www.thoroughbredarmco.com/product/519/
 
Last edited:
My two most recent builds

The top is a 6.5 grendel, Odin works 18” dmr barrel and bolt. FN upper and psa lower. Giessele trigger. Silencercentral banish 30 gold suppressor. Primary arms glx 3-18

The bottom is a 5.56, 16” BA premium black series barrel. Rainier lower and aero upper. Giessele trigger. Silencerco saker 556k suppressor. Vortex ffp 1-8 strike Eagle.
 

Attachments

  • IMG_7357.jpeg
    IMG_7357.jpeg
    491.8 KB · Views: 121
  • Like
Reactions: LRRPF52
My Larue build -

- Larue match grade upper
- Larue billet lower w/ Larue trigger
- Vltor stock
- ny compliance mag lock (ughhh)
- bushnell lpvo 1-4 (not ideal but I had it around, threw it on, and was great, so no point in swapping it for now)

Both targets at 100yds on 4x.
 

Attachments

  • IMG_4123.jpeg
    IMG_4123.jpeg
    785 KB · Views: 88
  • IMG_4124.jpeg
    IMG_4124.jpeg
    472.3 KB · Views: 89
  • IMG_2164.jpeg
    IMG_2164.jpeg
    1.4 MB · Views: 87
  • Ballistic-X-Export-2023-12-19 23:31:05.371247.jpg
    Ballistic-X-Export-2023-12-19 23:31:05.371247.jpg
    265.2 KB · Views: 91
Last edited:
Forgive my ignorance, but what am I looking at here?

Some sort of machinegun-esque dual handle/trigger mechanism. With both hands in back, probably tripod mounted or something. Piston? Maybe AR lower.? Maybe.

I've never seen anything like this before.
Just looks like a standard Fightlite MCR upper on a lower with a home brewed spade grip/trigger in place of the stock.
 
Really like the look of the Handguard. Did you make the cover or buy it

Bought it. Wise men company makes it, hot pocket rail wrap. They have a website. It’s made to shield your hand from heat on high rate fire guns, but in this case for a hunting rifle it also makes it nice to hold/grab when that aluminum is very cold.
 
Just looks like a standard Fightlite MCR upper on a lower with a home brewed spade grip/trigger in place of the stock.

Correct on the Fightlite MCR upper, incorrect on the lower, it’s not home made, it’s a KNS precision made product which for years I’ve said is one of the gayest ar accessories ever made, until I mates it to a Fightlite and is purpose driven to be vehicle mounted
 
Bought it. Wise men company makes it, hot pocket rail wrap. They have a website. It’s made to shield your hand from heat on high rate fire guns, but in this case for a hunting rifle it also makes it nice to hold/grab when that aluminum is very cold.
A bit off topic since this really isn’t an AR, but just ordered one…gonna come in handy with the new SiCo Hybrid 46 that just got out of ATF jail today! It’s still free-floated, but a very snug fit on my PCC vs. the Rugged Obsidian that’s been under there the past year or so.

i-Nx2bW6L.jpg
 
New 5.56 SBR built for an LE customer: BAD billet receiver set, rail, push pins, mag release, bolt release, safety, etc; Noveske 10.5" HFCL barrel with feed ramps contoured and polished; JP FMOS BCG, with bolt headspace checked at 1.4666"; Radian charging handle; TriggerTech Trigger; BCM MKII recoil system; SLR adjustable gas block; OSS flash hider; Aimpoint T-2 in 39mm QD mount.

IMG_4331.jpeg
IMG_4332.jpeg
IMG_4333.jpeg
IMG_4334.jpeg
IMG_4335.jpeg
 
Sharps Bros. "Livewire" forged lower with their billet upper. Criterion 13.9" barrel and Geissele MK16 rail. I'm liking the HK416-ish profile of the lower - Excellent bang for the buck here. You can see a new DLC coated Rogue Ops bolt carrier in the right side close up, too.

View attachment 8343646View attachment 8343647
They had the Maritime bolt catch in mind when designing the upper billet, eh? Nice.
 
Recently sold off all my specwar parts from my SBR, and decided I wanted to build a 10.5 piston upper for 100% suppressed shooting. The obvious inspiration here is the HK 416.

Parts:

Upper, Parts
- BCM Scratch & Dent Upper
- FCD mallard brown charging handle
- FCD forward assist
- FCD dust cover
- Scalarworks 1.93 BUIS
- Aimpoint Micro T2
- Scalarworks 1.93 mount
- Superlative Arms carbine length piston kit
- FCD SOTAR cam pin, NP3
Scionics Firing Pin, NP3
- LMT e Bolt
- Adams Arms Bolt Spring
- Railscales zinc spring for piston return
- Noveske 10.5 CHF CL barrel
- Geissele Mk8 DDC
- surefire scout on arisaka online mount
- FCD cable management
- unity hot button

Lower, Parts
- LMT MARS-L, SBR
- Geissele SDC
- FCD take down pins
- FCD bolt catch
- FCD mag button
- FCD mag catch
- B5 p22 grip, coyote
- FCD end plate
- FCD a5 castle nut
- FCD a5 buffer tube, burnt bronze
- FCD 50° Safety
- Magpul DT stock
- FCD reinforced buffer Retainer
- Geissele Super42, Rifle
- BCM Mk.2 T2 buffer

Suppressor Setup
- TBAC Muzzle Brake, CB
- EA Titanium CB / HUB Mount
- Liberty Precision Machine Anthem S

Screenshot_20240225_080017_Photos.jpg

Screenshot_20240225_085006_Photos.jpg

20240217_160921~2.jpg
20240217_162408~2.jpg

20240130_165848.jpg

20240311_134236~2.jpg

20240130_092416~2.jpg
 
Last edited: