RRS 22i Compact, legs were wrapped up right away and only used a handful of
times.
$825 shipped (buyer pays insurance if you want it)

Payment PayPal FF or you pay the fees for G&S

PM if interested

I have two Remington model 7 wood stocks, one is checkered one is not. They've never been on a barreled action. They'll come as is in the pictures. Remington recoil pads. Spray finished. Asking 350 each OBO.

I have a few left hand bell and Carlson sporter stocks to get rid of. Remington contour barrel inlet bdl bottom metal inlet, tan with black web. Asking 150 obo
2 LA LH
1 SA LH

Hey guys, looking to sell this Model Seven action and bottom metal mag box follower and spring to someone. I had been planning on building a rifle on it. LRI blueprinted the action pinned the lug and blew the rear guard screw out to 1/4-28 for me. They also trued the bolt opened the bolt face to .473 and installed the M16 extractor. Asking $1000obo for everything in the pictures… besides the rug shipped to your FFL. My loss is your gain. Pretty motivated to sell so make an offer.

For 1300 I’ll throw in the wood stock I got for it.

Looking for some ideas. No camo, no garage paint jobs

Found. Thanks @poke_53 !!

Selling my Vortex AMG in MOA. I would describe it as good condition and the lenses are pristine. It shows signs of typical wear (faint ring marks, etc) but it did just get back from Vortex HQ for a deep cleaning. Comes with everything that came in the original box except for the Objective flip cap. Not a clue where that thing went.

$1500 TYD

So this is the best thing since the V3 Auto Trickler. I marked 700 rounds while talking on the phone and watching tv. I've since hooked it up to my Dillon 55B, and it works great. Having my brass marked as it ejects from the press is a joy.

For sale: Weatherby MarkV 270 magnum in a walnut stock with an older Burris scope.
$2000

Bought this awhile back and never shot it. Don't remember the round count but it wasn't very many at all. $100 shipped

Changing scopes around, mounted never shot. T3 dark earth 5-25 spuhr not included. original box included.$sold


Atacr nightforce 7-35 tremor 3 dark earth. rapi mount NOT included. no box.

$3250 shipped. Back up for sale, fell through.

Glass perfect on both

Looking for one in working order.

Selling what’s in picture. Chip tray no machine and jig
All for $2500 plus shipping

Brand New In Box Geissele SSA-E Trigger. $170 Shipped in CONUS.

• Two Stage for AR15 AR10
• It uses a standard .154” trigger and hammer pin so it will fit in any Mil-Spec stripped lower receiver.
• Designed after the same trigger used by U.S. Special Forces
• Smooth two stage 3.5 lb. trigger pull

Ive been hearing about new reticles for this optic for a minute. Is anything materializing?

New in box MDT HNT26. Rem 700 short action (and clones), fixed stock, Arca rail.
$1100 shipped. Only trade interest would be a precision 22lr bolt gun.
Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

part # 05-960

Both were installed in a lower but never taken out of the safe. Like new condition and unfired..

$190 each shipped to lower 48 UPS ground

Finally, getting around to watching the movie Reagan that came out last year.

Well, it’s a little bit campy. It’s actually really well done and worth watching.

A lot of it comes from the biography Dutch. Which was an adequate book.

It is absolutely worth watching. And definitely kind of a feel good movie for those of us who grew up revering Reagan and morning in America.

For those who want to see a great biography, before our American experience documentary from PBS is actually superb. And free on Amazon prime. Unfortunately not on YouTube anymore.

But the movie is well worth watching!!

Sirhr

Howdy Hide,

I'm sure I"m not the first to step on their soapbox here about this topic (nor will I be the last). I also know many folks that participate here are either employed or have been employed in one way or another with the DOJ industry. It's not my intention to cast stones towards those folks (as far as I know I've always avoided the "uniform hanger" and whatever terminology typically found in these type of threads). That said- as the thread title suggests I'm beyond weary of what I see it do to folks that (I at least) perceive to be otherwise normal individuals/citizens/Americans/whatever and just have their lives completely upended once they find themselves sucked into the gravity that is the DOJ 'system'.

I've seen so many examples over the years, as I'm sure many here have, with things like say divorces. An otherwise upstanding guy making the mistake of marrying someone who (for so many reasons that it could be a discussion itself) find themselves in a bitter court battle draining their finances that they spent years/decades often building because their wife got 'bored'/whatever and then have to spend 10's of thousands of dollars in legal fees, lose their house, lose their kids, lose their retirements & lifesavings, and also careers and reputation at the otherwise whim of someone that they trusted and spent all those years supporting.

Another example I've seen firsthand that isn't often discussed is DUI charges. Folks getting their pictures in the news and lengthy proceedings & expenses to challenge the charge afterwards and even if they "win" as not being guilty of the charges, they're out significant money/have fallout for their reputations, lose significant time, etc. It may vary by state but I even know of folks arrested, publicized, and were brought in for some additional testing (typically blood testing in these parts) and come back completely sober as in no alcohol, drugs, etc in their system at all. And the DA just says 'eh' we'll dismiss the charges (which were brought up likely months previously).

And one might think that's a "one off" type of situation but again, it may be regional, but there was an investigation here a few years ago on the frequency of folks being arrested and brought in for further testing after failing whatever roadside test (BAC/roadside sobriety) and it was found that something like 25% never were brought to trial because the testing confirmed that they had no alcohol/drugs in their system and it was a 'mistake'. I could continue on my opinions with that alone but that's not what's driving this post/what makes it relevant here.

