It might be perfect.... but my 25CM needs a scope too! If I can scratch up the funds, I might just order a ZCO for the CM and leave the AMG on the Vudoo. I also have a NX8 4-32 on an airgun for a side-by-side comparison tomorrow, so it's all really a work in progress for now.
-
Having trouble using the site?
Contact support
Vudoo Gun Works V-22 Rimfire Bolt Action
- Thread starter RAVAGE88
- Start date
Place Holder!!!
V22 Ravage with Ridgeback Stock, 20" Ace Kukri Barrel, 40 Mao rail, NF NS8 4-30 & ARC Rings has been ordered. just got 14 more weeks to go.
V22 Ravage with Ridgeback Stock, 20" Ace Kukri Barrel, 40 Mao rail, NF NS8 4-30 & ARC Rings has been ordered. just got 14 more weeks to go.
It's a long wait.... but totally worth it! They actually center-punched the 12-14 week estimate, with a lucky 13.
16 weeks... Ouch! Plenty of time to read thru this whole thread and learn... that's what kept me distracted during the wait. So thanks to everyone who posted (especially with pictures) and I hope to contribute myself in short order!
Dude, learn how to take a picture, some decent lighting and a uniform back drop, have some pride!
Dumb question time-what are those corded items hanging from the scope base?
Can the Vudoo fit without modification into the MDT chassis offerings?
Last edited:
I can vouch for the ACC as I've run my Vudoo in many ACC chassis.. No modifications necessary, and the default ACC mag latch fits the magazine perfectly.
Not sure what you are using for a dope card holder but I made a bunch of these if you wast oneI’m limited to where I can take pictures inside, outside is not an optionI’ll take a nice picture of it tomorrow, just for you! Lol
Attachments
Maybe this one is betterDude, learn how to take a picture, some decent lighting and a uniform back drop, have some pride!
Maybe this one is better
The new iPhones take really good pictars.
What can't be seen in this photo is the 30 MPH winds we were shooting in this morning and Kody's rifle was giving him fits so he pulled out his beautiful Vudoo to make himself feel better. Don't feel too sorry for him, he's rolling a TT in favor of a ZCO and his other shit is just as nice. So, crocodile tears only for him fellas.
Thanks again Kody, and Steve, for having us out. It was great regardless of that howling wind. Man it was blowing.
FIFYThe new iPhones take really good pictars.
What can't be seen in this photo is the 30 MPH winds we were shooting in this morning and Kodi's rifle was giving him fits so he pulled out his beautiful Vudoo to make himself feel better. Don't feel too sorry for him, he's rolling a TT in favor of a ZCO and his other shit is just as nice. So, crocodile tears only for him fellas.
Thanks again Kodi, and Steve, for having us out. It was great regardless of that howling wind. Man it was blowing.
had a blast today, minus messing up 100rds of 6CM.
Preliminary result with the vudoo in the manners is good, no feeding issues. Will do more testing later on this week
I’m really liking this new Manners stock. I have a friend with one and really like the feel. I’ve got my rifle in an MPA chassis though and I just can’t justify the cost of a new stock when mine functions so well. Maybe when I hit Lotto I will get one though and maybe another Vudoo to go in it.Maybe this one is better
That's my situation. Really hard for me to justify a new stock when my current one does everything I need. Maybe if I get some strange windfall of cash that doesn't have to anything specific!
Here's my crappy iPhone pics from the range yesterday.... I'm a lousy photographer, but will try for a more glamorous pose next time I'm out!
Initial impressions are off the charts... this rifle shot everything from Std+ to Midas into nice ragged holes at 50yd, and I claim all responsibility for what variance was present. Everything was sent through the El Camino as well, so it will come off for serious groups.
My AMG would almost-not-quite focus at 25yd, so I'm thinking about swapping it for the NX8 on an air rifle. Any other suggestions for a mid-to-high quality scope that will focus down to about 10yd or so? I really like the finicky factor of the NX8 on the airgun, as it works great for range finding. Just might be too finicky for the V-22 though, as it's range of capability is much greater and will probably be used with a LRF. I would also like to keep the weight reasonable, as the balance with the AMG felt good. Maybe that March High Master that's due out soon, or ?!?
Initial impressions are off the charts... this rifle shot everything from Std+ to Midas into nice ragged holes at 50yd, and I claim all responsibility for what variance was present. Everything was sent through the El Camino as well, so it will come off for serious groups.
My AMG would almost-not-quite focus at 25yd, so I'm thinking about swapping it for the NX8 on an air rifle. Any other suggestions for a mid-to-high quality scope that will focus down to about 10yd or so? I really like the finicky factor of the NX8 on the airgun, as it works great for range finding. Just might be too finicky for the V-22 though, as it's range of capability is much greater and will probably be used with a LRF. I would also like to keep the weight reasonable, as the balance with the AMG felt good. Maybe that March High Master that's due out soon, or ?!?
I had one from the group buy that I ended up selling, it required a lot of weight to get it to balance, up into the 19lb territory. It is pretty nice, though I run my grip pretty far forward so the grip was a little too far back for my liking.
Is anyone running or has played with a Grayboe NEO? Seems like I could get that thing to be a light balanced NRL22 working chassis for the Vudoo.
