WTS: 4400 Pieces of Sierra 77 Grain Tipped Match King

Will Sell in increments of 500 minimum.

$200 shipped to you per 500 pieces. Shipping only to CONUS.

Accept PayPal. Payment is net to me. Buyer pays any fees. Will also accept cashier's checks or USPS MO's as long as buyer is okay with waiting until payment clears.

The only trades I am interested in, please don't message me about any trades not listed below:

26" Prefit Barrel 6 Dasher for Defiance Ruckus with Chamber suitable for 109 LRHT and Alpha Brass
Swarovski EL Range Binoculars in good or better condition in 10x42 or 12x42
Kahles 540i DLR
Berger 109 LRHT
Berger 105 hybrids

Hit me up if you’ve got an FDE ZCO 420 in tremor reticle variety that you’re tryin to get rid of

Movies like Bonnie and Clyde, The Highwaymen, Public Enemies, The Untouchables, and Lawless have gotten me interested in guns of the prohibition era roaring twenties, and more interestingly, the guns of the "Motorized Bandits" of the 1930's. First up is a Modified Winchester Model 1907 in .351 SLR.

In its pedestrian form, the M1907 was a revolutionary weapon for its day. A blowback-operated semiautomatic rifle, the gun broke down into two pieces for easy portage. The M1907 was a popular Law Enforcement arm and was offered in “Plain,” “Fancy Finish,” and “Police” versions. The rifle’s production run spanned half a century. In 1907 the plain version sold new for $28. That equates out to about $740 today.

Van Meter’s 1907 had been modified for the specific mission of bank robbery by legendary mob gunsmith Hyman Lebman. The barrel was shortened and fitted with a modified Cutts compensator. A Thompson vertical foregrip was fitted to the forearm, and the weapon was converted to full auto. The gun fed from an extended magazine.

Hyman Lebman has also been known as Lehman. His son Marvin espoused the Lebman spelling. Lebman was a depression-era gunsmith and leatherworker based out of a modest shop in San Antonio, Texas. A gifted tinkerer, Lebman had a well-deserved reputation for modifying weapons to make them more tactically effective. His clients included such legendary gangsters as Dillinger, Nelson, Pretty Boy Floyd, Roger “The Terrible” Touhy, and others.
Lebman sold quite a few M1921 Thompson guns through his shop. In the heady days before 1934, the National Firearms Act machineguns could be purchased openly through the mail. It was also legal to convert weapons to full auto without any ancillary government involvement. One of Lebman’s most popular conversions was called the “Baby Machinegun.” This was a Colt M1911 pistol in either .45ACP or .38 Super converted to full auto and fitted with the vertical foregrip from a Thompson, a muzzle compensator, and an extended magazine. Lebman maintained a test range in his basement and once inadvertently loosed a burst from one of these weapons upward through the floor of his home, narrowly missing his son Marvin.

Lebman claimed he thought the sundry gangsters buying his guns were wealthy Texas oilmen who were simply firearms enthusiasts. In 1933 Lebman even hosted Baby Face Nelson, Nelson’s wife Helen, and Homer Van Meter in his home for Thanksgiving. Hyman Lebman continued gunsmithing until 1976 and died of Alzheimer’s disease in 1990. At least two of Lebman’s weapons are on display at the FBI headquarters in Washington DC as part of the Dillinger arsenal.

My Lebman 1907

Arsenal SLR 104FR , 5.45x39, the original Zenitco furniture, 3 mags, 1110 rounds included.
$2950 shipped. 2750 shipped
I can do face-to-face if you’re in West Texas.

Selling a Seekins SP10.

18 inch 308 barrel with adjustable gas block.

Has a sing stage TriggerTech, I haven't taken it out to see what model but it's a black housing with raised adjustable screw so I think it's what they call the adaptable.

I have not fired this rifle. I bought it thinking about redoing it into a different cartridge but I lost interest and already have another SP10.

It appears to have a pretty lowish round count. Almost no firecracking in the bore and gas port isnt eroded like a high round count gun. I don't know the total round count. I'd guess maybe 100 rounds fired just based on the wear.

There's a few scuffs on the Cerakote. See photos. I'll toss in a pmag with it. Not pictured.

2100 shipped to your FFL.

No PayPal. Mine is locked. Venmo gift or cover the fee, or Zelle.

For Sale is a Element Theos 6-36x56. Comes with everything included in the box, also comes with element Tenebraex flip caps. Comes with Area419 mount, and Area419 level for mount. Also comes with multiple sets of IDTS wet/dry erase elevation labels. $2300

Site has a 48 hour bump rule. Edit original post or last bump to change prices between then. Do not bump before 48 hours again or post will be deleted and you will be banned.

