Yo Dude, not terribly often. I’ve been shooting my oldest one (40X, same spring material) for 15 years without any issues. The extractors are harder than the brass rim, so they wear incredibly slowly. Not too much to worry about.
MB
Vudoo Gun Works V-22 Rimfire Bolt Action
- Thread starter RAVAGE88
- Start date
MB
Quite frankly that's what I was thinking - just had to ask with all the "noise" currently. Appreciate the response!
Since I have both the single shot and the magizine fed rifles I probably should look into spare parts and special tools to keep them running . Thanks again Mike for sharing with us
My single shot is left bolt right e xtraction/ loading port. The magizine fed is left bolt left extraction / loading port
My single shot is left bolt right e xtraction/ loading port. The magizine fed is left bolt left extraction / loading port
Yo Dude, I'm actually not selling parts, but instead, offering them up in exchange for an address so I can ship them. I'm going through a long list of PMs today to see what I have for those that have reached out, and if I have it, I'll circle back via PM and get your address.
MB
I'm shipping out two small boxes today, but this empties the parts bins. I'm out of Gen 1 parts and all I have left is some prototype Gen 1.2 and Gen 2 stuff that were test parts....nothing I'd want to put in long-term service. I don't have any extra action wrenches.
MB
MB
Not exactly, no one sells a complete 360 other than Vudoo because no one makes a complete ready to go action.
Mike, My comments were regarding the statement about Vudoo being the middle man or drop shipper, Vudoo produced(made available) complete, ready-to-go actions for the market, no one else did at the time including MPA or myself.
I think it’s just crazy that how much is all of a sudden is coming to light…
Pretty sure we are all surprised that they were not making any parts. They were building rifles.
So just like pretty much all other custom gun builders.
Someone will start building them again in short order I am sure.
The manufacture of the action isn’t gonna just not make them when they sell like they do.
Pretty sure we are all surprised that they were not making any parts. They were building rifles.
So just like pretty much all other custom gun builders.
Someone will start building them again in short order I am sure.
The manufacture of the action isn’t gonna just not make them when they sell like they do.
If the manufacturer doesn’t own the IP they won’t be making them. At least, not “as is” without some changes. Then again, that might be my optimism and faith in folks showing… they may keep making them and decide it’s cheaper to litigate. Though for the size of the market, I can’t see that being a good business decision given what legal fees can run!
In a second reading, perhaps you meant Vudoo would keep manufacturing them- regardless of who machines them. If so, I would agree.
Ok, I hear you, but let's try it this way.
- Vudoo doesn't make any of the parts, in-house, that they use to ASSEMBLE a complete, ready-to-go, action
- Instead, Vudoo pays some number of vendors to make the parts listed on the Bill of Materials (BOM) that make up the total assembly that we're referring to as an action
- The total of the parts listed on the BOM are referred to as the Cost of Goods Sold (COGS), which does not include burdened and non-burdened costs (labor, power, tooling, general overhead, etc.) So, let's say the COGS is $1000 and the retail price of the completed assembly is $1400
- What might one think the likelihood is that the burdened and non-burdened costs eat significantly into the $400 margin at the retail price?
- Now, let's assume that an action assembly is sold to a company that's going to create a product using this assembly; would they pay retail price? No. So let's assume, for conversation sake, dealer price is minus 20%, that leaves a $120 margin, which I'm quite certain is going to be eaten away by burdened and non-burdened costs
- So, is it fair to assume there could be sales at a loss? Well, based on the tax returns I have copies of, absolutely
Hope this helps....
MB
Last edited:
This is going to be a HBS case study...this is actually incredibly good insight into small-business and start-ups.
Better have VOLUME w those number per unit. But I don’t think it works that way w a precision product.
Exactly, volume can be an illusion due to the fact that revenue costs money. If one can't recover costs at lower volumes, it'll be worse at greater volume as the cash can't be turned over quickly enough. There are exceptions to this, but typically, the exceptions are industry specific; MIM/injection molding, most things quoted per piece, etc. More complex assemblies that are heavily sourced by supply chain are not prime volume targets. Especially with rising costs due to raw material increases, obsolescense that requires sustaining engineering that pushes a revision, WIP, finished goods inventory, and so on.
