Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I was thinking about trying the RAT pad: RAT Pads | RAT Grips and adding it to my AICS riser.
Really just need to add some tackiness to the riser I already have, although I do LOVE the Victor Co. Skin - I was looking to upgrade the riser bolts for thumb screws but NOT for $33.00 for TWO bolts! UGH!
~Will
Having a stock on my R700 purchased from the folks at McRee, I did the same for my AI. It has the synthetic material thats comfortable for the cheek. The part I like best is that it has a zippered pouch on the opposite side. In the pouch I put tools needed to fit that rifle and scope. Along with extra ear plugs and a small note pad and a mechanical pencil. By doing that you always have tools on hand should you need to adjust or repair something. The pad I can keep track of round count and cleaning cycles or other info for that rifle. When the rifle is sold the note pads goes with it, giving the next owner a history log that they can refer too.
I purchased them from McRee Precision. The rear loop can be changed depending on your preference. They work for both left and right handed shooters and with dual zippers you can have it open for either side.
McRee's Precision Rear Stock PackView attachment 27879
I purchased them from McRee Precision. The rear loop can be changed depending on your preference. They work for both left and right handed shooters and with dual zippers you can have it open for either side.
McRee's Precision Rear Stock PackView attachment 27879
Thanks, needed this. Didn't want to give up 30 bucks for 2 screws.The Flat Knobs #5N25F48 From J.W. Winco Inc. M5 X 25 DIN653 FLAT KNRLD THUMB SCREW seem to really do the trick. And at under 8 bucks delivered! (I ordered an extra one - just just in case) Think I'll be going with the sticky upgrade pad from Viperskins. Thanks again for the tip!
Actually, here is the one with the brass tip, just like the AI screws
J.W. Winco, Inc. - Flat Knurled Thumb Screws with brass tip
Well gdamnit! I’ve looked there on and off and they’ve been out of stock forever and now there they are! I guess they don’t have brass tips.These are still available from Sporting Services UK https://www.sportingservices.co.uk/products/cheekpiece-thumbscrew
So I got lucky and, thanks to @CANAVAR, found some AI screws. But not after ordering the GN 653.10-M5-25-ST-MSA little update for this part number, since JW Winco has changed their URLs during a site update. I got notice from Eurooptic that AI has discontinued the official engraved item, so I went searching.
The base part is: GN 653.10
The screw is: M5
Length: 25mm (.98”)
Material of screw: ST (steel)
Material of tip: MS (brass)
Put it all together and you have:
GN 653.10-M5-25-ST-MS
Choose your options here (might be prefilled correctly by my fancy link):
GN 653.10 Steel Knurled Thumb Screws, Flat Type, with Brass or Plastic Tip
Knurled thumb screws GN 653.10 with brass or plastic tip are used in applications where marks and damages on the workpiece are unacceptable.The hewww.jwwinco.com
Note I haven’t received them yet, but the part number is the same as the item in above posts so I trust they are identical.
I’ll let you know if they are NOT the right item.
(Edit: you might be able to get shorter ones, see below)