Brand new 3eir Vulcan for Surefire 300/600. This thing actually kinda fucks, will get you out to 5-600yds. I just want more umph…

$315 shipped. Zelle/venmo

Zelle, Discreet paypal gift, cashier's check

Excellent condition Schmidt & Bender 1-8x24 CC Short Dot
30mm tube
CCW 0.1 Mil turrets
RAL 8000
Second Focal Plane (not "Dual CC")
CQB2 reticle
Tenebraex lens caps


$2500 shipped UPS Ground CONUS

Nightforce SOCOM Clone Kits – Brand New, Never Opened

Selling two limited-edition Nightforce SOCOM Clone Kits, still sealed in their original Pelican cases.

1-8x24 ATACR S-VPS SOCOM Clone Kit​

• Kit #290 of 300
• MSRP: $4,535
• Price: $3,500
• Link for details: https://www.nightforceoptics.com/riflescopes/limited-run/1-8x24mm-f1-s-vps-kit

7-35x56 ATACR P-VPS SOCOM Clone Kit​

• Kit #280 of 300
• MSRP: $5,890
• Price: $4,800
• Link for details: https://www.nightforceoptics.com/riflescopes/limited-run/7-35x56mm-f1-p-vps-kit

If someone wants both, I’ll knock the price down to $7,750 for the set.

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned. Go read the site rules before posting again.

Had Jay build this set about a year or so ago and they are absolutely spectacular. RPO optics, tubes are blem free and the specs are below. Testing the waters on these and can send photos of the spec sheets for serious buyers. Unit is in 99% condition, no scratches or external blemishes. Comes with (2x) Matbock Tarsier Eclipse. 9999$ Shipped and Insured. If interested a helmet set up/LA5B or peq15 can be bundled as well. Only trade would be a set of 31A (green phos is okay but will require cash on your side)


PC 2057/2176
EBI 0.8/0.8
LG 67794/61633
SN 35.7/36
Res 72/72
HALO 0.7/0.7

I have 3,000 rounds of 6mm ARC 108 Ammo Available

I specifically bought in large batches so i have the same lot numbers. All are in 200 round boxes.

I would like to sell in a large quantities and keep lots, together.

1,000 Rounds Same Lot $1300 shipped

1,000 Rounds Same Lot $1300 shipped

400 rounds same lot $500 shipped

400 rounds same lot $500 shipped

200 rounds same lot $275 shipped


open to offers

I have a .308 Winchester 16” barrel with a 1:10 twist. Bolt Action Mossburg Scout.
I would like to use the Hornady SubX projectiles in either 175 or 190 grains. Are those viable or should I go heavier in weight? Would like to use Tight Group and Federal Large Rifle caps. Do any of y’all have any thoughts? I can read the printed load data but just not sure on which bullet weight to start with in a 16” barrel. Load data was created with a 24” . Looking to load subsonic.

And so it starts……
DOGE investigators got doxxed. Calling for public executions on Reddit Lies..

Login to view embedded media

1 new 10 rd
1 like new rd
6br 10 round mags
$105 shipped
PayPal friends

Tested the 190 A Tip today from 530 to a bit over 2000.
Ran some 190 hybrids and 185RDF’s as well for comparison.
Pretty decent wind as I was holding up to 3 mills today.

All three were running a safe 2850 to 2865

the RDF did pretty Good considering the price but the bullet consistency was not in the same league as the hybrid and ATip.
24 mils to 2020 at 2865 and the advertised BC is really close.


190 Hybrids were the slowest at 2850 but still a full mil less come up than the RDF.
The new hybrid is an excellent bullet.
23 mils to 2020 and once again trueing was easy as the BC is really close.

The new 190 A-tip’s stupendous BC had me doubtful as I generally have to fiddle with Hornandy BC’s consistently.
Slapped the speed and BC in the kestrel and it was basically spot on at 530, 1115, 1365, 1930 and only .3 low at 2020!
That could easily be wind related as wind was switchy all day.
Running at a leisurely 2866 it only took 21.4 to 2020.
I put 6 in a row in a 3’ painted circle with at least one hitting the gong in the middle with the A Tips holding 3 mils for wind.
That amazing BC appears legit!

DT SRSA2 Rifle Chassis w/ Monopod, RH FDE/FDE | DTA-SRS-CH-SR-FF $3,749.00
Please call 916-670-1103 to order

Right Hand FDE on FDE with monopod.

The Desert Tech SRS A2 Chassis The A2 chassis system features the same ergonomic bullpup design as the A1 but with features designed to make the SRS A2 chassis system more accurate, lightweight, and reliable. The SRS A2 chassis will be available in the more compact SRS A2 model as well for additional maneuverability and weight reduction.

Accuracy & Stability Upgrades​

The SRS A2 Chassis will feature Desert Tech’s new A2 trigger designed to make the trigger system less complex while providing a trigger pull that has less creep, a shorter reset, and a crisper break. The A2 trigger can be adjusted from 1.5 to 7 lbs. and has a flat contour for improved ergonomics. Desert Tech also upgraded the barrel clamping system in the A2 chassis, the new system reduces stress placed on the barrel when installed. During testing by Desert Tech it was found that the new system’s average accuracy was 36% better than the A1 system. The A2 chassis also now features an integral tripod attachment point and a Harris bipod mount for increased stability.

