Sidearms & Scatterguns XDM 10mm GTG or NO

Bigwheels

Gunny Sergeant
Full Member
Minuteman
  • Jun 16, 2007
    1,830
    298
    58
    Anacortes WA
    Thinking about getting one primarily for outdoor protection in place of my Ruger SBH 45LC which is getting bigger & heavier every year.
    What do you think? Are they accurate? Is the 5.25" worth it over the 4.5"?
    I think I want the long one but I want night sights. Haven't found any for the 5.25" one.
    Thanks.
     
    Have a 4.5" 9mm and love it, different caliber but same gun, little trigger work yields what I believe is the best striker fired trigger out there
     
    Do you like the sights? I'm so used to my Tritium Novak's on my 1911 that I don't think I'll like the featureless rear sight on the 5.25" that I want.
    Have you chrony'd it?

    I've shot the 5.25" 9mm in 3 gun for years with the stock sights. So, when I got the 10mm they were what I was used to and work well for me.
     
    My local gun store has 1 of each on the way & my name is on 1 of them.
    Probably going to go with the 4.5" since I don't like the open cutout in the slide nor the inability of changing the rear sight. Don't understand why they would even make a "target" 10mm like that. I want a ultra reliable high capacity power house defense handgun for woods, home & personal defense.
     
    I'm now waiting for the f'ing "waiting period" that was illegally passed by that damned initiative a while back.
    Got a 4.5" & ordered an Alien Gear iwb holster & twin mag holster for everyday carry. And have a box of each Underwood 180gr GD jhp, 180gr xtp, & 220gr hard cast on the way for testing.
    Now I want some night sights & need to decide on a chest, or tactical holster for the wilderness. Thinking about the Kenai chest holster. Just need to figure out how to keep it free from my binos & backpack.
    Any wisdom about this setup?
     
    I've only shot about 20rnds through it so far to chronograph the 3 Underwood loads I got to try. Seems to be a bit slower than advertised. The 180gr was at 1225, 200gr at 1175, & the 220 was at 1150fps. Sights were zeroed well & have had no malfunctions of any kind.
    The only gripes I have is it launches brass out of sight, & the ones I recovered had a little dent in the side.
    Maybe a stiffer mainspring?
    I have 3 more mags, a mag loader, more ammo, & Trijicon HD sights with a sight press on the way.
    My Alien gear iwb holster arrived today & I spent some time adjusting & trying it out. 1st impressions are just ok. The mag holders are just massive! Not impressed with those at all. May send it back for a refund & keep looking for something better.
     
    Got the Trijicon HD orange in &used my new Amazon sight press to install them. Only problem was getting the stock ones out of the slide. They were a pita but once they cracked it went fairly easy. Have the new ones installed back to where I marked them before removal. Assuming that everything went back where the original. Just need to verify the poa/poi.
    The Alien Gear iwb holster is really comfortable but the magazine holders are way too beefy. Their setup to carry iwb each 1 is about 11/2" thick. Now I've tried them in their & they're just too fat.
     
    Last edited:
    Verified the sights yesterday. Didn't need to touch them. POI is now at the point of the dot on the front sight just like the Novak's I have on my 1911. Ran about 50 rnds through it & still no issues of any kind. I didn't think I'd really like a plastic gun but I'm really beginning to love this XDM.
     
    You must be at least 18 years of age to use this site
    You confirm that you are at least 18 years of age by continuing to use the site.