What do you hope will be revealed at SHOT Show? Or 2020 in general.

[richthe1]

Most of mine are probably pipe dreams, but here’s my wish list:

1. Vortex releases a 1-8 LPVO to compete with the ATACR 1-8.

2. Vortex releases a Razor Gen III line that has an optional built-in HUD like the REVIC scopes and links to Kestrel/AB.

3. Accuracy International releases .223 conversion.

4. Accuracy International releases an AXSR in SA calibers from the factory. Not a SA AXSR, just an AXSR that I can purchase from the factory in a SA caliber instead of having to buy 300 WM, 300NM, etc. first.

 

[Uspsa2011]

I hope they reveal something that will be available before the 2021 shot show.

 

[Mike Casselton]

A <$500 scope that completes head to head with scopes costing >$1500...
?

 

[blbennett1288]

Due to the greatly discounted Leica LRF Binos. I think Leica will release a bluetooth LRF Bino

#3 isnt going to happen from AI, but @trophyhunter will have it.
#4 isnt going to happen from AI either. If they do offer any SA calibers from the factory it will be in a SA AXSR. We haven't seen discounted SA AX's yet (like they did with the AXMC), so I think this is still a couple years out. Hell, AXSRs aren't even available yet, just the ASR kits.

 

[powerspc]

I hope they reveal something that will be available before the 2021 shot show.

I hope they reveal something that will be available either 1) Ever, or 2) Before the 2024 SHOT Show

 

[Cjwise5]

3. Accuracy International releases .223 conversion.

4. Accuracy International releases an AXSR in SA calibers from the factory. Not a SA AXSR, just an AXSR that I can purchase from the factory in a SA caliber instead of having to buy 300 WM, 300NM, etc. first.

I'll piggy back on AI... I wish they would make a competition style chassis where the barreled action sits lower in the system and has some comp specific features like full length arca and a barricade stop built in.

Better yet, I wish MDT would make their ACC for the AI barreled actions.

 

[THEIS]

I'll piggy back on AI... I wish they would make a competition style chassis where the barreled action sits lower in the system and has some comp specific features like full length arca and a barricade stop built in.

Hi,

You may want to check out @samb300 chassis then!!

Sincerely,
Theis

 

[blbennett1288]

I'll piggy back on AI... I wish they would make a competition style chassis where the barreled action sits lower in the system and has some comp specific features like full length arca and a barricade stop built in.

Better yet, I wish MDT would make their ACC for the AI barreled actions.

@samb300 's Accuracy Obsession chassis

Introducing the AI Obsession Chassis

Some of you may remember a few years ago I drew a concept for an "AIAC" competition chassis for the current AI rifle platform. Nothing ever really came from that outside of some good conversation between fellow AI fans and competition rifle shooters. That concept has been a bug in my brain...

www.snipershide.com

 

[rlsmith1]

8.6 Creedmoor or whatever it's gonna be called

 

[kthomas]

MDT to re-release the greatest precision rifle chassis ever made - the JAE-700. More precision .22 action options, with a R700 footprint.

Personally, there's nothing I'm really left with wanting. Lot's of great options available these days across the board for precision rifle gear.

 

[steve123]

A close -ish copy of the Anschutz 1727 Fortner biathlon action, but the action also being "the chassis", so AR furniture could be hung off of it, and made specifically for the 6mmBR - taking 10 round mags.

There I just made someone else a millionaire!

Less expensive scopes with close focus and all .2 mil reticles.

 

[W54/XM-388]

Hoplite Rifles!

 

[JC0352]

I’d like to see a CZ 457 in a KRG Bravo.

.224 Valkyrie barreled actions

 

[teddy12b]

I'd like to see a compact precision rifle that can be folded up and fit into a normal backpack that would weigh less than 9# with a scope attached.

 

[AbbyKatt]

I'd like a 12x rangefinding binos that will talk with the Kestrel. Maybe Leica is heading that way. But at what price point?

 

[MDT_Josh]

I'll piggy back on AI... I wish they would make a competition style chassis where the barreled action sits lower in the system and has some comp specific features like full length arca and a barricade stop built in.

Better yet, I wish MDT would make their ACC for the AI barreled actions.

Your collective wishes are our commands. You can always request inlets and different things that we don't offer by following this link and letting us know!

Ps. I like what @samb300 is doing too! Keep up the good work buddy.

Josh

 

[Hollywood 6mm]

I just want a 12-14 round AW pattern DSDF magazine that's as reliable as the AIAW mag. @MDT_Josh I'm lookin' at YOU.

 

[blbennett1288]

I'd like a 12x rangefinding binos that will talk with the Kestrel. Maybe Leica is heading that way. But at what price point?

Realistically $3500 +

 

[AbbyKatt]

Realistically $3500 +

Yeah... and at that price I'd be afraid to take it outside to use!

 

[mrtoyz]

I’d been told from a good source that Leica was going that direction I’m excited even if it carries the big price tag. Would be ideal if they made a 12x but seems unlikely based on what they currently make.

 

[bigdaddydmd]

I am about done holding my breath for a Vortex Razor AMG 3-18. The Burris XTRIII 3.3-18 when they field the illuminated version is likely going to fill that void. Be nice to see the AMG 3-18 show up and be ready for purchase, but I doubt that will happen.

 

[cherokeefan03]

A RAPTAR that only has the ranging laser would be pretty nice.

 

[Gunfighter14e2]

A man portable 325KW phased plasma that only weighs 7.2Lbs with power supply,..