Weight Reduction & Functionality Upgrades​

One of Desert Tech’s goals when developing the SRS A2 Chassis was to reduce the overall weight of the rifle, making it a more maneuverable and effective combat weapon. Desert Tech was able to cut a good deal of weight from the chassis by fluting the receiver and removing the monopod. The new system substitutes the Picatinny rail handguard for more a lightweight m-lock handguard. The receiver in the A2 chassis features additional clearance allowing for smoother bolt manipulation.

Features of the Desert Tech SRS A2 Chassis​

• M-lock Handguard with Harris Bipod Mount
• Field Match Flat Trigger (1.5 – 7 lbs.)
• Integral Tripod Mount
• Adjustable Length of Pull and Cheek Height
• Fast and Easy Caliber Change
• Comfortable Shooting From All Positions
• 2.1 lbs. Lighter than SRS A1 (including conversion kit)
• 1/2 MOA Guarantee

Desert Tech MDRx FDE FE Rifle Chassis in stock $1,449.99

*Conversion kits additional*
.308 and 6.5CM Conversion kit available

The MDRx FDE Chassis features upgrades to the chassis' construction and trigger assembly. The MDRx chassis has been upgraded with a polymer resin that is more resistant to high impacts and the gas block drainage has been improved so that the rifle functions more reliability in wet or muddy conditions. The trigger in the MDRx Chassis has been improved so that it has a lighter pull weight and less creep resulting in better overall accuracy. Desert Tech MDRx Forward Ejection (FE) Chassis are only compatible with MDRx Forward Ejection Conversion Kits.





California compliant option also available below:

Attempted to buy a Bergara premiere bolt today. I had some gut feelings after seeing they’ve been inactive for about two years but decided to purchase anyway. Seller asked that I pay f&f. I paid goods and services and paid extra for the fees and expedited shipping. After they received payment, they seemed upset that I paid g&s and have since stopped replying to messages and did not ship today as agreed upon.

Just seeing if anyone knows this user or has had transactions or if I’m being over paranoid.

Thanks. Also if you are legit and have a Bergara 6.5 premier bolt, let me know.

I have noticed my impacts are progressively right the further I go back.

Could this specifically be the barrel twist?

If this is true; can I adjust the ballistic program to account for this?

Worst case scenario adjust the windage in the program?

Anybody else experience this?

Thanks in advance.

Note: CZ 455 .22, SK Match, 986fps

Hey guys,

I’m looking to build my first custom PRS rifle and open to advice.

the first and biggest thing on my list is finding a gunsmith to put it all together. I have no experience with any gunsmiths in Canada and looking for some advice. Does anyone have any experience with any gunsmiths in Canada you would trust to put together a precision rifle? Preferably one in Ontario but willing to deal with someone out of province.

I’ve been thinking about getting it chambered in 6.5 creedmore but open to suggestions. and parts that I’m interested in using for the rifle would be, a deviant defiance or deviant defiance tactical action, a proof research carbon fibre barrel, a trigger tech diamond 2 stage trigger. I don’t necessarily have stock in mind, possibly a h-s precision pst007 stock.

SOLD Brand new Kahles K328i DLR SKMR+ Reticle RSW (10707). The scope has never been mounted. It will come in the original Box with all paperwork and accessories/neoprene cover. Additional accessories include a 50mm Kahles objective cap and Kahles 50mm sunshade. $. Price includes shipping to the lower 48 , UPS adult signature required. PayPal F&F for the form of payment. Not interested in any trades at this time.
I will only sell to established Hide members that I can verify through their previous transactions and feedback.

I have had great luck with the brain trust that is the Hide.
Looking into replacing my 11 year old hot water heater . What I have now is a Richmond 50 gallon 240 volt 4500 watt .
With 4 kids and wife I don’t know if I should go bigger. Or just stagger bath time.
I thought about doing a heat pump water heater but not sure if it is worth it. House is all electric. Brands to look at brands to run from? Heat pump a good idea?

Located in Fairhope
Zelle or Paypal

FS-Labradar Bluetooth version
Comes with base, sight, power pack, microphone, case

$225 Shipped Conus-SOLD

great condition with cables,batteries and Box etc. asking 3800 shipped. Has around 3 years left or warranty.

Seekins Precision scope rings

30mm diameter
Low height
New, still in package

$90 shipped

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.


First Spear Slick - Ultra Lightweight Plate Carrier -SAPI Cut, Medium, Coyote Brown, new never used - SOLD

More Information HERE

So a Marine buddy and I are looking to build .338ARC pistols, maybe I’ll SBR mine but we’re looking for handguards that will accommodate a silencer under them. We’re going with a 8.5” barrel and looking to use 13.5” handguards but everything I see is all oh look how slim this is! I don’t want slim! I want meaty! I want thick! And I want a large I.D.

If you know of anything like this please drop some suggestions. Dare I say it there’s to many options and not enough gun parts search engines!

For sale is 4 boxes of new 6.5 SAUM ADG standard brass. $365 Shipped to the lower 48.

Looking for cole tac shooting bags and other gear
area 419 hellfire adapters, no brakes just the adapters

PM if ya are parting with anything.

This is awesome news- it's great to see this scumbag gangsta get charged!

Login to view embedded media