Only installed once and did not work with my ARC Archemedes.

$220 plus actual shipping and insurance of your choice.

I will be at Leupold Best in Texas PRS 2 day match the weekend of April 26.

Origin short action with magnum and standard bolt heads, hlr and standard lugs, 7SS 23 inch proof barrel with about 150 rounds on it, comes with 100 pcs of brass and forester dies.. 50+ are loaded, mild no pressure 4831 @2890 (I will test more if I get a chance as that is from previous owners load). 6cm steel barrel I believe has 1750 rounds..

$1800 for all. Pics tomorrow

So.....what to do....what to do.
This POS is a frequent flier at the mug shot booth.

4.5x27 MRAD, EBR 1C reticle. It n good shape, works great! Upgraded to Kahles. Link to all specs.

$1,300 shipped.

Tacom Charlie TARAC adjustable up too 250 mils (870 moa)
Currently set at 120 MOA
Comes with QD rail mount and magnetic scope mount. Set up for a nightforce atacr but that can be changed out
925.00 + shipping

Only trades I’d be interested in would be a SA chassis or stock. RH or LF

I purchased these couple months back trying to set up a reloading room. But in the reality, I don't even have time to shoot my guns, let alone developing any load. So here we go, again
These are very highly sought after equipment with months of lead time. Unless otherwise stated, they are all like new with less than 50 rounds loaded (42 to be exact)

1. Annealing Made Perfect (AMP) Mark II. Comes with brass grip and extra pilots (02, 11, 17) for 308, 223, 300BO. Asking $1550 shipped. SPF



2. A&D scale Auto Trickler with Auto Throw V3. Comes with extra pulley belt set. Asking $900 shipped. SOLD



3. Henderson Trimmer Gen 3. This one is brand new, never used. Comes with 1 extra cutter for 223 (300BO) beside one for 308, and the brass bin & shaving containment. The base plate was enlarged (by Dremel) to clear the collar for short case like the 300BO. This was done after talking to Todd from Henderson since they did not make the hole large enough to trim short cases like 300BO. It also comes with the Quick Mount plate from Inline Fabrication. Asking $950 shipped for the entire setup. SOLD



4. Primal Right CPS. This comes with both large and small primer holders. However, I might have lost the tubes, which you can purchase at Primal Rights for $14 ea. Asking $650 shipped. SOLD



All items will ship out of Rockwall (east DFW, TX), Local pick up is also available. Payment accepted via PayPal FF or GS with fee covered by buyers. Any question please feel free to text me at 4six9 seven4eight 7eight7eight. This ad is cross-posted at SniperHide and ARFCOM

Also heads up. I will have other equipment such as Redding T7 turret press with extra turret and bunch of high end dies listed later. But I need time to sort things out since we just moved.

I have two Bartlein 6mm barrel blanks (RV Contour - 1:8 twist) - $575 for both, shipped to your door.

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Toying with an idea, anyone have an LMT’d Proof 16” .308 barrel?

I have an opportunity to get either one with zero wait time.
I want both but only one will come home.
I have a bunch of parts for the m24 like sights kit, MIRS rail, that’s a big plus.
I really like the M40a5 too, I may just flip a coin.

Just a question I hope some of ya'll know, if I want to be as true to the PWS way as possible, did they use the stocks with machined in pillars or did they bed pillars in? Just want to be sure before I click send on a stock order.

TT Diamond 2-stage with flat shoe. Brand new unopened.

$250 PayPal FF

Bought 2 months ago and put straight into gray ops cover. Will come with arca mount as well. $550 shipped.

Does anyone have real life experience or information on the new Sig Kilo 10k ABS range finding binos. Cameraland has them listed on their website as out of stock. Haven’t come across any other information. Seems like a new release but also very possible I’m just behind the times.

Also known as the “Anti Rape Knife,” since discontinued.

Any of this real?!

Has anyone acquired the new sinus brake from Germany? Wondering about others experience in general or specifically with the adjustable ports and integrated tuner.

