I guess it's easier to just start an "Umbrella Topic Thread" and keep it all condensed in one place

Merry Christmas Everyone,

It's the 12 days of Christmas and I want to do an Ugly Outfit Contest as new Gravity Ballistics Shirts just showed up.
I am going to give away, at least 12 shirts, one a day until Christmas.

Post your ugliest Christmas outfit, what did MOM make you wear or what did the Kids buy your for Christmas that was less than ideal ?

I'll pick winners and mail out T Shirts ...

I have been a loyal long time customer of Surgeon.. Just a heads up to the community. Surgeon is no longer selling actions to the public again. Sad to see them go!

MDT Original CKYE-Pod Arca standard length $450 NIB
Old stock never used with updated tentioner.

AR 15 Reloading
Shooting factory ammo no problem.
Wanted to try handloads
Tried 69 gr Sierra reloads and all fired and fed well. Approx 20 rounds
(been reloading > 20 years, rifle bench rest, and pistol)
Used reloaded PMC cases
FL resizing. Measured shoulder diameter and base. Diameters of resized brass match unfired brass. Shoulder set back is 2 Thou. Cases trimmed and annealed.
Use Small base Bushing RL die
OAL as per reloading manual for given bullets
Tried Hornady E tips and another bullet, and they fed into the chamber, BCG in battery, and none of the primers had even a dent. The trigger fired each time....Click
Came home and before I cleaned and lubed the rifle and BCG.
Tried 3 empty cases with primers , no bullet , or powder!, and all fired .
Thus the rifle feeds, firing pin is OK, Trigger group works, BCG is in battery....
What could have been my problem?

Thank you in advance for the assistance

Selling my brand new MDT field stock chassis for Savage LA CIP 3.850 and comes with (1) 5 round MDT AICS mag.

Stock is brand new and never used.

$275 shipped for both chassis and AICS mag shipped lower 48

Any good tricks to tune magazines for the 6 GT? Rifle has a master piece arms chassis and has some feeding issues.
Thoughts?

Used these on one trip to Antarctica in late 2022. Great glass for the money. $735 shipped. PP F&F.

Built last year as my main coyote rig, shoots absolutely amazing with factory Hornady 87gr vmax and hammers coyotes. Also shoots heavier 108gr ELDM really well, stretched it out to 1000y no problem. Rifle has 380-400 rounds through it (not sure where I am on the last box) only ever shot Hornady factory ammo, have brass to sell with it if you’re interested.

Parts list:
Aero m5 receiver set
M5 handguard
BSF 18” 1/7.5 carbon barrel
Superlative adjustable gas block
KAK enhanced BCG
Gieselle ssae trigger
Magpul prs lite stock
Radian raptor SD charging handle
SOLGW Parts kit
$2200 OBO

Will upload better pictures tomorrow

Gentleman, today I have something "special" for you. I am presenting you with an opportunity to join the latest and greatest internet controversy. I am selling my RAL8000 TommyBuilt T7 and a whole package of goodies with it. This gun has spent the majority of its time under my ownership going back and forth to TommyBuilt, and I estimate that it has around 600rds through it from myself and the folks at TB. During its last trip home, the gas system and BCG were rebuilt with the latest iteration of parts and tuned in order to ensure "reliable" cycling. After receiving the pistol back I fired 50rds suppressed and 50rds unsuppressed with 0 malfunctions and proper bolt hold open on each magazine. That being said, I cannot make any guarantees about the future performance of this weapon system. I can however guarantee that it will continue to look extremely cool.

Included with the T7 Pistol are:

• Custom TommyBuilt Tactical Pelican Case
• 4x HK German made 30rd magazines
• RAL8000 Cerakoted MP7 Stock with an HK backplate/stock adapter
• TommyBuilt MP7 style foregrip in RAL8000
• SureFire MP7 Muzzle Device with shims
• 450rds of Fiocchi Range Dynamics 4.6x30mm
• TBT Patch and various T7 stickers

I am asking $6200 for this package. Shipping + Insurance is included. Pistol and goodies shipped separately. Payment method is open. Only thing I won't take is Venmo.

If you are located in the fine state of Texas, the B&T MP7 Suppressor is also available. The locking collar on it has been serviced by B&T, and the suppressor has 50rds through it. $6700 for the package including the suppressor.

I’m selling a like new set of 34 mm low ARC M-brace scope rings. Never taken in the field, no scratches or imperfections and no loctite applied. $150 shipped

You tell me the pros and cons. Want to build .300WSM
Some influencers would be cost and weight
I have a 6.5 PRC built on a TL3.

