Hi all,

I am building a new 300 PRC, will primarily run it with a suppressor for hunting so I am planning on having.a short barrel spun up. Thinking 20 or 21 inches.

I currently have a 22" 300 PRC Seekins Havak Element that I am selling to build a custom gun (stupid, but I need to scratch the itch) and I am perfectly fine with the performance of that gun on game.

Question is, anyone have experience going shorter? 20, 21"? 20" would be phenomenal for me but not sure what people are pushing pills at with that barrel length. I do reload now, so factory loads are not something that will hold me back. Primarily will be loading the 190 grain LRX.

If anyone runs a 300 PRC at 20, 21 inches, would you mind sharing your bullet weights and velocity? Thank you in advance!

Edit: curious about twist as well in the shorter barrels, I am planning 1-9 which I think should cover me from the longer mono's up to the 225's.

I have 300 same lot brand new alpha 6gt brass srp $390 shipped with the cases

We have the Tangent Theta 7-35x56 with the Gen 3 XR fine reticle in stock! Order a scope get an amazing deal on the rings, so good I can’t post it. Message me for more info.

I have a couple in stock. Rem 700, Right hand MDT carbon stock. They went quick last time!

Login to view embedded media

Well this PD cooked their own crack in a court house and sold it - cheaper than the competition. 3000 drug convictions to be overturned.

Fucking scum bags.

Very good condition, 5/8-24 thread pattern. Wasn’t shot much at all, comes with wrench. $35 shipped for all.

VERY lightly used (not even sure if I used all three). $75 shipped CONUS

Kahles 624i SKMR3 used. Minor scratches. Mechanically sound. What you see is what you get. $1500 + shipping.

I have a LMT MARS-HS LE contract lower with a hyperfire single stage, green sprinco, b5 precision stock.

Upper is a Centurion Mk11 with an 18" Criterion M118LR barrel, I've got 460 rounds of 118LR on it. Has the 15" URX4 and the D Wilson Arca rails. Knights Armament BCG and your choice of a Knights Armament or a Raptor charging handle. Currently has a HUX suppressor mount on it.
I shot 10 0.75 MOA groups +/- 0.2 MOA in a row with Lake City LL18LR. The rifle is very accurate. The paint makes the gun look way older and more used than it is. I can remove if desired.
3300 sent to your FFL.

We've been watching this happen out here in the middle of nowhere for at least a few years.

Login to view embedded media

I have the DMR in 6 arc with 22" barrel. I want to go shorter for suppressor use. Should I have the barrel cut down or go with a new barrel. I don't hear much on the quality of seekins barrels but this one seems to shoot factory ammo well.

4000 Federal 205m $320
4000 CCI BR4 $320-sold
5000 CCI 450 $400

Local pick up in DFW

Would like to sell a MPA MATRIX PRO chassis with full internal weights and external steel weights. Would sell for $1500 shipped. Priced now at $1200 shipped

Hawke Frontier ED X 8x42 Binocular reduced from $539.99 to only $349.99

If you want an amazing binocular while getting a fantastic deal then this is your new binocular. All Frontier models feature Hawke's new H7 optics, offering stunning high definition viewing with incredible color control and phase correction.
High performance lens coatings and Dielectric Coated prisms ensure the highest level of light transmission.
ED X models benefit from Extra-low Dispersion glass for controlled chromatic aberration and the elimination of color fringing.

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Features:
Extra-low Dispersion (ED) glass
Dielectric Coatings
High resolution phase corrected BAK-4 roof prisms
Water repellent lens coatings
Magnesium alloy chassis
Focus from 2m
Replaceable twist-up eye cups with position stops
Stay-on lens covers
Nitrogen purged. Waterproof. Fog proof.
Hawke No-Fault Lifetime Warranty
Objective Lens 42mm
Magnification 8x
Optical System System H7
Field of View (°) 8.1
Eye Relief 18mm
Exit Pupil 0.21″/5.3mm
Lens Coating Wide Band, Anti-reflection, Fully Multi-Coated Lenses with Water Repellent Coating
Field of View 426ft @1000YDS
Apparent Field of View (°) 65
Interpupillary Distance 56 - 74mm
Close Focus 6.6ft
Prism Type Roof
Prism Glass BAK 4
Eye Cups Twist-Up (Replaceable)
Eyecup ⌀ 1.8in/45mm
Diopter Type Right Eye
Tripod Mounting Thread Yes (¼" - 20 UNC)
Height 5.5″
Width 4.1 - 4.8″
Weight 25.6oz

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

In good condition, used this for a bit before switching to arbor dies. Never had any issues with it. Also works for BRA. $75 shipped.

For sale is a like new Kowa TSN-55a. Comes in original box with everything as new. I bought these in September and took to them to Colorado for an elk hunt. Spotter never left the truck. Great glass and very compact.

Asking $1625 shipped OBO

Vortex Viper HD 10x50 Binoculars and contents shown. Has been used but very well taken care of. Only used for hunting deer and coyotes the last two years. Only reason for selling is to buy rangefinder binos.

250 shipped CONUS

PM any offers please.

Browning White Gold Medallion 7mm Rem Mag Burled Stock $1,700 $1,600 $1,400 Shipped OBO

Supposedly there's only 3 rounds down the pipe, see the bolt face pic for yourself - I haven't cleaned it.

