The MP320 CALX kit is compatible with any non-manual safety P320 FCU and slide assembly and includes a polymer lower, a specialized brace, an alloy upper assembly, a 30rd magazine and a ROMEO5X red dot optic.

There were only 800 units manufactured! This auction is for one of them. Please see photographs. This is not a firearm and does not have to be shipped to a licensed FFL dealer.

I have minimal rounds through this (<100) and shows no sign of use.

I also have an P320 that I would sell with this for an additional cost. Reach out if interested, and know it would go through an FFL.

$900 OBO for the MP320 kit only (as shown in pics).

Looking to see if someone has an extra McMaster & Carr spring they would like to sell.

Looking to re home this Thermal clip on that has not been used or fielded. Unit has been mounted turned on and function checked less than 5 times… Never shot under. Still around 8 years of Warranty if ever needed. Wanting other higher end items of interest/need. Ideally would like to trade plus or minus cash for POT Voodoo-M or S, High spec WP RPNVG, RNVG-A, BNVD 1531s, AI ATX-C, AXSR, 13.5k Trade value or 12.5K net to me and I’ll Split ship/Insurance….

I slung up my AT and was heading up the stairs when the QD swivel detached and the rifle slid off my shoulder....oh joy.

Puzzled I engaged it again and gave it a tug only to have it come out again.

I figured I could have an out of spec swivel so I grabbed another (I only buy USA made swivels) and it does the same damn thing. It happens with the sockets on both sides of the chassis towards the muzzle, however, the otheer sockets on this rifle and my other AT are all fine. I tested at least half a dozen QD swivels with the same results.

I've always hated QD sockets and this is why. This type of thing didn't happen with HK style swivels of the AE/AW series.

I guess I'll see if MHSA or AINA can get me replacements, however, I'm not sure how that'll go.

Like new Peak01 iron sights from Scalarworks

$200 shipped

Foundation Centurion cut for Defiance short actions. Color is dark distressed and is cut for Hawkins DBM M5 bottom metal. Package includes: stock, Hawkins DMB M5 bottom metal, Gray Ops bag stop, 22 piece brass weight set, 22 piece lead weight set, L3I DINA weight (installed), spare arca and anschutz rail with hardware. Cross posted on ARFCOM and Tacswap. Can send more detailed photos.

Up for sale is a 20” proof CF 6GT barrel threaded 5/8-24 has about 400 rounds on it can include 200 Berger 108 elite hunters

Asking 600 shipped PP FF or GS buyer covers fees

T3 Sporter in .223 for sale. It has about 1300 round thru it. I have load data available and around 300 pieces of Lapua .223 brass fired twice I will throw in. Scope and bipod not included. $1050 shipped in the lower 48.

Crafted from foam-filled carbon fiber, the MDT CRBN Rifle Stock is both incredibly lightweight and durable. https://mdttac.com/mdt-crbn-rifle-stock/

$300

SH-4 4-16x50 Gen 2 (Mil):

• • SKU: #SH4GII-4161VPR
  • Unit of Measure / Reticle: MIL / VPR
  • Condition: New in box, never mounted

Halo Scope Rings:

• • SKU: #AHSR-34Med
  • Tube Diameter and Height: 34mm - 1.26 Medium
  • Condition: New in box

Buyer pays shipping, or in-person pickup in east Bay Area, Ca.

No more pedo parades in Hungary

I have a barrel i bought and probably not going to use for a while. 24" carbon fiber wrapped proof Rem varmint profile, spun by Straight jacket armory in 6.5 Creed. Barrel has 150 rounds or less. $600 shipped
Will post pics later.

Been a while since I have found something to put into my collection, but yesterday I picked this Swedish M41 with an AGA44 scope. The AGA 44 was one of 2 scopes used on M41 snipers during WW2 as a replacement for what was originally to be on the rifle, the Ajack 4x42.
From what I have read so far only about 500 of the rifles where equipped with the AGA44 scope making it one rare bird.

Overwatch precision gen 1-4 Glock trigger parts. All descriptions listed on boxes. Trigger spring is 6lbs. Ended up getting rid of most of my gen 4 Glocks. Not looking to part out.

45 shipped conus

Ok, so I'm a new precision shooter. I've been doing USPSA and 2-gun for some time, but now I'm getting involved in NRL Hunter and PRS. I'm on an inevitable budget (I still can't figure out how people who make less money than me - and no, I'm not rich - can afford those sexy rifles and crazy expensive reloading tools; yes, I'm looking at you AMP Mk. 2 machines). So being the nerd I am, I've started doing homework and putting together a list. Before I lay it out, hoping for feedback (negative is just as, if not more, important than positive), I want to share objectives. I say this, because there is no way I'm going to be reloading 9mm. For USPSA / 2-Gun, gimme my cheap blazer 124 gr all day long. It is easy and I don't need anything more accurate. So, here we go.

