Troubleshooting Rem 700 sps varmit

[ZiggyFunk]

Troubleshooting. When pulling the bolt fast casings are getting stuck/flips in ejection port. When doing it slowly there's no problem. Any one knows how too fix this? See attached file

 

[MikeRTacOps]

I'd be happy to fix it for you for free if you paid the S&H to me Sir but it looks like your out of the States ?

Mike R.

 

[ZiggyFunk]

Jaa living in Denmark, so thats not an option unfortunately. But very kind offer are u maybe willing, to explain what's causing this if possible? Maybe I will be able to fix it myself?

I'd be happy to fix it for you for free if you paid the S&H to me Sir but it looks like your out of the States ?

Mike R.

Yaa living in Denmark, so thats not an option unfortunately. But very kind offer are u maybe willing, to explain what's causing this if possible? Maybe I will be able to fix it myself?

 

[MikeS_54]

Try ejecting a previously fired case, no bullet.
Your snap cap has a fake bullet making the OAL too long for the ejection port.

 

[ZiggyFunk]

Try ejecting a previously fired case, no bullet.
Your snap cap has a fake bullet making the OAL too long for the ejection port.

I will when the range opens again after newyear, last time I was on the range I had same problem though it was, due to a VERY dirty rifle. Shooting is new to me and bought the rifle used. So still learning

 

[RichMangus]

Check with real ammo and fired brass

 

[ShtrRdy]

Does the bolt have an M16 type of extractor? It's possible the ejected case is hitting the windage turret and bouncing back into the ejection port.

I'm half Danish. My grandparents came to the US in the early 1920s.

 

[FCS]

I’ve seen faulty extractor cause this issue.
Rivetless Rem 700 extractor is pretty easy to swap out.

 

[MikeRTacOps]

Jaa living in Denmark, so thats not an option unfortunately. But very kind offer are u maybe willing, to explain what's causing this if possible? Maybe I will be able to fix it myself?

Yaa living in Denmark, so thats not an option unfortunately. But very kind offer are u maybe willing, to explain what's causing this if possible? Maybe I will be able to fix it myself?

PM Inbound...

Mike R.

 

[psdan000]

bad extractor, also sounds crazy but check the torque on the stock bolts to the action. I've seen them over torqued and cause issues with extraction. not sure why. you'll want maybe 30 in/lbs max on plastic tupperware stock and 50-60 in/lbs on fiberglass with bedding...cheap and easy to try anyway.

 

[ZiggyFunk]

Big thx to MikeRTacOps, hopefully we figured out the problem and now waiting for the spare parts. Merry Christmas to you all

 

[MikeRTacOps]

Big thx to MikeRTacOps, hopefully we figured out the problem and now waiting for the spare parts. Merry Christmas to you all

Your Most Welcome anytime Sir FYI, I hit the post office today and your parts are inbound and the best part NO CHARGE
Merry Christmas and Happy New Year

Mike R.

 

[gac700]

Impressive service call and follow through Mike.