Purchased direct from Mile High September of 23 with high action rail, full length bridge/rail, and hinge. Rifle hasn't been fired other than AI test firing.

Also have added a bag rider and have a newer one by Sokek Solutions that I'll include. Will ship in original factory box with everything it came with, including AX mag, flash drive manual and trigger instructions/hex wrenches. $old shipped to your FFL in the lower 48. Will also sell without barrel for $4200 shipped. Not looking for any trades at this time. Thanks.

Looking for a Leupold VX-3HD 2.5-8x36 or similar set up. For a hunting setup for under 400 yards.

WTB
Schmidt & Bender PSR scope, pantone
or
Nightforce ACTAR M571 Mil-Spec 5-25 x 56 F1 CW T
Or one of these(apparently a limited contract scope)
Thanks for the consideration.

Selling my Area 419 Hellfire Match Brake & Adapter. It is in excellent shape and not all carbon fouled up. 5/8x24 threads. $110 shipped.

Want to buy 2 stinger mags to run in my vudoo.

I’ve got a lightly used magneto V3 that has been on a shelf for several years. I’ve got no use for it anymore so it’s up for grabs. It comes with a bunch of extra attachments that allow you to run it in various ways in case you don’t want it strapped to your barrel (some people record a shift because of that).

$225 shipped. I’ve got the factory box for the magneto itself as well.

Kiski Township Sportsmen's Association is running a 5 match Varmint Bench Rest/Tactical series in 2025!

Matches are running once per month, April -August with a Finale in September. Check out the website for details : www.kiskitwpsp.com

Match schedule and Registration on Practiscore: https://practiscore.com/clubs/kiski_township_sportsmens_association

Pics from match prep and the first match:


If you're in the SW PA area and interested, follow the links above or ping me here!

Don't have a tl3 anymore.

65 shipped Venmo no trades

Ive got a handful of cans everything from Rimfire to .223 to .30 to .458 but I don't like swapping cans on and off so I'm looking for a good can to just leave on a 8" 300blk AR for supers and subs... only real requirements are 1.70" diameter or smaller and $650ish or less
Thought about a polonium 30 or a direct thread omega or maybe a lahar30 but never held, heard, or been around any of them.
The .30 can I already have is a magnus and it's awesome but I don't want to spend that much on another and it's too big to fit inside the handguard of my 300 anyways

New never fired BRN-180 Gen3 556 13.9. I am listing it for today only before I simply return. Save a little bit of money buying mine. No longer have a use for it.

Selling a takeoff stock from a CZ MTR. Will come with bottom metal and cheapo amazon bipod if you want it. Includes recoil lug and action screws.

$150 shipped tyd

Not sure if any of you need one of these but I thought I would post it since I just got done making it.

I was having issues with the eyepiece falling off of my thermal. Made a small ring to go around the edge and put pressure on the eyepiece to hold it in place.

Happy printing.

Brand new PRI MOD 0 upper with colt bolt/bcg. ARMS bipod adaptor with harris bipods. Lower is a SOCOM colt “property of U.S Govt” marked m4a1 with a colt stock
$3100 shipped

1000 108 ELDM $360 TYD

Brand new, just went a different route. This is faxon 300 blkout match barrel. 1:8 twist

Asking $220 shipped.

Need a rod guide for a howa mini currently chambered in 6.5 grendel.

Let me know what you got

Ive been trying my hand at reloading 5.56 rounds in an attempt to duplicate the Black Hills MK262 Mod 1 ammunition that supplied to the US Military for use in the 18" SBR. Im using LC brass, CCI 41 primers and SMK 77 gr with the cannelure. My understanding is the military load develops a velocity of around 2,750 fps. Just for note, I measured the volume of the case with a seated bullet set to 2.260 COAL so I would not overfill the case and have a compressed powder issue. In working up my powder charges, the cases reached the point where they were filled with powder. I first used RE15 powder but was not getting velocities above 2610 fps. CFE223 powder reached a max velocity of 2630 fps. IMR 8208XBR powder reached a velocity of 2720 fps. I now have some TAC powder that i will try next. Im not an expert in reloading but Im giving it the ole college try.

I was wondering if anyone else is trying their hand at duplicating the MK 262 ammo and if you would be willing to share your thoughts and receipts.

Thanks!

Anyone ever try Solid Solutions Designs 419 grain .408 bullet? If so how did they perform?