Here are a couple of my boxes. The top one is mahogany. It came out nice, but I’m not happy with the finish. I should have tested it on a trial piece. It’s too opaque and the beautiful grain on the top board got lost. Won’t do that again. Did the light colored box a few years back. I think I've seen someone else post one on here. They put the build in a magazine and I’m sure a bunch of folks made them, but it was a fun little project.
-
Having trouble using the site?
Contact support
Maggie’s The Wood Shop
- Thread starter TxWelder35
- Start date
I have the Openbuilds 1500 Lead machine and use Vectric VCarve Pro software. It took some work to get it dialed in and learn the software but I think it’s working pretty well now.
Do yourself a favor and use a spoil board behind it if you’re using your table saw for box joints. That’ll just about eliminate tear out.
Wow, that bottom one is my original design. I'm guessing you might have ran onto it in Fine Woodworking? Nicely done!
What finish did you use on the top one that disappointed you?
They are two piece and feel mainly small in the back but a bit on the sides too I'll try to post a pic when I can figure out how to download it from my phone..
Most single action grip panels are between .4-.6 at the thickest part. .4 would be small for sure. Most people are happy with .5 thickness in the panels, but if you have large hands then .6 might be where you need to be.
So if the one piece grip would cover the backstrap and give me a bit more length of pull that's what I really need.
@Bigfatcock , sorry for the delay. I used min-wax poly stain. It has the stain and polyurethane in one product. I had used the dark “Bombay” color on things in the house and it came out great, so I thought a lighter color would work for the mahogany. The stain was just too thick colored for the grain to show, and there is spectacular grain on the lid. My mistake, but I learned from it. My wife loves the box, so that’s what matters.
Thank you! I think it still looks really good!
If I’m working with really nice grain, I’ll usually stain with a water or alcohol based dye if I have to stain. Doesn’t muddy things like oil based stains can.
I might also opt for a water based polyurethane since it is clear unlike oil based polyurethane.
I bought the OpenBuilds 1515 Lead machine a couple years ago. You have to assemble it yourself which allows you to learn every inch of the machine and also allows you to get it perfectly square. It took me quite a while and many jobs to get it dialed in but at this point, I’m happy with my decision. As far as customer support, I had an issue with one of the electronic parts, and they sent me a new part, no questions asked, very quickly. There’s also a big forum on the site with plenty of people willing to help if you have a question. I have no affiliation and spent my own money for all of it. I also purchased the table for it from Openbuilds. I use Vectric VCarve pro but I’ve been wanting to upgrade to Vectric Aspire which is an additional cost. I probably have around 5 grand in my setup, but you can certainly get smaller machines for less. Feel free to give me a shout if you have any other questions, I did a ton of research and picked the route that I thought would be best for me.
Step 2 in a multiple step finishing process.
Starting on a new project:
Sort of the right shape:
This is just scrap maple from an old set of a vice jaws. This is a sacrificial test set. A lot of interesting details and nuance to get right in this set.
Sort of the right shape:
This is just scrap maple from an old set of a vice jaws. This is a sacrificial test set. A lot of interesting details and nuance to get right in this set.
Does this count…..Made by Yaheetech!
I won’t to hang out with “trashed directions guy”.
What’s with these Chinamen calling me Casper?
I won’t to hang out with “trashed directions guy”.
What’s with these Chinamen calling me Casper?
Does anyone know the proper tourque value for setting a screw in cardboard?
Cocksuckers didnt clearance the hinges enough to allow the door to full swing.
Sweet.
My hinge fix looks a little fucked….
But it allows the door to swing 180 degrees.
If I left it at 90 the kids would force it open to 180 ripping the door off.
This fine piece of dung is for their head.
My hinge fix looks a little fucked….
But it allows the door to swing 180 degrees.
If I left it at 90 the kids would force it open to 180 ripping the door off.
This fine piece of dung is for their head.
Got some extra hardware.
Might pay the twenty bucks and try to sell it in the PX.
Might pay the twenty bucks and try to sell it in the PX.
If they build fighter aircraft like furniture……
I'm in my shop now. This is my latest project. Its a retirement gift for a local Police Chief. Dept coins will go in the circles.
Wade2Big supports your efforts.
Step 875,432 of the multi step finish process. The goal here is to get the color and depth of Aqua Fortis Reagent without having to use actual Aqua Fortis Reagent. The heat required to blush the nitric acid would ruin any glue joints.
I achieve this color using two different dyes made up of two different dyes each.
I achieve this color using two different dyes made up of two different dyes each.
Mrs Pmclaine does not like that in order to do this…..
You have to accept this..
Mrs Pmclaine is going to find out.
You have to accept this..
Mrs Pmclaine is going to find out.
Let her know that I would have charged $60 to make that modification. You saved her $60 which should immediately be rolled over to the liquor fund.
I guess 90 degrees will be okay if careful….Its a hard stop where the corner of the door meets the cabinet. No way my kids will allow physics stop them from stressing those 1/4” screws in the pressed shitium boards. Not even the arsenic based glues they use in that stuff will prevent failure.
Maybe I just overthink stuff.
I picture stressed hinges in cardboard. Once pulled free they will never be repaired.
This is the last time I touch this piece of shitanium.
If I cared I’d go buy a deeper hinge.
Maybe I just overthink stuff.
I picture stressed hinges in cardboard. Once pulled free they will never be repaired.
This is the last time I touch this piece of shitanium.
If I cared I’d go buy a deeper hinge.
Last edited:
Gonna do something useful….
Running ultra juicy patches of Hoppes down the barrel of the new gun soaking out some copper and carbon.
Running ultra juicy patches of Hoppes down the barrel of the new gun soaking out some copper and carbon.
More Aqua Faux-tis.
The base coat dye is:
6 oz distilled water
61 drops of Trans Tint dark walnut
6 drops of Trans Tint orange
The top coat dye is:
1 quart distilled water
1/2 oz Transfast Antique Cherry Brown powder
36 drops Trans Tint dark walnut
The base coat dye is:
6 oz distilled water
61 drops of Trans Tint dark walnut
6 drops of Trans Tint orange
The top coat dye is:
1 quart distilled water
1/2 oz Transfast Antique Cherry Brown powder
36 drops Trans Tint dark walnut
Looks more like a happy little KKK guy.
My current project is a rustic alder mantel along with some crown and trim, it started as a straight beam of alder and then I pulled out some of the knots/colored them in to look like "old" wood and roughed it up a little bit:
Last edited:
Similar threads
