Rifle Scopes Who makes the absolute lowest scope mount on the market?
- Thread starter Winny94
- Start date
APA makes some Low 34mm rings, I have a set for my hunting rifle with an ATACR 4-16. They are measured from the bottom of the ring to the center of the optic.
www.americanprecisionarms.com
34mm Scope Rings*
APA's patented Tru-Loc scope rings are built to higher standards than any other scope rings on the market to date. Our rings go through a quality control process that eliminates any ring that has .0005 of runout or cant. The relationship between the bottom of the ring to the center bore where...
Don't know about the lowest but MPA makes a 1.060" but the problem you run into depending on your specific scope is having enough clearance for the erector housing
MPA BA Bolt Action Mount - MasterPiece Arms, Inc.
MPA BA Bolt Action Mount – 30mm, 34mm, 35mm & 36mm MPA produces one of the most popular mounts in the PRS. Used by the best shooters in the country, our BA Mounts have hosted the optics of shooters winning multiple PRS, NRL and F-class local and national championship matches. The BA Series...
masterpiecearms.com
I can afford 1 top tier piece of glass, so it bounces between 2 rifles, so I very much prefer a mount if possible
Rings should line up on both. I move my scopes around all the time without taking them out of rings.
looks like the milled out the center of the base to help with that (and lighten it as well).Don't know about the lowest but MPA makes a 1.060" but the problem you run into depending on your specific scope is having enough clearance for the erector housing
MPA BA Bolt Action Mount - MasterPiece Arms, Inc.
MPA BA Bolt Action Mount – 30mm, 34mm, 35mm & 36mm MPA produces one of the most popular mounts in the PRS. Used by the best shooters in the country, our BA Mounts have hosted the optics of shooters winning multiple PRS, NRL and F-class local and national championship matches. The BA Series...masterpiecearms.com
Really? Now I gotta see how common that is becuase that would solve a few issues
Yea, as long as the rails are within spec, you should be good. Your rings are going to stay the same distance apart. I swap between rifles now with my rings
Near does, but you might have to call or email them as their website is old.
Badger makes a few rings that are lower than what you listed. Just go on their site and you can shift through the various models. If you have a quality (aka to spec) scope base, you won’t have an issue swapping between systems.
If you don’t have a to spec/quality base, go get one (Badger, Area 419, Nightforce) and put it on your action before mounting your scope. ZERO reason to have an out of spec base (especially if you know it’s out of spec) on a weapon system.
If you don’t have a to spec/quality base, go get one (Badger, Area 419, Nightforce) and put it on your action before mounting your scope. ZERO reason to have an out of spec base (especially if you know it’s out of spec) on a weapon system.
Similar threads