 

[Winny94]

I'll piggy back on AI... I wish they would make a competition style chassis where the barreled action sits lower in the system and has some comp specific features like full length arca and a barricade stop built in.

Better yet, I wish MDT would make their ACC for the AI barreled actions.

Based on the feedback from @samb300, AI knows what they build (which is not a competition rifle) and they have next to zero interest in deviating from it.

 

[b2lee]

Vortex 6-36 Razor..
MDT JAE-700LA.
MDT 10rnd 300PRC Magazine.
XFR brass analyzer to show alloy composition, thickness and measurements to key datum lines....and be less than $10k
Optical rifle level with blue tooth connection to a shock collar so I'll keep the rifle level.
12 inch Sister Mary Margeret Ruler that slaps my hand when I slap the trigger.
Size 15 boot that hits me square in the rectal hole when I line up non-square to my rifle and pull the trigger.

That's about all I needs next year.

 

[Stag556]

AI actually selling the new mlok rail with arca built in would be nice.

 

[blbennett1288]

AI actually selling the new mlok rail with arca built in would be nice.

I asked AINA and they said "I can't confirm at this time if the ASR tube will be offered as an accessory in the future."

 

[rtB]

I'm thinking an automated tripod with integrated LRF and ballistics so I can kick back and barbeque at matches.

 

[Stag556]

I asked AINA and they said "I can't confirm at this time if the ASR tube will be offered as an accessory in the future."

I love my AX but sometimes I wonder if the term “we’ve always done it this way” is plastered on all the walls in that place.

 

[AIAW]

2020 in general... no more MIL vs MOA threads! That is my only wish.


Maybe an orderable MilSight S140-D...

 

[Alabusa]

A <$500 scope that completes head to head with scopes costing >$1500...
?

Haven't you seen all the Arken threads??

 

[DOA]

KRG to get on board with making their Tikka stocks LEFT hand.

 

[Mike Casselton]

Haven't you seen all the Arken threads??

Arken?
Wut dat?

Looks like a nice scope, except for the upper half of the reticle.
The shilling has been over the top though.

Been checking the threads every day, but the new posts are tapering off

 

[el-wood]

I just hope the NRA announces that they will actually start fighting for our rights I.E. WA and VA.

 

[samb300]

- Thunderbeast 6” 338 Ultra
- Vortex Razor Gen3 with tool-less zero adjust

 

[Steel+Killer]

2020 in general... no more MIL vs MOA threads! That is my only wish.

Yea me too.......Did we ever decide which one was better ......LOL

All I want is some Hornady factory ammo loaded with their new A-Tips. My reloading shed has turned into a storage shed and it doesn't look like its getting straightened out anytime soon.

 

[AIAW]

Yea me too.......Did we ever decide which one was better ......LOL

All I want is some Hornady factory ammo loaded with their new A-Tips. My reloading shed has turned into a storage shed and it doesn't look like its getting straightened out anytime soon.

LOL, yeah. "The one that isn't metric and shit".

Oh you gotta clean that out or have a yardsale/giveaway. Can't have your reloading space encroached upon!

 

[dttheliman]

300 PRC brass , not made by Hornady....

 

[b2lee]

300 PRC brass , not made by Hornady....

I'll fix it for you:

Affordable brass not made by Hornady.

 

[acudaowner]

self warming tube socks , and a flash gordon ray gun ... or at least the pic someone posted of his gun with a telescope mounted ( taped ) on it thought that was funny at the time .

 

[dttheliman]

I'll fix it for you:

Affordable brass not made by Hornady.

Forgot about the hand turned megabuck brass - the idea of that stuff gives my old ass the money sweats, I think I’ll mix some pappy 23 yo with coke , so I can chug it while I’m being poor!

 

[MOUNTIC]

A 3-18 AMG with a decent thicker FFP reticle for hunting. Think along the lines of the Mil-R, MR2. I would buy 3 of them. As long as the FOV is on par with the ZP5 3-15 and 3-20 US. And NOT over $2500. I'll keep dreaming though...

 

[b2lee]

Pappy Van Winkle 23yr != poor....and why you mixing it with Coke? I sip that stuff like it's the last bottle and savor it until the last drop.

 

[Winny94]

A 3-18 AMG with a decent thicker FFP reticle for hunting. Think along the lines of the Mil-R, MR2. I would buy 3 of them. As long as the FOV is on par with the ZP5 3-15 and 3-20 US. And NOT over $2500. I'll keep dreaming though...

And an AMG w/ the EBR7C

 

[Alpine 338]

A RAPTAR that only has the ranging laser would be pretty nice.

They have one in the works, which I got to play with a prototype just briefly. Unfortunately, I'm told it will only be available to Mil/Govt agencies.

 

[Cheyenne Bodie]

A VP9LT with goddamn optic cut that keeps the rear sight.

Civilian MP7.

HK/AR500 Ballistic Boba Fett armor.

Lots of poor people crying.

 

[dttheliman]

Pappy Van Winkle 23yr != poor....and why you mixing it with Coke? I sip that stuff like it's the last bottle and savor it until the last drop.

Me too bud - the bourbon gods would strike me down for such sacrilege

 

[b2lee]

Lots of poor people crying.

So...same as 2019?

 

[Alpine 338]

Powder and Primers on the shelves after the election.

 

[LeftyJason]

Actually being able to order the stuff that they have on https://choose.tikka.fi/usa.

Lefty (adjustable or not) stainless CTR anyone?