I just really like my Bravo stock. I've considered changing but it works great for me.Hey a $1400 stimulus check might fit the bill. We are trying to stimulate the economy right. Unfortunately I don’t think my wife would see that the same way I do.
Luckily for me, I shoot with Kodi often and get to see and touch his shit. Also luckily for me, Kodi has really good taste and likes the finer things when it comes to guns. He's also very kind and lets us finger fuck all his goodies. In fact, he encourages it.
There's other guys with nice shit too and they are also just as good at sharing as Kodi.
How well does your recoil sensed work strapped to the scope? I received mine a couple of weeks ago and have not used it yet.
Always man, sharing and letting people check out the toys is half the fun!I just really like my Bravo stock. I've considered changing but it works great for me.
Luckily for me, I shoot with Kodi often and get to see and touch his shit. Also luckily for me, Kodi has really good taste and likes the finer things when it comes to guns. He's also very kind and lets us finger fuck all his goodies. In fact, he encourages it.
There's other guys with nice shit too and they are also just as good at sharing as Kodi.
Bolt stops changed on the Gen two revision. The bolt has raceways on the back half of the bolt body behind the lugs.
Yep... Q El Camino suppressor on the Vudoo.... the 25 cal RAW is actually louder! Need to work on that... it's can is really poorly designed (and way to fat).
I'm with Jefe's Dope on the Bravo... ended up picking it to be similar to my 25CM with the same stock, and am totally digging both.
The Piet trigger is awesome... the "wire loop around the turret" drops the sensitivity for 22LR or other low recoil applications. He has some great video content that explains some of the tweaks and such. I was having trouble on the RAW, as adjusting the LabRADAR sensitivity to trigger with the shot made it impossible to work the action without triggering.... ended up turning the RADAR off then back on for each shot.
I'm with Jefe's Dope on the Bravo... ended up picking it to be similar to my 25CM with the same stock, and am totally digging both.
The Piet trigger is awesome... the "wire loop around the turret" drops the sensitivity for 22LR or other low recoil applications. He has some great video content that explains some of the tweaks and such. I was having trouble on the RAW, as adjusting the LabRADAR sensitivity to trigger with the shot made it impossible to work the action without triggering.... ended up turning the RADAR off then back on for each shot.
I received mine a week or two ago. It was exactly 18 weeks to the day I ordered. Was quoted 12-14 weeks.Has wait time been pretty accurate for you?
Date of order was 30NOV, and at that time it was 14 weeks....
Asking for a friend....
Has wait time been pretty accurate for you?
Date of order was 30NOV, and at that time it was 14 weeks....
Asking for a friend....
Slightly over estimates (+3 weeks) for 5+ barreled actions. All things considered (covid, work quality, order book, etc.) not too bad.
They nailed the 12-14 week estimate for my complete rifle... it arrived at the FFL exactly 13 weeks from the date of order (and I arrived about 11 minutes later).
Lightened things up! Put back on the AMG, shifted weights around, and put the new long thread protector from @Tiger_Shilone (thank you!)
18" Kukri, in a full length ACC. Rifle with 15 round aluminum magazine as pictured down to 16.4lbs. Shaved off 2 pounds while still being able to free balance it on a barricade.
18" Kukri, in a full length ACC. Rifle with 15 round aluminum magazine as pictured down to 16.4lbs. Shaved off 2 pounds while still being able to free balance it on a barricade.
Bit the bullet and just submitted an order form. Waiting for the call to place the order and submit deposit.
Do I sell my barreled action first or wait until the new one arrives?
What's the deposit and current wait time?
What are you doing?Bit the bullet and just submitted an order form. Waiting for the call to place the order and submit deposit.
Do I sell my barreled action first or wait until the new one arrives?
What's the deposit and current wait time?
Just considering going with the 22" MTU vs. the 18" Kukri I currently have. Thinking it's better to keep the perfectly functioning barrel with its action. Be a shame to separate them as it shoots very well as is. Gonna keep the current barreled action until I shoot the new one. Then decide If I'll sell one or the other or keep both. I really don't know yet.
You'd be crazy not to keep both.Just considering going with the 22" MTU vs. the 18" Kukri I currently have. Thinking it's better to keep the perfectly functioning barrel with its action. Be a shame to separate them as it shoots very well as is. Gonna keep the current barreled action until I shoot the new one. Then decide If I'll sell one or the other or keep both. I really don't know yet.
Once I get my LH, I'm keeping my RH..
Just considering going with the 22" MTU vs. the 18" Kukri I currently have. Thinking it's better to keep the perfectly functioning barrel with its action. Be a shame to separate them as it shoots very well as is. Gonna keep the current barreled action until I shoot the new one. Then decide If I'll sell one or the other or keep both. I really don't know yet.
The 10oz muzzle protector really changed the entire balance of the rifle. I actually think now with the ACC and muzzle protector, it's actually equally effective to a MTU now. The KSS ATS tuner is 8oz so might be worth slapping that on the 18" Kukri and see if its pretty effective.
I guess if you're running a KRG it'll be harder since you don't have that additional 4" of chassis to move the weight to torque. For example in my ACC, I moved 4 of the internals closest to the mag well since the torque by putting 1lb at the muzzle really shifted the balance a ton.
So you can shoot them both at the same time!
Similar threads
