Night Vision WTS - CUBA ! (COTI USB BATTERY ADAPTER)

[wigwamitus]

After literally 5 years of development effort (on an off), we are finally able to offer a COTI USB BATTERY ADAPTER = COTI

This unit will power the COTI for a zillion hours with a standard USB battery in a pouch on your helmet or in your pocket. And for me, who goes out in sub-zero temps, prevent the "low battery in 10 minutes" syndrome

The cable has a step down circuit to ensure the COTI only gets is desired 3V of power.

So if you need a battery solution for your COTI, head on over to SOK and grab one !

The CUBA (COTI USB Battery Adapter)

The 2nd Generation CUBA has been upgraded with a Lemo connector to work with devices such as Anvis, Oasys, etc. The CUBA consists of a DC jack battery replacement, a ported cap and a positive terminal pad for CR123A battery backup. A voltage regulated cable with a right-angle DC plug and a...

strictlyoffensivekit.com

==
Now, I'd like to thank the team that made this happen:

Shack - prototype assembler - put up with my redesigns and testing for years with the early versions.

Parker - This literally would not have happened without whowhatwherehownowbrowncow bugging the crap out of me to prioritize this project for the past 3 years.

CORYT - Production assembler - flawless execution on parts and materials. This thing is literally made out of "magic juice" thx to Cory. I've done literally hundreds of repeats of twisting on the cap and twisting it off, trying and trying to break it. And inserting and removing the plug over and over 300 repeats, 3 times. And even yanked it out by the cable a few dozen times (don't try that at home )

Preston - for the marketing and financing to make it real.

And dumb ole me who had the original idea (cause of the annoying 10m low batt warning ) and acted as product mangler throughout.

Enjoy !!

 

[jwramp]

So sick! Great job guys. Now maybe someone will scoop up my COTI for sale before I decide to keep it and get one of these…

 

[CoryT]

Just a note, custom cables will be available, and I'm working on caps for the DTNVS and IR Patrol units as they use the same battery. A dual port option for the DTNVS to run both off the battery will be done shortly, the IR Patrol does not need a step down module, it can run right off the USB 5V port.

 

[Fongman]

Just a note, custom cables will be available, and I'm working on caps for the DTNVS and IR Patrol units as they use the same battery. A dual port option for the DTNVS to run both off the battery will be done shortly, the IR Patrol does not need a step down module, it can run right off the USB 5V port.

By chance would the DTNVS version work with a DTNVG?
Thanks in advance.

 

[CoryT]

By chance would the DTNVS version work with a DTNVG?
Thanks in advance.

I don't know, I don't have a DTNVS here to compare the cap/thread. If the caps are the same, then yes, it would work. If not, I'd need a DTNVS here to get the proper thread built in Solidworks.

 

[Capt_Right]

I don't know, I don't have a DTNVS here to compare the cap/thread. If the caps are the same, then yes, it would work. If not, I'd need a DTNVS here to get the proper thread built in Solidworks.

Caps are not the same. Threads on the DTNVG are fine while the updated DTNVS are course.

 

[CoryT]

Guess I need someone with a DTNVG to either measure a cap or loan me a unit for a few days to get one modeled. For other units that have a remote power port, I need to start getting the connector type, input voltage and polarity/wiring of the connector.

 

[CoryT]

OK, I'm modeling the DTNVS cap this weekend, and I'm getting connector specs and voltages for L3 systems as well. We'll make cables for the PVS-31/15/GPNVG-18 to L3 specs, which should work with other systems using the same connector. I'll need some volunteers for testing those, as I don't have any of those on hand at the moment. If anyone has another system that they need a cable for, contact me via PM and we'll see what we can do.

 

[jwramp]

OK, I'm modeling the DTNVS cap this weekend, and I'm getting connector specs and voltages for L3 systems as well. We'll make cables for the PVS-31/15/GPNVG-18 to L3 specs, which should work with other systems using the same connector. I'll need some volunteers for testing those, as I don't have any of those on hand at the moment. If anyone has another system that they need a cable for, contact me via PM and we'll see what we can do.

Sick - I have COTI and PVS-15/MOD-3b/RNVG/1531/31a/DTNVS on hand between me and some local buddies that would be happy to take some measurements/multi-readings for you.

 

[Fongman]

Caps are not the same. Threads on the DTNVG are fine while the updated DTNVS are course.

Bummer. But thanks for the info!

 

[CoryT]

We are working on getting the threads for the DTNVG, should not be a real problem.

 

[wigwamitus]

We still got a few Cubans left, get'em while they last !!