I hauled my dad along this weekend to go shoot some rifles out past 1000 yards. He had some pretty good success with it. His first time past 1000 yards and probably his 3rd time past 500. I got to see a couple of my good buddies that I like to shoot with as well. The wind was swirling and gusting 12-16 mph. Just thought I would share with the group. This is the first group he shot at 1776 yards.

Looking for a needle in a haystack. I need the box to an r700 SA RH ACC ELITE in FDE. I’m addicted to keeping the OEM boxes to my gear and not having one for chassis driving me nuts! I bought the chassis 2nd hand and it didn’t come with the box.
After you finish laughing, let me know what you have and what I need to pay for it.
Thx

So I have a love affair with the far Arctic... and since Africa has just gotten stupid in terms of costs and safety... I decided that I'd look North instead of South.

Pulled the trigger officially today. April, 2022... heading to Edmonton then Nunavut... well above the Arctic Circle... to hunt Muskox.

Going to be an amazing trip! I have friends counting the minute until their next tropical cruise where they can sit with 5,000 people on a floating bar... No thanks! Counting the days for what should be a hell of an adventure!

Now let's hope that the Gerbil Prime Minister Justin Bieber -- er -- Trudeau... doesn't ban Muskox or something.

@Sean the Nailer ... what should I wear in April in Nunavut? Guessing Hawaiian shirt and Vans are not recommended?

Cheers,

SIrhr

Xtr pro throw lever- sold
Xtr pro black elevation turret- sold
Xtr pro exposed windage- $40

I am looking for 338 Lapua barrel for my AXSR.

Surprised no one’s posted anything about this one yet. A guy broke into the Pennsylvania governor’s mansion with a Molotov he made out of lawnmower gas and Heineken bottles he found on the property and tried to burn the place down with the governor and his family inside.

Supposedly he was also carrying a hammer and was going to beat him if he found him.

https://www.foxnews.com/us/pa-gover...mitted-harboring-hatred-toward-shapiro-police

I know, its been talked to death. But I am still curious.

I have a AR build with a lot of Mk12 flavour, with 18" barrel, rifle lenght gas and an AEM5 suppressor.
So far I have used a standard carbin spring and a H2 buffer.

But last week I got myself a Schmeisser multi wire buffer spring, which is a bit like the Geissele mg42 but with 2 strands of wire and compatible with regular mil-spec type buffers. The multi wire spring is a bit stiffer than the carbin spring. Some say that a stiffer spring with a light buffer is better for function. Others seems to prefer to add weight with a heavier than normal buffer. I did some testing the other day at the range.

I tried the multi wire wring with a carbin buffer, recoil was light but also snappy, at least that is how I would describe it. Ejection pattern was at 14-14:30.

Then I switched over to the H2 buffer and multi wire spring, a bit more recoil was felt but it also felt more controlled, more of a push. Ejection pattern was at 15:00.

What would you run?
I have thought about getting a H3 buffer but I am not sure it is worth the money.
I am not switching to an adjustable gas block.

***SOLD***Selling a NF ATACR 7-35 Mil-C F1. This is a catch and release. Bought from Hide member “1260” and used for one match. Only selling because I have too many scopes! Minor scratches and wear, espically around the eyepiece (pictured). Glass clear. Missing windage cap and objective covers. Selling for PRICE DROP $2100.

Area 419 34mm 1.54” mount with normal height diving board and box - $300

Couldn’t really resist the purchase after examining one. Very few tool marks, and the only polymer part is the bolt shroud, magazine body/rotor, and stock. The Picatinny rail is alloy, apparently with no tilt. The receiver is tubular, with the rear receiver ring the same size as the front so I don’t know right offhand if an existing scope rail will be compatible. Not a Rem.700 footprint, but does have a hanger for 700 clone triggers.
Ruger brand mags fit like a glove, but I haven’t tried feeding live rounds yet. Overall the build quality is definitely there, I just hope the barrel God’s have smiled on me and this example actually groups well. All factory goo has been removed, I’ve greased, oiled, and adjusted, so I’m just waiting to test. I’ve slapped a 1” tube 8-32x44 scope for break-in.