Suppressors Where to send suppressor for Cerakote?
- Thread starter pyplynr
- Start date
Re: Where to send suppressor for Cerakote?
Accurate Ordnance can do it. Shoot them an email.
http://www.accurateordnance.com/contact/
Accurate Ordnance can do it. Shoot them an email.
http://www.accurateordnance.com/contact/
Re: Where to send suppressor for Cerakote?
I have had cans Cerakoted. The matte black non-bake product was used with good result. HOWEVER, make sure your engraving is deep enough to still show through the coating. If it appears too shallow, tape it off and live with the bare patch. Or hit it with SCARmore. I mean stove black.
I have had cans Cerakoted. The matte black non-bake product was used with good result. HOWEVER, make sure your engraving is deep enough to still show through the coating. If it appears too shallow, tape it off and live with the bare patch. Or hit it with SCARmore. I mean stove black.
Re: Where to send suppressor for Cerakote?
HP Customs in Lake Forest, Ca has an SOT and are a Certified Cerakote place. Hal has done several of my guns and is great.
http://www.hpcustomandcoatings.com/
HP Customs in Lake Forest, Ca has an SOT and are a Certified Cerakote place. Hal has done several of my guns and is great.
http://www.hpcustomandcoatings.com/
Re: Where to send suppressor for Cerakote?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: popndrop</div><div class="ubbcode-body">HP Customs in Lake Forest, Ca has an SOT and are a Certified Cerakote place. Hal has done several of my guns and is great.
http://www.hpcustomandcoatings.com/
</div></div>
Who's going to send their can to CA to get Cerakoted? I don't think that would work too well.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: popndrop</div><div class="ubbcode-body">HP Customs in Lake Forest, Ca has an SOT and are a Certified Cerakote place. Hal has done several of my guns and is great.
http://www.hpcustomandcoatings.com/
</div></div>
Who's going to send their can to CA to get Cerakoted? I don't think that would work too well.
Re: Where to send suppressor for Cerakote?
OC Armory in Lake Forest, CA also has the ability to buy/sell supressors in CA to qualified persons. Might be able to help out in terms of sending one for refinishing, Ask for Mike - Owner.
OC Armory in Lake Forest, CA also has the ability to buy/sell supressors in CA to qualified persons. Might be able to help out in terms of sending one for refinishing, Ask for Mike - Owner.
Re: Where to send suppressor for Cerakote?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pyplynr</div><div class="ubbcode-body">I'm wanting to send my suppressor out for Cerakote. Can I send it to a regular paint shop with a FFL or does it have to be a SOT? Whichever the route I must go, what recommendations do you have for this project? </div></div>
The place doing the work by regulations is supposed to be a Manufacturer/SOT.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pyplynr</div><div class="ubbcode-body">I'm wanting to send my suppressor out for Cerakote. Can I send it to a regular paint shop with a FFL or does it have to be a SOT? Whichever the route I must go, what recommendations do you have for this project? </div></div>
The place doing the work by regulations is supposed to be a Manufacturer/SOT.
Re: Where to send suppressor for Cerakote?
Find someone local to you..... call them and ask if it could be done while you wait. Take the suppressor and paperwork with you. Have it done and wait the 30 minutes it needs in the oven. Done.
Find someone local to you..... call them and ask if it could be done while you wait. Take the suppressor and paperwork with you. Have it done and wait the 30 minutes it needs in the oven. Done.
Re: Where to send suppressor for Cerakote?
I appologize. I had not taken in consideration it being a form 1 build.
I appologize. I had not taken in consideration it being a form 1 build.
Re: Where to send suppressor for Cerakote?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Superdave</div><div class="ubbcode-body"> I appologize. I had not taken in consideration it being a form 1 build. </div></div>
It's not. It's a TBAC 30p-1. It's black and I'd like to get it done in tan or fde.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Superdave</div><div class="ubbcode-body"> I appologize. I had not taken in consideration it being a form 1 build. </div></div>
It's not. It's a TBAC 30p-1. It's black and I'd like to get it done in tan or fde.
Re: Where to send suppressor for Cerakote?
Give us a call, we can re-coat it for a minimal cost.
Give us a call, we can re-coat it for a minimal cost.
Re: Where to send suppressor for Cerakote?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Zak Smith</div><div class="ubbcode-body">Give us a call, we can re-coat it for a minimal cost.</div></div>
Sent an email. Thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Zak Smith</div><div class="ubbcode-body">Give us a call, we can re-coat it for a minimal cost.</div></div>
Sent an email. Thanks
Re: Where to send suppressor for Cerakote?
buy a 20$ or less airbrush, a bottle of cera from brownells and toss is in the oven when done, but the airdry is better then the bake for cans, it will last longer and take more heat...
why would you pay someone else to do this?...
its like a 15min job at best...
buy a 20$ or less airbrush, a bottle of cera from brownells and toss is in the oven when done, but the airdry is better then the bake for cans, it will last longer and take more heat...
why would you pay someone else to do this?...
its like a 15min job at best...
Re: Where to send suppressor for Cerakote?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ring</div><div class="ubbcode-body">cera and dura go on the same way, same prep... </div></div>
Same prep maybe but Cerakote is in a league of its own. Duracoat is not even close in performance.
Accurate Ordnance refinished suppressors. Contact Mark on here (Bookhound) and he can get you squared away.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ring</div><div class="ubbcode-body">cera and dura go on the same way, same prep... </div></div>
Same prep maybe but Cerakote is in a league of its own. Duracoat is not even close in performance.
Accurate Ordnance refinished suppressors. Contact Mark on here (Bookhound) and he can get you squared away.
Similar threads
