-
Having trouble using the site?
Contact support
Tikka T1X
- Thread starter jbell
- Start date
Thanks, Wrenchforge, I found them. I wish they gave a better description, they don't say anything about a match chamber or type. I wonder if they will get some in without the threaded barrel, not my thang! Will be waiting to hear how KOD's 457 turns out.
I bought mine straight from IBI. I wanted to be 100% sure I knew what I was getting. It's not a big deal buying from Canada, just takes a little longer to get here going through customs.
Finally got a chance to take the new t1x out the past two days. Getting 2-3 MOA but im sure that's me.
The number of FTE's is insane though, 3-6 per mag. I tried CCI SV and aguila. Any consensus on how to bend the spring? How do I even remove the spring?
15x mag at 100 yards is less than I was expecting, can't wait to try 2-300 yards and see how the hell people manage that.
The number of FTE's is insane though, 3-6 per mag. I tried CCI SV and aguila. Any consensus on how to bend the spring? How do I even remove the spring?
15x mag at 100 yards is less than I was expecting, can't wait to try 2-300 yards and see how the hell people manage that.
What is the idea behind IBI and Lothar/Walther going with a 22 inch barrel vs. 20, 18 or 16.5? It's been my understanding max velocity is reached in 16". I would assume the shorter barrels would be as accurate. What am I missing? What barrel length do the Bench Rest shooters use?
Is that an IBI or Walther? I would say Walther since it's threaded. How is is shooting?
It may benefit you to check out this thread I posted a few days back.
T1x ejector, magwell and mag mod
The large majority of T1x owners will not have to do these modifications to make your T1x function any better. If it's working good don't mess with it. Mine wasn't working good after I installed the IBI barrel with Win 52D chamber. Everything functioned fine with the 1st IBI barrel and the...
www.snipershide.com
I don't believe anyone would have an answer. I'd recommend calling both and asking about it if you really wanted to know the truth.
It is an ibi, I have no clue how it shoots... haven't been able to go to the range(new baby I the house)
And the pic is more to draw attention to a t1x in an xray not a bravo(ie the krg t1x bravo can have parts swapped with a standard t3 tikka to make a 100% functional t1x xray with out having to mess up the mag well on it. which means more than likely you could do the same with a whiskey 3
Last edited:
Was that barrel through Brownells, or from IBI directly?
do you know which chamber it was reamed to?
My first precision 22 build:
Tikka t1x
Area 419 30 moa rail
Krg bravo
Krg arca rail
Anarchy trigger spring
Atlas psr area 419 arca adapter
Vortex pst gen2 3x15
Badger rings
Mountain tactical diamond bolt knob on the way.
I've ran multiple types of ammo threw it and haven't experienced a single ftf or fte.
The group is cci standard velocity 10 round group @ 50 yards (other "flyers" are from someone else)
Needless to say I'm extremely impressed with it!
Tikka t1x
Area 419 30 moa rail
Krg bravo
Krg arca rail
Anarchy trigger spring
Atlas psr area 419 arca adapter
Vortex pst gen2 3x15
Badger rings
Mountain tactical diamond bolt knob on the way.
I've ran multiple types of ammo threw it and haven't experienced a single ftf or fte.
The group is cci standard velocity 10 round group @ 50 yards (other "flyers" are from someone else)
Needless to say I'm extremely impressed with it!
Attachments
There's a Facebook post on IBI's page from two weeks ago where they say the Brownells barrels are Win 52D so far. It was a comment under a post they made with a bunch of KissOfDeath's pictures.
Unless you are wanting the threaded barrel, it may be faster to get one directly from IBI.
KOD, have you had any of the issues Littlepod had with closing the bolt, and the pressure required to fully seat the bullet?
I did in the beginning but fixed it. Read about it here. https://www.snipershide.com/shooting/threads/t1x-ejector-magwell-and-mag-mod.6990515/
The most difficult round to seat is the CCI SV. It's the bullet design because it is the hardest to seat on any rifle I have that has a match chamber.
The most difficult round to seat is the CCI SV. It's the bullet design because it is the hardest to seat on any rifle I have that has a match chamber.
KOD, how is your T1x shooting with the ILI barrel? I'm on the fence whether to go with ILI or Lilja if I do a barrel upgrade on the 457. I can't find any info./reviews on the Calfee 4 chamber. All I have seen is 1, 2 and a modified version Padom has. I emailed ILI directly, waiting for a reply.
Last edited:
T1x with IBI barrel is shooting great, very happy with it. The Callfee 4 chamber is straight walled at .2265", has a 2° lead and is .600" long.
Decided to cut some weight and went the Bravo route. Very pleased!
Put my T1x in MDT ACC chassis, very comfortable to shot with. Plan to upgrade an IBI barrel in the future.
Here is the picture of mag well from bottom. It actually pretty easy to access as it has plenty enough room for your hand to access.
For those who have installed the Lothar-Walther, how are they shooting?
Has anyone shot any of the nwere Wolf Match Extra through their T1X? In years past, before the Wolf line was taken over, Match Extra was lights out in my 40X and Kimber 82G rifles. I am wanting to buy some again, but would really tile to know how it is shooting now under new management.
I tried some wolf match extra on Sunday. It was ok but lapua center x was shooting more consistently and tighter groups. Granted I was shooting quickly and only shot 50 rounds of the wolf so not the biggest sample size. I am going to try the new eley semi auto match when my range opens up again....
There’s a new swept bolt handle on the market for those who are looking. Looks like Anarchy Outdoors has released their version into the wild. I’ve got the Sterk on mine and absolutely love it, but it’s nice to see the selection expanding
Anarchy Outdoors are really cool. I have both Sterk and theirs on my T3X and the anarchy is a burlier design. Feels rock solid
I've been changing the way I cycle my bolt to handle cycling non swept back / 90 degree throws like the Vudoo. Using the traditional way I'm seeing military guys cycle their bolts. I'm having issues cycling that way with the Sterk swept back as when I roll my hand up it kind of just slips off the thin bolt/ball.
Yeah I have the Sterk swept bolt handle also,took a couple months to get because of back order. Just saw Anarchy outdoors bolt handle couple days ago. It’s a little different design but like you said nice to have options.
Having said that. I have a 223 VARMINT coming my way from the PX and it's getting a handle upgrade with a Sterk that I received from Australia a few weeks ago.
100yds, Everything about gun was stock, Athlon scope, SK rifle match ammo.
Yes it was cherry picked, But I don’t care, this group just made me happy!
when I have a job again and can afford more ammo I’ll do a 6by5. Till then I’m slowly watching it disappear, box by box.
Not even sure if you can still order any.. one site was saying something like 12 week delay on shipping?!?
Yes it was cherry picked, But I don’t care, this group just made me happy!
when I have a job again and can afford more ammo I’ll do a 6by5. Till then I’m slowly watching it disappear, box by box.
Not even sure if you can still order any.. one site was saying something like 12 week delay on shipping?!?
SameAll ranges in my area are locked down so consider me jealous that you got to shoot period
Would think that with 5 acres I could find more than 100yds to stretch it out, but I’ll take what I got ?..
Now if I could only find more ammo
Now if I could only find more ammo
powdervalleyinc.com order all of their SK+ if you need more ammo.
