Suppressors User serviceable 5.56/.223 can?

[Pocket]

I get there isn’t a ton of these as the 5.56 should burn out the junk. But wanting one for my vudoo .22 (looks and function)

Googled and really only seeing a paladin? And some poor review ones for USER SERVICEABLE.

Anyone have recommendations?

 

[Gasgun]

Buy a dedicated .22 can.

 

[Pocket]

Have one. Again also want for looks. I hate the way it looks as a 1” dia. And will use this on my 5.56 as well.

 

[WirgmanUSMC]

TBAC makes a user serviceable 556 can. Might be a little heavy feeling on a .22 though since it’s a heavy use rated can.

 

[Pocket]

Thanks brother, it maybe a little heavy it’s going on a bipod’d precision .22 so not horrible. Not the sexiest can there is huh. But gonna read some reviews - thanks for looking out!

 

[AK4900PA]

Griffin Armament Paladin 5 supports everything from .22lr to 22-250. I have the Paladin .300 which is dedicated to my AR's. It gets used on 22lr, 6.5 Grendel, 300blk and .308. I have a rimfire can, but I keep that on my pistol since it's very light. For my 22lr AR the rifle can looks alot better and is just as quiet if not more so than the dedicated rimfire can.

 

[Th3_Warm0ng3r]

I havent gotten mine out of jail yet but I bought a few cans from Rebel Silencers out of El Paso. They aren't that expensive and they are completely user serviceable with each baffle unscrewing. I really liked that design and have played with it at the shop and seems pretty well made. Just an option.

 

[Winchester59]

I have both a Griffin Optimus and a Griffin Optimus Micro, both user servicable. The Micro is .223 rated. I use the Micro on my Vudoo and the optimus on a .223 trainer (it can be used on up to a .300WM or configured for a 9mm pistol as it has 3 different muzzle plates, .22, .30 and 9mm. I clean the Micro in an US cleaner (I have not taken the regular Optimus apart yet) I also have 2 Gfiffin Recce 7's that I use on match/hunting rifles. Griffin Armament doesn't get much love on SH, but I have been happy with mine.

 

[FishinGuns]

A Paladin 5 is next on my list. I think it’s great to have a user serviceable for higher volume so you don’t have to send back your sealed cans when they start to accumulate some weight. That being said, spreading the wealth around to other cans helps too!

I have quite a few Griffin Armament cans and think they are the best bang for the buck out there right now.

After the Paladin 5, that Optimus Mico for my .22WMR has my attention! That’s a cool friggen can. I’d dedicate my Checkmate to .22LR then.

 

[AK4900PA]

The driving force behind my purchase of the Paladin was my AR-10 SBR. My SAS Reaper Ti isn't ideal for a 12.5" semi auto .308 so I relegated that can to bolt action use and use the Paladin for everything semi auto. My Q El Camino looked rediculous on my 22lr SBR. The Paladin looks way better under the handguard and being able to clean it is a very underrated feature in my opinion. If I owned a .223 or .224 Valkyrie I'd be all over a Paladin 5.

 

[carbonbased]

Here's a list of user-serviceable take-apart suppressors I put together.

 

[11B-B4]

Just an FYI... the Griffin Bushwhacker 46 now shares the same utility patented Ratchet-Lok end cap system of the Paladin.

 

[Fishfullthinking]

I see this is a older thread but might take a look at the tion cans. We were just talking about them on another thread.