Ask Long for the dimensions
Some of that terminology is probably not quite correct
-
Having trouble using the site?
Contact support
Like to share a few pics of my second Tikka t3x ctr. This one is in .223. It shoots super with my lapua scenar 77gr handloads. Target was at 150m, best groups, usually half an inch. It is wery nice to shoot.
Attachments
Last edited:
So my factory ctr trigger was 2lb 1oz average out of the box after I adjusted the trigger set screw it was 1lb 14oz.
Finally got my elay precision spring and she averages out at 1lb 1oz
All numbers were 5 pulls averaged out. Pretty happy with it. Can’t get much better for $9 bucks
Finally got my elay precision spring and she averages out at 1lb 1oz
All numbers were 5 pulls averaged out. Pretty happy with it. Can’t get much better for $9 bucks
Here's a Tikka in .223 (varmint hunter) that I wish was coming over to the States…model TFTT1119A10C0G0B .223 1:8 twist, under the “hunter” series…
Last edited:
Another “In the USA, what Tikka do you want to buy, but cannot?”:
Model TFTT1137A5709B0MB .223 1:8 twist
Model TFTT1137A5709B0MB .223 1:8 twist
https://choose.tikka.fi/usa?caliber=223 REM
Look through these. Supposedly the JRT models can be gotten. Try calling one of the Beretta gallery stores, see what they say, and then report back.
Beretta Gallery - Home
Straddling two continents and operating under the Beretta trademark, the Galleries constantly refine their philosophy and strategy, while maintaining intact the style that is signature of the Beretta brand and always operating in harmony with the rest of the company’s distribution channels.
berettagallery.com
Previously, I tried called a Sako Select dealer and got the long sigh…and a “no” lol. Poor bastard.https://choose.tikka.fi/usa?caliber=223 REM
Look through these. Supposedly the JRT models can be gotten. Try calling one of the Beretta gallery stores, see what they say, and then report back.
Beretta Gallery - Home
Straddling two continents and operating under the Beretta trademark, the Galleries constantly refine their philosophy and strategy, while maintaining intact the style that is signature of the Beretta brand and always operating in harmony with the rest of the company’s distribution channels.
I tried the Dallas store for a left hand TF model. No dice back then. I'm not in the market currently for anything other than the left hand t1x 22lr. That I think we will just have to wait on.
Tried the Dallas store and nada. They said it is Beretta USA that makes these decisions (not Tikka), which most everyone “knows” but it was nice to here it from the horse’s mouth, so to speak.https://choose.tikka.fi/usa?caliber=223 REM
Look through these. Supposedly the JRT models can be gotten. Try calling one of the Beretta gallery stores, see what they say, and then report back.
Beretta Gallery - Home
Straddling two continents and operating under the Beretta trademark, the Galleries constantly refine their philosophy and strategy, while maintaining intact the style that is signature of the Beretta brand and always operating in harmony with the rest of the company’s distribution channels.
Model of stock for the tikka in the pictures? Thanks.I can't get enough tikka.... but I also love my one and only Remington 700 in 300WM.
Sent from my SM-G930V using Tapatalk
Ok so I was just bitching and bitching and bitching about not being able to find ANY Tikka .223’s nor import certain other cool Tikka .223’s.
Well, I finally got lucky on Gunbroker (fingers crossed). I don’t usually show my lucky buys, but I found something even better than a .223…for me, anyway…
It’s a T3, not T3x, but I have never seen a stainless .204 T3 series, especially in a wood stock. But I haven’t been looking for years, so maybe they’re not rare. AFAIK, Tikka’s discontinued the .204 caliber as a whole, which is a bit mind-boggling as the Euros seem to like it.
I’d prefer a solid wood stock, but fudge, I jumped on this Buy It Now. Tried it ignore it for, oh, the whole of five minutes, but I am but a weak, weak, weak child of a man.
I sure hope it’s not a clunker!
Well, I finally got lucky on Gunbroker (fingers crossed). I don’t usually show my lucky buys, but I found something even better than a .223…for me, anyway…
It’s a T3, not T3x, but I have never seen a stainless .204 T3 series, especially in a wood stock. But I haven’t been looking for years, so maybe they’re not rare. AFAIK, Tikka’s discontinued the .204 caliber as a whole, which is a bit mind-boggling as the Euros seem to like it.
I’d prefer a solid wood stock, but fudge, I jumped on this Buy It Now. Tried it ignore it for, oh, the whole of five minutes, but I am but a weak, weak, weak child of a man.
I sure hope it’s not a clunker!