Selling my Burris XTRIII 3-18x50 with scr2 mil reticle. Comes with Warne mountain tech low rings. Scope is in overall good condition, does have one mark on the objective from laying it on a bench that scratches it which you can see in the pics. Also comes with the lens covers, box, and sunshade.

Asking $900 tyd

Looking for the amp code for 6.5x47 alpha brass (lot 01A230717D6). I have the old non-aztec amp. non-neck turned brass. I emailed AMP and havent heard back.

Hey everyone, (admin move this thread if needed)

Wyatt Barber here with an exciting update from MullerWorks Barrels. We've been working hard behind the scenes, and I'm thrilled to announce that we've reduced our lead times to just three to four weeks!

Whether you're looking for rimfire or centerfire barrels. We offer both cut-rifled and button-rifled options, all crafted to the highest standards. Custom barrels made to order and proven by some of the best shooters around.

Thank you to everyone that has waited for our barrels in the past and now are in a position where you won't have to wait long!

If you have questions or want to talk about possibly getting something in the works, email me ([email protected])

Regards
Wyatt Barber
MullerWorks Manufacturing

Wondering from those who run a chest rig for their AR’s, either 5.56 or 7.62, what do you wear and what do you carry with it?

I’m just getting back into rifle shooting after some time away and am putting together a chest rig for my general purpose 5.56 AR currently. I was looking for something low profile and not a lot of weight.

I went with the ATS Tactical Gear Low Profile 5.56 Chest Harness. I was fortunate to find one new from someone for $85, they’re priced at $129.99 on ATS’ website. Plan on using it for training courses and to carry ammo, range finder, and maybe a few other light items while hunting hogs and coyotes. If I like this rig, I’ll consider ATS’ 7.62 version to support my other rifle.

Look forward to hearing and seeing what you use and carry.

Brand new in the box: Precision Armament Hypertap muzzle brake. Matte black. Standard body. 6.5 with 5/8x24 threads. $150

For the Ohio Poacher!

Simple question, cause I see so many and wonder what the story is. What does your screen name mean.

Mine is simple, it is my nickname throughout a lot of my life. My last name is Cogburn, and I grew up in Arkansas really close to Ft. Smith and Judge Parker’s court. The 98 is the year I joined Uncle Sugars chain gang

For your consideration, catch and release- M16A4 clone - semi auto
Add a rear sight and ACOG to complete - for easy hits to 600 meters and beyond
Pleasure to shoot - round count is 75 rounds, all match 69 grain. Hitting 12” steel at 600 was cake

Anderson lower:
- mil spec trigger
- A2 grip
- A2 buffer and stock with trap door storage and mil cleaning kit

PSA factory upper:
- correct handguard
- PSA 1:7 20” 5.56 barrel with A2 flash hider

BCG included
Butt stock mag holder vertical grip are included
Sling not included

$1050 entire rifle
$700 URG only
Prices are shipped, insured

Venmo, Zelle, money order
No trades funding another project

Thanks for looking

Remington PSS, Leupold MK4 4.5-14x50 with Vortex low rings. 1/4" M1 knobs, TMR reticle, not illuminated, appear to be a 20moa rail.. You can look up the serial number if you like, it's in a picture below.
Only selling as a complete package, fairly priced for a good deal. Tired of "living my youth" clearing out certain things.

Captured pertinate pictures to show condition, obvious has some wear externally and on the bolt. Bore is fine and the crown, light shinning from action on crown pics. Honest 5 shot .75, of course I've squeeked a couple smaller with FGMM/168. I got this used, unknown true round count but no issues with it, all original as I can tell. No issue with the scope, tracks, repeats, etc. If you don't know, the rifle has a 26" barrel, .308 1n12 twist.

me to FFL(copy of ID will accompany)
USPS money orders/check with hold--no PAYPAL, Etc.
1550 open to offers--get it done.

I sold my Bergara B-14 Hunter. It currently has an MDT HNT-26 on it but the guy I sold it to also wants the original stock. I found the floor plate but I can't find the damn action screws. Can anyone help me find some? Also, can I just use some Remington ones and cut them if they don't fit? I assume if that's the case then these from this link will work?

Looking for a lightweight 243 6 6.5 for my daughter. Prefer custom. Carbon proof barrel and a shorty.

Let me know what ya got in pm’s please.