I tried to get the blemishes in pictures: there's some safe nicks on the inside of the stock, and there's some rubbing on the SS finish about halfway down the pipe.

If you'd like more pics, just PM me.

Todd Hodnett in his article talked about running .338 lapua from 20 inch barrels and building a future 20 inch .300 Norma.

http://www.accuracy1stdg.com/content/docs/Binder7.pdf


Anyone running a 20 inch barrel in these calibers. I love shorter barrels with a suppressor on the end.

Was looking for some examples of rigs like this.

I have a build sheet from sako collectors that shows it left the factory in September 1958. Factory original barrel and look darn good for its age. Stock was replaced at some point with this heavy target stock. Pm with any questions or trade ideas.

$1000 shipped

I have a Mosin Nagant 91/30 Izhevsk rifle that I have Modified that so far, shoots three shots MOA. I like it, I like Mosins along with Mausers and prefer to shoot Older guns than new stuff. I do not have a picture of my group but will go shoot one for those who believe there may be some previous posters here that are full of shit and lie about their rifles and ability to do as Bill Clinton lies about everything so here is a picture of my rifle and my group was shot with a handload and to be noted; My rifle shoots less than 2 MOA with PPU 150's factory stuff but loves my 49 grains of 4320 and a 311 Sierra 150 a lot more. I do not shoot off benches and am not a benchrest shooter and never will be. I play in the woods mostly, you know, like the name of this site? Not Bench shooters Hide, it is Snipers Hide. Simo shot a hello fo lot of Germans but not off a bench and neither did Carlos, which by the way is a fellow Arkie so start kissing my ass now! LMAO

So... factory rifle (Sav 10BA) that I've had for a while. Long story short, it's one of those guns that's always been a thorn in my side for one reason or another. Last year, after putting a new (NSS/Criterion) pre-fit barrel on it, I realized the scope rail was loose - again. Figured I'd fix that thing, once and for all. Got the JB weld out, and proceeded to (intentionally) permanently bed the rail (Farrell steel 20 moa) to the receiver. Cleaned it up, and let it sit to cure. Later, I was a little afraid that I maybe didn't get enough release agent on the screw threads and/or in the holes in the receiver, because I couldn't loosen the screws. Ah, well. The damned thing was glued down tight, done.

Except... the gun continued to disappoint. Couldn't find a load that worked. Imagine if you will, a 20" .308 Win that doesn't appear to like Berger 175 BTs, IMR 4064, Lapua brass or 210M primers - might break 1 moa on a good day. Weird, right? Checked action screws, swapped scopes, etc. Nada. Out of desperation, I tried some FGMM S175MK factory ammo. A *little* better, maybe. Borrowed a different chassis from a friend, and tried it again with some Berger factory 185 OTM ammo. First group was good, easy half moa. And it went downhill from there. 1.25-1.75 moa, two-group, shotgun pattern, stringing, etc.

Got it home, debating WTF to try next. Took the scope off, put it on the shelf. Took the chassis off to take back to it's owner. On a whim, I grabbed a torx key, and tried the rail screws. I mean, it sure *shot* like something was loose. And... while none of the screws were exactly 'loose', they sure as $hit weren't what I'd call tight, either. And they *all* came out, vs. before when two of them wouldn't turn at all. The rail was still on there, wouldn't come off with finger / hand pressure. Grabbed a small 8 oz ball peen and tapped the back of the rail and... it slid right off.

So now I've got a receiver with JB Weld residue on top, and a steel scope rail with JB Weld residue on the bottom, and no bleedin' idea how in the flying f$ck that joint came loose like that. The gun was either in the safe (most of the time) or in a case to and from the range. It wasn't exactly left out exposed to hot/cold or chemicals or anything that should have loosened the bond.

I guess my questions are a) best way to remove the remaining residue without (further) damaging anything, and b) ideas as to what might have gone wrong with the previous bedding attempt that it failed like this? Bad batch, bad mix, something else?

Just got my 3rd S&B 5-45 High Power .... Previous ones are...MT .5cm LRR Reticle .

This latest one is DTII+ and .1mrad....GR2ID Reticle...

Having both the 6-36 and 10-60 S&B,s.....the 5-45 is right up there optically!!
Unlike many I prefer the old layout of separate illumination dial, and prefer the older focus dial..

I have been looking for one or the other but have had no luck. I've tried several vendors on the Hide, but all are sold out. Can anyone recommend a vendor that has them in stock? Terminus Zues SA inlet.
Thanks

For sale; Custom GA Precision rifle.
Badger 2008 short action currently chambered in 7/300 WSM, 24” Bartlien barrel, 8.7:1 twist for 180 Berger hybrids. Surefire 2 chamber brake, Trigger-Tech trigger, KRG Whiskey-3 folder chassis.
Schmidt-Bender PMII 5-25x56 Tremor 2 scope in Spuhr mount.
Includes 4 Accurate Mag 7 round WSM mags, 150 rounds of custom Copper Creek Berger 180 hybrids. 2900fps@4000ft MSL. Plus rough 240 +/- pieces of 7/300 WSM Brass. Tan Pelican case. *bipod and scope level not included. Not interested in trades or parting out. $5000 complete or $3000 for rifle with brass and case. $2500 for S-B scope and Spuhr mount.