 

[CoryT]

OK, the DTNVS prototype cap is working, so I'll make up a splitter cable and that's one goggle setup done!

 

[wigwamitus]

Just got some more CUBAns in ...

The CUBA (COTI USB Battery Adapter)

The 2nd Generation CUBA has been upgraded with a Lemo connector to work with devices such as Anvis, Oasys, etc. The CUBA consists of a DC jack battery replacement, a ported cap and a positive terminal pad for CR123A battery backup. A voltage regulated cable with a right-angle DC plug and a...

strictlyoffensivekit.com

 

[CoryT]

Splitter housing is complete, the prototype cap for the Trijicon IR Patrol M300W / Skeet is also done.

 

[wigwamitus]

Still some CUBAns on the shelf !

 

[E-Tool]

Just ordered one

 

[CoryT]

Get one while they are in stock, I’ve got a PR7 class starting plus some other work that will put the next batch about three weeks out.

 

[wigwamitus]

Still some left !

The CUBA (COTI USB Battery Adapter)

The 2nd Generation CUBA has been upgraded with a Lemo connector to work with devices such as Anvis, Oasys, etc. The CUBA consists of a DC jack battery replacement, a ported cap and a positive terminal pad for CR123A battery backup. A voltage regulated cable with a right-angle DC plug and a...

strictlyoffensivekit.com

 

[wigwamitus]

Ok, as of now we are sold out on these. Let us know if there is any further interest and we will consider making up some more. Thanks to everyone who participated !!

 

[CoryT]

I know there will be at least one more customer shortly, he’s still on the road home from class.

 

[Fongman]

Was kinda hoping a COTI / DTNVG version would make it. If it ever does I'd like to buy one. But understand it's a long shot. You guys did a good job on these.

 

[CoryT]

I have that made up already and I’m using it now. On one hand, the battery life on the DTNVS makes a remote power supply less useful, on the other, of you have a COTI and run the battery pack, why not run both? This may end up a custom item, not sure they will want to stock it.

 

[Glassaholic]

Ok, as of now we are sold out on these. Let us know if there is any further interest and we will consider making up some more. Thanks to everyone who participated !!

I didn’t realize this was only a one run possibility, if I’d known that I would have bought one earlier but didn’t have a “need” for it right now. So consider me in on one for the next go round Joe

 

[WhereNow&How]

I didn’t realize this was only a one run possibility, if I’d known that I would have bought one earlier but didn’t have a “need” for it right now. So consider me in on one for the next go round Joe

With the supply chains breaking down like they are, now is the time to get anything you have a "need" for.

Who knows when or if certain things will be available, especially a specialty item like the CUBA.

Everyone who owns a Pas 29 COTI, E COTI or Nivisy's Tacs M will be making a serious mistake IMHO if they do not get a CUBA while they are available now. Best thing since sliced bread IMHO. Turns the COTI into a real working tool for a relatively modest cost compared to the OEM offerings and a far better solution than the OEM offerings.

 

[Glassaholic]

With the supply chains breaking down like they are, now is the time to get anything you have a "need" for.

Who knows when or if certain things will be available, especially a specialty item like the CUBA.

Everyone who owns a Pas 29 COTI, E COTI or Nivisy's Tacs M will be making a serious mistake IMHO if they do not get a CUBA while they are available now. Best thing since sliced bread IMHO. Turns the COTI into a real working tool for a relatively modest cost compared to the OEM offerings and a far better solution than the OEM offerings.

Thanks WNH, and I’d probably expand you comment beyond “need” to just “may need” sadly that is where the Left is try’s NF to push our country right now.

 

[WhereNow&How]

Thanks WNH, and I’d probably expand you comment beyond “need” to just “may need” sadly that is where the Left is try’s NF to push our country right now.

At the rate things are going, "will need" is likely the most accurate descriptor to assign.

 

[Fongman]

I have that made up already and I’m using it now. On one hand, the battery life on the DTNVS makes a remote power supply less useful, on the other, of you have a COTI and run the battery pack, why not run both? This may end up a custom item, not sure they will want to stock it.

Unfortunately, I need a DTNVG version. And from previous info in this thread, the DTNVS thread pitch is different from the DTNVG. If the DTNVG/COTI cable is ever produced - someone just keep me in mind please.

Thanks.

 

[stefan73]

When is the next run? I am interested in one.

 

[wigwamitus]

Ok, we are looking at doing another "run".

I picked off these requests (please confirm by posting below if you are still interested), if anyone else needs any of these please post here ASAP.