MB
Last edited:
This 100%, I am sourcing action components and assembling them currently, the COGS plus my very minimal overhead burden leaves very little room for suppling actions to dealers (I am still in my garage and have no payroll employees). No way VGW was operating in a sustainable manner. I suspected VGW had underlying solvency issues after our proposed redesign of their billet magazine went belly up (I later found out this occurred in parallel to the sale of VGW) The lack of initiative they put forward to meet the needs of the community is what initially lead me to design my magazine. It has been a pleasure to read through your insightful comments and I have learned a lot from this thread. You created an entire genre of rifles that will truly cement your legacy in the industry
Last edited:
For a measly $2mil consulting fee, you can be the next Vudoo Gunworks.
We are not currently looking for any defacto investors, thanks for the offer though! All jokes aside we have a profound respect for what VGW has accomplished. We just need to sit back and see how this story unfolds. As a very small player in this industry, I am just trying to listen more and talk less!
Someone asked if anyone was at the NRA Show this weekend to see if Vudoo was there. Here is their booth.
They are obviously all so busy moving they couldn't make the show
That doesn’t bode well for the company at all. There is some cost involved with these booths when you reserve them. I guess the new CEO couldn’t be bothered to fly a few guys out there to staff the booth because he let everyone go…
The booth rental is small change compared to travel expense, shipping for product samples and booth (and return of all that at end of the show) and the cost of paying the crews at the venue to move crates around with the forklift. I was floored the first time the venue people charged $250 to come plug in an extension cord at one particular show venue!
The company I worked for sent well above ONE MILLION $$ for the SHOT Show every year and almost as much to be at NRA, SCI, NBS and Sport Inc. (each)
I feel for the ones that put deposits down or completely paid for a build that they’ll never see. Shit like that makes me sick to my stomach
Interesting, I installed Malwarebytes software last week, and just noticed it was blocking the website due to phishing.
This thread just became much more interesting for me…. Finally found a 360 for a second build…! 
This was supposed to be a cheap winter hobby!!! WTF happened !?
Winter is over dude! Welcome to Spring! Time to build up the 2nd one at twice the price! Wait until summer ammo cost burn…
MB,
On DEFTI and the 9 Twist Barrels…
I’m confused with some of your statements and would prefer to not venture up any dead end roads…
Were you implying that 9 twist was a bad idea, or was there pushback from the rest of Vudoo? Or did they think it was a good direction and your experience said otherwise?
I followed that original thread closely as I have interest in pushing beyond established boundaries, but don’t have unlimited funds for long distance rimfire.
On DEFTI and the 9 Twist Barrels…
I’m confused with some of your statements and would prefer to not venture up any dead end roads…
Were you implying that 9 twist was a bad idea, or was there pushback from the rest of Vudoo? Or did they think it was a good direction and your experience said otherwise?
I followed that original thread closely as I have interest in pushing beyond established boundaries, but don’t have unlimited funds for long distance rimfire.
Yo Dude, great question and this is a topic I now have no issue speaking to openly. But first, I'll issue an apology (@grauhanen and others) to those that really wanted me to discuss data, and I refused as it was during the "course of battle," so to speak.
So, I'll start by saying, the fast twist project, in total, was never about just the barrels. The project in total was about the overall system, which is what the V-22 platform was designed to be. The V-22 was never just the action (@David Lott and @jelrod1 get this).
When faster twist rates came up in the beginning, Bryan Litz and I discussed it while at an event in TX. As you can imagine, it was a great conversation and Bryan said, as he always has, a number of things I was intrigued by. The majority of it I agreed with and some of it I didn't. But, anyway, the path started. Unfortunately, a parallel path started by the sales guy in St. George, one thing led to another, and they built a couple rifles using Bartlein blanks, but they had no idea what the math said and no way to even do the math. The rifles were typical 18", threaded muzzle builds and of course, they shot horribly. So, there was an immediate turn off in St. George with no ability to envision what it meant to seize an incredible opportunity.
