I see there are people will send their scope in to get modified so the turret is non-locking, this always puzzles me.
Can't we simply unlock the turret and leave it unlocked? This way you will always have the flexibility

SOLD
Chamber and muzzle thread 100% certificate. Expires 4-12-26. $325 Shipped USPS Priority Mail.

Payment via PayPal friends and family or USPS money order.

SOLD

Selling my Vudoo priest 2011 with SRO 2.5 with 2 mbx mags. Also has an atlas tool less guide rod with 8lb recoil spring and a phoneix trinity slide stop thumb rest. All stock parts included

Asking $3500.00 or best offer no trades please

Anyone got a spare dn5 muzzle brake laying around? Preferably 308 but would do smaller

Without warning Chad break 243 no tuner version

Raw stainless

450 shipped

I am mystified. Or just tired of being lied to.

Evidently, cockpit doors are not locked or even closed. And an old woman without even a utility knife can just barge in.

No need for 2 of these in my reloading room so I am letting one go. Excellent shape comes with a very nice delrin base I machined for it. 175.00 delivered

Excellent condition Vortex Razor gen 2 4.5-27x56mm EBR-2C (MRAD)
Ships in non original box with bubble wrap, boxed in another box with lots of padding.
Includes Tenebraex flip up dust caps and quick throw level and some turret marker labels.
Condition Notes:
Used, has a few marks and scratches from PRS use and scope mounting.
This is a rock-solid optic at a fantastic price. It's been sent to vortex and been looked over top to bottom. It's not been used or mounted since it was sent back to vortex.



$SOLD Shipped CONUS. Buyer pays all payment-related fees.

Selling a full precision rifle setup, chambered by Butch’s Guns out of Woodward, OK, and built with premium components. Rifle is used but in good shape. Current barrel has ~1300 rounds on it. Prefer to sell complete, but will consider parting out if the action and barrels go first. Stock is listed separately.

---

Build Specs:

• Action: Deviant Defiance
• Barrels:(2x) Bartlein
  • Current barrel: ~1300 rounds
• Trigger: Trigger Tech Diamond
• Stock: Foundation MG2
• Bottom Metal: Hawkins M5
• Weight Kit: Tungsten
• Magazines: 1-AI 5 round, 1-Accurate 5 round
• Scope: Razor Gen II 4.5-27 EBR2C
• Mount: Vortex PMR
• Bipod: Accutac BR-4
• Brass: 350+ Lapua
• Bullets: 750+ Nosler RDF 140s
• Will not come with TBAC brake unless buyer wants to pay for it.

---

$5499 shipped

• FFL to FFL — shipping included (CONUS).

Payment: Venmo, PayPal F&F, USPS MO (buyer covers fees if any)
Location: Central Oklahoma

Gently loved 44 mag in Stainless. Purchased to build a deer hunter. Bought Kenai rig and the works only to find the same model with a 7.5" barrel and a pretty minty leupy scope already mounted and ready to hunt. Don't need two, so my loss is your gain...

This big N-frame beast here:

https://www.smith-wesson.com/product/n-frame-163606

Sweet shooter and 100 yards one-handed wasn't difficult with irons on a 10" gong in SA.

1 Box of factory ammo has been sent through. You can have the brass with it.

$850 shipped to your FFL. FFL must accept transfers from private individuals or buyer pays FFL fees on seller end. FTF Sale in Pittsboro, Apex or Sanford, NC and I'll knock off $25.

Looking for a Schmidt & Bender 1-8x24 PM II ShortDot Dual CC MDR-T6

I was told that there is a variant of the 13 Mod 0 that had a detachable magazine. It was my understanding that they all had the standard floor plates. Is there any validity to this?

MORE WINNING!!!!

Few things for sale today. Message me with questions. PayPal FF, no notes.

Login to view embedded media
ATACR 1-8 FDE DMX Reticle SOLD

Badger Ordnance 1.7” FDE Mount with ARC + RMR top mount SOLD

ATACR 4-16 Mil-XT SOLD

Badger 1.54 Mount with diving board. Mount was cerakoted in LMT FDE by DOD. SOLD

LMT MLR 13.25 Stripped Upper SOLD

300 pieces (306 actually) once fired Lapua LRP 6.5 Creed brass. All from the same lot of factory loaded Berger ammo. $250 shipped.

Title says it all. If you have one and are willing to part with it, please PM me.

I appreciate it!

$35 per

Earth Folk,

Over the years, many people have asked me to design a cantilever scope mount optimized for AR-15 platforms. We'll I finally got around to it and here it is. We're calling it the AIR BRACE because the emphasis is on ultra-light weight while trying to keep the cantilever as stiff and strong as possible. The 30mm diameter x 38mm high mount weighs in at 4 ounces making it among the lightest in the industry, especially if one actually cares about the stiffness of the cantilever section. The mount also includes a level vial at the aft end that is back-lit through a hole that runs through the entire length of it, however, it is likely useful only for the young or those older folks lucky enough to see clearly up close. I used to be young.

Note that the images below are renderings. I'll post a picture of the real thing on a rifle soon. Torque values are 35 and 55 lb-in for the scope and rail respectively. I decided to go with one M4x0.7 screw for each scope clamp because it can handle torque in excess of 40 lb-in. Bear in mind that most mounts have at least two screws per side per ring to which 15-20 lb-in of torque is typically applied. Since we're doing the same job with one screw, twice as much torque must be applied, about 35 lb-in, to result in similar clamping force.

Should a two-screw version of the scope ring ever be required, we can easily and quickly introduced retrofit-able caps but I doubt that will be necessary. I used the AIR BRACE to hold a Schmidt & Bender 5-25x56 PM II on top of an old 10.2 lb Sako TRG-42 through which I put about 100 rounds of 338 LM. The experience was generally unpleasant because I really don't like recoil, but the AIR BRACE did its job maintaining and returning to zero. That said, our M-BRACE rings and mount are better choices for big stuff.

We're pricing the AIR BRACE at $349 but, since tomorrow is Black Friday, we're offering it at $279 though Monday.

Enjoy and have a happy Thanksgiving.


Ted

I have 9 bags of 100ct once fired Hornady 6creedmoor brass for sale. It is not cleaned or anything. Asking $55 (OBO) shipped per bag of 100. Or the whole lot for $450 shipped. Zelle, Venmo or PayPal F&F.

Can anyone recommend a good decently priced soft case that will fit a fixed stock AR-10 with a 20" barrel and large scope? All mine won't even fit a 15 and 18" barrel.

I have a Riflespeed gas block with the mid length tube. It is a .750 block. This is the RS7536 model. It worked great and it is super easy to adjust.
$125 shipped
No trades please

I have a Craddock RTR 13.9 223 Wylde fluted barrel. It is a 1/7 twist with a mid length gas system. I have around 150 rounds on it and it was extremely accurate. Consistent sub moa 5 shot groups. Most groups with 77 otm ammo were closer to 1/2" to 3/4".
$300 shipped
No trades please

New in box Athlon Ares BTR Gen 3 HD 2.5-15x50 APRS13 FFP MIL. Opened never mounted just didn't end up needing it.

Asking $575 shipped and insured. Payment through discreet paypal FF, venmo, zelle, or cashapp.

I have 233 confirmed trades on Reddit GAFS username AlternativeStation29. This is crossposted.

Brand new, 7 boxes.

$200 shipped.