Last edited:
I pieced it together lol. Thanks for the info! Helped a ton
Well, stainless .204 Tikkas don't come up for sale often, and they aren't made anymore (even in non-stainless). I had basically written off finding a ss .204 Tikka, and thought I would maybe find a ss .223 and down the road, perhaps convert it. And I've been wanting to try a Tikka and to see what all the fuss is all about.
But yeah, My name is carbon and I have a problem lol
Take a look at CZ 527 prices, they are going through the roof (especially in 17 Hornet!). Frickin' rem 700 .204 and .223 rifles are stupid expensive too (especially ss). If one is more into, say, 6.5 CM, there are a lot more options and prices are reasonable-ish.
For me, primarily because they're all-weather. Rain, snow, sitting in the case for a week, etc, no problem. Secondary reasons are: less likely to show scratches, and they look pretty sharp.
I don't like the shiny blued look. However, Im good with the CTR and TacA1 matte black coating. I sold my SS t3 lite 223 for a black CTR 223 after seeing how well the TacA1 has held up for me in all conditions.
And I only have a shiny blued T1x because that's the only version available.
Still? Me too ... still. I think I'm up to two years on the waiting list for "Tikka said they should be here soon". 17 HMR in left-handed is everywhere, though - not sure if they did a big run of those first before Covid first hit, or what. But surely 22 would be a bigger seller, so I don't know why they're not getting them to market.
What kind of velocity are you getting, have you found jam? Where did you find yours Ive been looking for a 223 CTR for awhile now.
Juha, you always show up with the rifle porn...
What does Roni think about that ZC Scope ?
Hi likes the Z, hi has also seen quite many scopes, but ZCO is the best.
Like we had a Steyr SSG M1 on test, came with Trijicon Accupower 4.5-30 scope, once we change the ZCO on top of the Steyr, hi did nayled 185gr Scenar´s the steel plate like a pro
My other tikka turned into a heavy pig. Found a deal on a donor action and the manners. Glad I didn’t sell the proof prefit.
8lb 13oz. Unloaded
ETA: 10lb 4oz with my 7” can, sling, and a loaded 10 round mag
8lb 13oz. Unloaded
ETA: 10lb 4oz with my 7” can, sling, and a loaded 10 round mag
Last edited:
For a lefty option best add about 10 years to the leadtimeUhhh.... lefty?
CTR in a McMillan A3 with a ZCO on top.
My Tikka be looking good.
My Tikka be looking good.
Anyone know if someone or someplace sells Tikka barreled actions in 308 (preferably with a threaded barrel)? I have my spare CTR stock and bottom metal and would like to make a trainer of sorts for my match rifle. Honestly seems like there's not much of a supply of Tikkas in the US right now. I can't find much except on Gunbroker.
Tikka Actions for sale - Bolts - Stocks - Pre fits - Barrels
Tikka Actions, bolts, trigger, rings & Accessories - J&A Outdoors Firearms solutions offers it all! Get your tikka accessories here!
jaoutdoors.com
Thanks for the recommendation I'll look through their selection now! Anyone have any experience ordering from them?might get you startedTikka Actions for sale - Bolts - Stocks - Pre fits - Barrels
Tikka Actions, bolts, trigger, rings & Accessories - J&A Outdoors Firearms solutions offers it all! Get your tikka accessories here!
I ordered a CTR action from them a couple months back. No issues and quick shipping.
Not the cheapest Tikka deal around, but definitely one of the easiest if you’re wanting to build one.
Anyone have a Manners EH1 with the mini chassis and Mountain Tactical Gen 2 bottom metal and magazines?
My brother and I both have one and the back of the magazines seem to be hitting the chassis keeping them from seating. I’ll have a factory stock I can try later in the week.
My brother and I both have one and the back of the magazines seem to be hitting the chassis keeping them from seating. I’ll have a factory stock I can try later in the week.
When did you buy the stocks? If within the last 6 months, check the bolt stop pin cutout.
They had a handful get shipped with the cutout in the wrong spot. My EH1tk with mini chassis had to be sent back, and manners CS was awesome to work with.
I have 2 and 1 I ordered for my brother. I haven’t had one that was right yet. 2 out of 3 have been back multiple times. The 3rd and latest is going back today, all for barrel channel issues. I didn’t realize the magazine issue until I finally got the barreled action in. Might not be their problem, I’ll try and contact them today. My first had the bolt stop issue along with the barrel channel. It’s been frustrating.
They’re working with me, it’s just frustrating to keep sending them back over and over
They’re working with me, it’s just frustrating to keep sending them back over and over
Last edited:
Nice. Which bottom metal is that and what velocity are you getting out of the tikka barrel?
i just ordered a ss 308 action from them last Monday i got it on Thursday