We can currently do
COTI, DTNVS, IR Patrol, Skeet-X (same as patrol)
And are finallizing Skeet-L (which is actually a little different from skeet-x) and DTNVG (we expect to be able to include both of those in this run if anyone needs)

COTI	@Kevinski
COTI	@stefan73
COTI	@Glassaholic
DTNVG	@Fongman

 

[WhereNow&How]

While the worldwide supply chain is breaking down and you cannot get a lot of items, parts and food because of lack of availability, the "Wig Supply Chain" continues to deliver.

This is a great thing. Get them while you can folks.

The CUBA is a game changer when it comes to running a COTI or the other devices they are making cables for.

 

[stefan73]

I am still interested.

 

[Glassaholic]

Ok, we are looking at doing another "run".

I picked off these requests (please confirm by posting below if you are still interested), if anyone else needs any of these please post here ASAP.

We can currently do
COTI, DTNVS, IR Patrol, Skeet-X (same as patrol)
And are finallizing Skeet-L (which is actually a little different from skeet-x) and DTNVG (we expect to be able to include both of those in this run if anyone needs)

COTI	@Kevinski
COTI	@stefan73
COTI	@Glassaholic
DTNVG	@Fongman

Yes, I’m in for the COTI

 

[Arevalosocom]

IF this CUBA drops in like I think it does in place of the CR123 in my .......NIVISYS TACS ........I definitely want one

 

[WhereNow&How]

IF this CUBA drops in like I think it does in place of the CR123 in my .......NIVISYS TACS ........I definitely want one

I run the CUBA in one of my NIVISYS TACS. It fits perfectly and runs the unit perfectly.

 

[Arevalosocom]

I run the CUBA in one of my NIVISYS TACS. It fits perfectly and runs the unit perfectly.

Thank you for this info.

I definitely want one then. Please add me to list

 

[Kevinski]

Still interested

 

[CoryT]

5 units are inbound, place your orders and if needed I’ll make up more, I have parts ready

 

[stefan73]

@wigwamitus do you want payment now or when you get them in hand?

 

[wigwamitus]

When the website let's you pay you can pay !

 

[Arevalosocom]

Ordered and paid. Let me know if the other cable option we were discussing is possible. Thanks

 

[CoryT]

Ordered and paid. Let me know if the other cable option we were discussing is possible. Thanks

I missed it somewhere, what cable did you need?

 

[Arevalosocom]

I missed it somewhere, what cable did you need?

Emailed about a possible Lemo end for RNVGs to USB cable estimate

 

[CoryT]

Ahh, yes. We are working on that, all we need is the connector info, waiting on a response from AB.

 

[Bravo6niner]

Talk about excellent customer service, @wigwamitus and @SkyScrapin got a CUBA working for my skeet L over the last couple weeks. They got me a cap that works and fits perfectly. Can’t say enough good things about these guys!!!

 

[WhereNow&How]

Talk about excellent customer service, @wigwamitus and @SkyScrapin got a CUBA working for my skeet L over the last couple weeks. They got me a cap that works and fits perfectly. Can’t say enough good things about these guys!!!

This.

Wig, Sky and Cory can deliver. Great team of guys there.

 

[CoryT]

Glad to know the third time was in fact the charm. Tricky to get the dimensions right without the unit in hand, but it seems we finally got it right.

So, as of now, the COTI’s, TACS, DTNVS, IR Patrols, Skeets all have a USB solution, with the DTNVG final test shipping tomorrow with Lemo and Fischer Y cables in the works.

Anyone have any other requests?

 

[Tyrnek]

A split DTNVS/COTI cable would be awesome, but if that is too much to ask for currently then I'll call dibs on one for a COTI.

 

[CoryT]

A split DTNVS/COTI cable would be awesome, but if that is too much to ask for currently then I'll call dibs on one for a COTI.

That is available now. PM me and we'll work out details.

The COTI cable systems will be handled by SOK, the split cables and other caps will be considered one-off special orders and I'll be handling those directly, at least for now.

 

[wigwamitus]

Yup, SOK will continue to handle the COTI eECOTI and TACAMS plug/cable solutions, for other head mounted plug/cable solutions, head over to coryt's thread

Night Vision - Custom USB power supply options for Thermal and NV

With the success of the COTI USB Battery Adapter (CUBA), we are adding options for other systems. The CUBA distribution will continue to be handled by SOK, and I will deliver the one-off custom solutions for other systems. Currently, we can supply a cap and battery adapter for CR123A systems...

www.snipershide.com