Objective:
I'd like to reload top quality NRL Hunter (6.5cm) and PRS (undecided - for the time being I'm using the same rifle for both - and I'll give it to the end of the season [2025] to determine whether I'm doing 6 dasher or whatever the new sexiness is) cartridges. I'd like single digit SD (preferably sub-8) based on a 10-shot string.

Caveats:
My wife is the love of my life. Because of that, I'd like to minimize the expense. She accepts my hobbies, but I don't want to add stressors to our otherwise beatific relationship. So consider me poor.

Conditions:
Because I have a full time job, three kids, a wonderful wife, 2-gun and USPSA hobbies, I'm not going to be shooting a ridiculously large amount of ammo in an NRL Hunter or PRS context. Hell, I do a lot more positional dry firing at home (build this awesome shooting tree leveraged with a DFAT on my scope). So I have zero problems taking more time to make ammo (for now) as long as the end result is top notch.

Ok, so here is my list. This is from someone who is a total newb and spent too much time trying to figure out exactly what I needed to make great ammo without ever having made ammo. So criticize freely.


Anwyay folks, I'm not sure what I'm missing and what I could swap for something better on the same budget. Right now, list price is ~$1858 (ok, that's not roughly, that's exact), but there is a fair amount I could get 2nd hand and save a bundle.

Please let me know what y'all think and any advice is good advice.

TLDR: I want awesome ammo and want to make it cheap, will compromise on how much time I put in to it (ie I'll put in extra time to save a few hundred / thousand over all)

Cheers!

P.S. I love being able to copy and paste from a spreadsheet into here!

Does anyone know who makes a barrel in 6mm creedmoor that would fit the POF Revolution?

I have a revolution in 6.5 Creedmoor which has good to me, averaging 1 moa with Hornady 140eld, but my barrel is about shot out. Ideally want to tighten the accuracy with a better barrel and use it for competitions.

Has anyone swapped their barrels on the Revolution or POF Rogue without sending it in?

Very Lightly Used Sig Sauer Cross Rifle in 6.5 Creedmoor 18 Inch Threaded Barrl in the First Lite Cipher Camo Finish .....Comes in the Factory Box with Lock but seem to have misplace the Paperwork/Owners Man. ..... 1 - 5rd Pmag Folding Stock ...Gun Has Less than 100rds Fired and is a solid .75 MOA Gun with The Standard load of 4350 and 140 eld.........SPF Shipped My FFL to Yours ........

Winkler Wild Bill Tomahawk New in box with green Micarta full length handle.

$480 shipped in lower 48 states.

I put this together a while back to keep in my range bag as a cheat sheet but I made a couple of changes to it so I thought I'd share it with you all, some may find it useful. The theory is that it can help a shooter with a basic carbine make accurate sight corrections, set up a fairly accurate ballistic profile if you don't know the exact velocity, help analyze shot groups, help estimate and compensate for wind, range estimate, and do a little bit of maintenance if something comes loose or you're moving stuff around. I taped mine up with packing tape, folded in to 1/4's and slipped it into a pocket on my range bag.

"Front"

"Back"




Cheers folks!

Going through brass from many trips to the range and came across these pieces of 308 LC match. What rifle does this and reason behind it. Never seen it before till this evening. Just curious and if anyone knows I would like to know.

I got these MBX mags when I purchased a used MPA DS9.
I have five (5) of them. They are non-lock back magazines, and I don't have any use for them. They are like new.

I'd do $100/each shipped
If you buy all five, I'd do $475 shipped for all of them.
I prefer Zelle, would accept PayPal F&F or USPS money order.
Cross posted and for sale locally (Pittsburgh PA area)

No trades at this time.
Not shipping to any state with magazine restrictions.

Thanks
R

Have an original JAE 700 chassis and looking for the best way to protect my magazine from getting jammed againt shooting bag causing misfeeds, they make a barricade stop but for the newer version JAE chassis from MDT, but nothing for the original ones. Any help or suggestions would be appreciated. Thanks

Short Action Customs 223 REM sizing die, includes the following:

SOLD

RCBS Matchmaster competition seating die

SOLD

manners eh1-a short action, bedded for an impact and proof sendaro
Grayboe bottom metal
Atlas pic rail up front
Also sending studs to run a full arca rail on bottom
$1000 shipped

Hi everyone,



So I really hate the colors of my Savage Axis II. The color scheme doesn't match anything around me. Instead of Grey and Black we have more Green, Brown and Dark Green being in Tennessee.

So I decided to paint it. This was my first time painting anything like this. Let me know what you think.