However, I stayed on the path, developed initial data and built a rifle in my lab with a nine twist, 22" finished length with a non-threaded muzzle. Aside from the nine twist, I also had blanks made at twist rates between nine and 16, all Ace blanks. Not that it's an Ace vs Bartlein debate, as the brand isn't relevant, but I could get the Ace blanks pretty quickly and personally, it was my favorite of the blanks we were using at the time.
Anyway, my initial thoughts on the nine twist performance using the parameters that the math said should be optimal; I was highly pleased. So, I took rifles down to another NRA World Championship and the nine twist was one of them. I told no one that there were prototype parts in the nine twist gun (more than just the barrel and I said nothing about the faster twist rate), including Paul. However, I sat behind a spotting scope over the course of the entire event (I wouldn't let anyone else sit behind the scope) and called impacts on target at 200 yards and beyond and plotted data between the nine twist gun and 16 twist guns. The collective group sizes were starkly different over the course of more than 5000 rounds down range.
Following that event, I handed the rifle to Daniel Horner and he used it in classes to further the collection of data. His findings agreed with mine. However, I noted some interesting characteristics....the greater variable was a combination of ambient temperature and increased angular velocity of the projectile (remember, the projectile hardness is pretty low on the BHN scale). But, this variation validated the need for system focus, not a barrel focus. And just so everyone understands, the characteristics I noted were weird deviations in group size at distance, but based on noting conditions, one could easily detect repeatability. Perfect!
So, now, next steps were planned to focus on measures that would bring the entirety of the system into alignment, which Paul had no capacity to understand and its why I started sharing with the community. As far as Paul was concerned, the project was a failure after the wrong length barrels with threaded muzzles (I think most know how I feel about threaded muzzles on a 22LR using a 1/2-28 thread) were used.
Anyway, I made a trip down to a test range to gather more data, mostly to compare TOF between the nine twist and other twist rates. Two guys from Lothar Walther met me there, as they were part of the plan and brought rifles with them with 12 twist barrels. We did a TOF comparison using nine, 12 and 16 twist barrels and, from a system focus perspective, the nine twist was far more promising as it related to truly advancing what it meant to shoot 22LR. The 12 twist was marginally better than 16, as was the 13 I tested prior. Using a 12, 13 etc., is nothing more than maintaining status quo and accepting things related to construed conventional wisdom.
But, based on what my highly calibrated crystal ball was saying, I started clamming up and further disengaging from a group that had obviously forgotten who and what we said we were. In the beginning, it was "Envision And Create The Exceptional," but what it turned into was a real drag and it was obvious to this community.
I'll close with this. In thinking about all this stuff, I'm not sour or angry. Instead, I'm thankful and at peace that things happened to me and for me that separated me from what was dangerous and unhealthy. What was meant to be, will be.
I hope this answers your questions and clears up any confusion.
MB
Last edited:
Thank you @RAVAGE88 for this very informative post. I remember closely following the initial post and interest in the 1:9 barrel "saga" but you would only let a little bit squeak out. I remember how cryptic some of your posts were in answering questions at the time. This really helps fill in those gaps and gives me/us a better understanding of everything involved.
Not by any hard and fast rule because the environment is the largest of all variables when it comes to spitting a light, lead projectile into the atmosphere. And by the way, one lot number of 22LR ammo shoots differently from the next, and so on, which is why it was always about the system.
But, what was so awesome is, the community was hungry for it and the barrel and ammo makers were ready to jump in, and largely, all three put the throttle down. Guys in the community started building rifles, barrel makers were contributing to the testing and lathe turned bullets were on the scene....people were working together to figure all this out FOR THE COMMUNITY.
But what I found to be interesting and highly disappointing at the same time was, P&J were pissed that the phone was ringing in St. George and people were asking about the fast twist. They couldn't answer questions and had no intention of asking me anything about it. And sadly, all of this was happening while they were saying that Vudoo needed to get the sales numbers up....I'll stop there.
MB
Similar threads