I'm often criticized for posting longwinded blocks of text so I'll do a quick <break> and continue in another posting.

-LD

This is primarily some observations about the Timney HIT triggers for the remington 700 series of actions and/or clones.

I normally run Bix N Andy Tacsport pros, but outfitting every single rifle with those and backups can get pretty pricey pretty fast. I happened to see EU had them for an INSANELY low price last year, so I picked up 3 of them.


Rifle setup is as follows:

Left Hand impact 737 action in 308
Timney HIT 8 oz trigger
various chassis to include: Vision Pro, Manners MCS-PRS-TCS, ACC Chassis
308 ammo specs: Peterson Brass, Varget, Sierra 177 SMK-CN at 2600 FPS


I received the Timney HIT triggers from EU, and installed one in my tac class rig. Trigger felt exceptionally good on dryfire, and I hit the buttstock on the ground to make sure it was drop safe.

After installation, I put approximately 200 rounds down the gun, no issues. After this practice session I threw the rifle back into the safe. Few weeks later, took it out to make sure everything was good, went to the range, and first 10-15 rounds were fine. After that, I ran the bolt, and nothing. Trigger was completely dead. I went to lift the bolt and the gun went off. Somehow the sear engagement was messed up. ended the range session, went home, and disassembled the gun. The trigger's pins that were holding the internals together had completely egged out, or I didn't notice they were out of spec on installation. The trigger basically fell apart.

I contacted Timney support and they were helpful, although with an air of not believing me. I had a new trigger and RMA from them in about 24 hours, delivered 2 days later which was cool. Installed the new trigger, everything seemed fine and to spec.

Ran a 1 day match with it, no issues, threw it in the safe after cleaning the rifle (I didn't clean the trigger here).

two weeks before the box canyon suppressor match, pull the rifle out, put about 100 rounds down it. I'm sitting at ow about 300 rounds on the new trigger sent to me. I get to box canyon, sight in, and run the gun. Day 2 on the last stage, trigger completely dies again. Dead, cant manipulate it, doesn't hold the firing pin cocked, nada. I look up cleaning instructions and do what Timney recommends. It brings it back to life.

After this, I put another 200-300 rounds on the gun, everything seems fine. PRS skills stage at the most recent match, it completely dies on me when I close the bolt. Nothing. Nada. I knew this was a dangerous situation so I make sure I have a good berm behind my target, and lift the bolt. Firing pin goes forward and that's it. I get a stage DQ (rightfully so) for an equipment malfunction. Take the trigger out, throw a new timney HIT in I had as a spare, and finish out the day.

What I want to know is this:

Has anyone else had these issues with Timney HITS in impacts or other guns with trigger hangers? Both my smith and a buddy who I shoot PRS with run Timney hits, in impacts, and never have seen this. I've basically now gone through 3 triggers and had serious malfunctions. I got these triggers from Eurooptic had a crazy good sale on them but i'm tempted to ditch them and sell them cheap to avoid any of this nonsense anymore.

The rifle is a Bergara b14 hunter, I used it hunting for many years, it took rain, fog, snow amd blizzards. After an hunt in rough weather i always cleaned the bore but I have to admit i never babied it. Since I go hunting at least 30 times per year and i take one animal more or less everytime, sometimes hunting 3 times a week during autumn and winter, of course it was impossible to clean the bore to bare metal everytime i shot. I preferred to keep accuracy and POI consistent keeping the barrel fouled. I stored it always in a humidity controlled room. There is absolutely no surface rust, even where the finish of the rifle went totally off for rubbing against the backpack or against my body. It has shot more or less 500 .308 win factory rounds and it is still very accurate, shooting easily 0.3 MOA with a couple factory loads.

After all these years i decided to clean the bore to bare metal since this rifle is going to retire for a while and it will be used only occasionally from now on.

I found this spot with what looks like pitting/corrosion more or less 15 inches from the chamber (it is a 22 inch barrel). There are a few other spots looking like this but smaller than this one in the same area of the bore. The rifling looks good in the rest of the bore and it wasn't difficult at all to clean all the fouling and copper.

I am not worried about this because the rifle shoots very well and this spots are not located in the most critical portion of the bore but i am curious about what could have caused this. It is a button rifled barrel and it was the first time i borescoped it.

Thanks for the input guys!

Selling a RAL8000 Schmidt & Bender PMII 5-25x56 with MTC LT turrets and H59 reticle. The scope is in great condition with a few minor cosmetic blems on the scope body finish from normal use. Comes as shown with factory box.

SOLD

No trades please.

RimX Proof Research 20” comp contour barrel. 1:16 twist. 50 rounds. Shot SK standard 1 ragged hole.

$415 shipped

PP FF/Venmo

Prometheus Powder Measure with custom corian base and adjustable leveling feet. Also has 22, 243, 264, 284 and 338 brass funnel nozzles as well as Brand’s fine powder trickler that can be used with 8208 type powders. $5,000 F&F or cash face to face. I can ship, but would prefer face to face transaction if possible. I’m in eastern Ohio, but travel extensively throughout the Midwest and the East Coast. PM if interested, don’t reply in this tread - thanks