• Having trouble using the site?

    Contact support
  • You Should Now Be Receiving Emails!

    The email issued mentioned earlier this week is now fixed! You may also have received previous emails that were meant to be sent over the last few days - apologies, this was a one time issue and shouldn't happen again!

Filter

SOLD AK PMAGS Plus 7.62x39MM Ammo Package Deal

Hi, I thought I had these sold to the person who bought my Krebs but they ended up not buying them in the end. In the interim I had packaged everything for shipping and I'll be fucked if I'm going to unbox it all. So, for sale is a great package deal for you AK shooters which consists of 1,220 rounds of ammunition and 12 PMAGS (a $970 value). Get the whole shit and caboodle for $750 $650 $550 shipped/insured to your door.

7.62x39MM Ammo

  • 700 Rounds in Sealed Tin w/ can opener
  • 180 Rounds Loose
  • 340 Rounds wrapped (17 packages x 20 rounds each)
1,220 Rounds Total

Unsealed rounds were opened on April 10, 2024 and have been stored in a temperature and humidity-controlled environment

No Shipments Where Not Legal

MPNB762FMJ700TIN
ManufacturerBARNAUL AMMO
Caliber7.62X39MM AMMO
Bullet TypeFMJ
Muzzle Velocity2543 fps
Muzzle Energyft. lbs
PrimerBerdan, Non-Corrosive
CasingSteel Casing


MAG® 30 AK/AKM GEN M3®

30-round GEN M3 reliability for your AK

12-30 Round PMAGs for your AK. Only 6 of these were ever loaded with ammunition (I don’t know which 6 now). All are in perfect condition. Bring your range day to another level!

No Sales Where Not Legal!

TECHNICAL SPECIFICATIONS

Caliber7.62x39mm
PlatformAK / AKM
Capacity30 rounds
Weight7.4 oz.
Length, max9.1 in.

Attachments

  • IMG_2427.JPG
    IMG_2427.JPG
    574.8 KB · Views: 27
  • IMG_2438.JPG
    IMG_2438.JPG
    376.1 KB · Views: 28
  • IMG_2441.JPG
    IMG_2441.JPG
    298.6 KB · Views: 25

Optics ZCO 5-27x56 MPCT-1 For Sale With ARC M-Brace Mount ****PRICE REDUCED****

Selling this slightly used ZCO 5-27x56 MPCT-1 Reticle and ARC 8.7 MIL M-Brace Mount. Scope is in immaculate condition and has functioned flawlessly since new. Turrets are the locking version.

Comes with box and caps as shown.

No trades please.

Shipped and Insured to you for $3400.00

20241030_182804.jpg
20241030_182944.jpg
20241030_182749.jpg

SOLD Tangent Theta 5-25x56 Gen3XR

Used Tangent Theta 5-25x56 Gen 3XR reticle. Comes with original box, scope caps, and the little sunshade.

This scope is used and has some scratches and scuffs on the finish, but glass is pristine and it tracks well and holds zero.

I switched to a JTAC reticle, otherwise I'd have no reason to sell this scope.

$3,550 shipped.

Trade considerations: Foundation Centurion + Cash

Attachments

  • 20240925_061647.jpg
    20240925_061647.jpg
    586.8 KB · Views: 290
  • 20240925_061843.jpg
    20240925_061843.jpg
    290.7 KB · Views: 301
  • 20240925_061752.jpg
    20240925_061752.jpg
    220.1 KB · Views: 291
  • 20240925_061741.jpg
    20240925_061741.jpg
    650.9 KB · Views: 259
  • 20240925_061722.jpg
    20240925_061722.jpg
    455.1 KB · Views: 254
  • 20240925_061713.jpg
    20240925_061713.jpg
    291.5 KB · Views: 240
  • 20240925_061657.jpg
    20240925_061657.jpg
    277.7 KB · Views: 262

SOLD Tbac CB 30 cal

Selling a new in package TBAC CB 30 cal brake.
$115 shipped firm. PayPal preferred

Will post pic when I get home.

  • Like
Reactions: InnaWoods86

Rimfire *Reduced*- FX Crown VP MK1 .25, SaberTactical Chassis & Extras ***SOLD***

FX Crown mk1 VP .25 600mm, with SaberTactical folding chassis with rear monopod adapter.
Fitted with a 600mm slug liner with DonnyFL FX LDC and UTG Bipod
also includes the original 600mm pellet barrel assembly,
2nd shroud and fittings from slug assembly(the thread adapter had damaged threads when
I received it, still threads in but doesn't fully engage the shrouds threads so I opted not to use it)
1 Magazine and synthetic stock.
Scope, mounts and tripod not included.
Asking $1,050 shipped Cont. USA ***SOLD***
PXL_20240918_210923730.jpg


PXL_20240918_211155697.MP.jpg

PXL_20240919_005344879.jpg

PXL_20240919_005202513.jpg

PXL_20240918_211359910.jpg

Travel case for four handguns

Looking for a good, solid case for four hand guns, possibly five, two are full size, two are compact and one is middle of the road size wise. I'm probably going to bring 3-4 mags each and possibly two suppressors if I can figure out the paperwork for that.

I see quite a few offerings on Amazon that look like they'll work and maybe I'm overthinking it but they all seem to have plastic eyelets for the locks instead of some sort of metal reinforcement ring. So easy to just cut through that portion of the case and take off the locks. I'll be flying and yes, I'll be using NON-TSA locks.

Any better offerings out there?

Any Local Ghost Stories worth sharing?

I haven't come across this topic being discussed here so thought I'd start a thread on the subject. I'm personally a skeptic by all means but love a good local ghost story. For me- it's the history that builds up the reason for why an object, room, location, what have you, is 'haunted' because that's usually grounded in some part to factual history.

To start the discussion off- here's a story of my own. Decades ago when I was in High School- local legend surrounded a place called Amity Hall in Duncannon, PA. This building had so many stories surrounding it but from what I remember it was an old fashioned stop for the carriage lines at the time. Apparently being a hotel of sorts then, there was a lot of speculation of why it was shut down many years ago which conveniently checked all of the boxes for a young adolescent's mind of a place that was haunted. A defunct hotel- with murderous stories that alluded to a blood stained room, a ghost of a woman that hated men, locals that rivaled the hillbillies from the Deliverance movie, and even hellhounds that allegedly patrolled the grounds. Many a High School students tried to prove their bravery at that time by stepping foot in that building but apparently the building burnt down about 15-20 years ago.

I reckon that it's not so much the authenticity of 'ghosts' but would imagine that these type of stories perpetuate all across the country if not world and thought it'd make for a good thread sharing those local legends. Any interest?

-LD

SOLD SOLD fde leupold mk5 3.6-18 pr2-mil w badger c1 and cliff tan

Flat dark earth Leupold mk5hd 3.6-18×44 with pr2-mil reticle. Comes with badger ordnance 1.54" 0moa condition one mount, badger accessory ring cap (ARC), and clif rail. Original box, sunshade, and everything as it came from the factory is included. Excellent condition, glass is perfect. Will not seperate. $2100 shipped, no trades please.
1000012385.jpg

1000012386.jpg

1000012387.jpg

1000012389.jpg

1000012390.jpg
  • Love
Reactions: TicTacTex

Advantage of tremor reticle in spotting scope?

I have a Bushnell LMSS with a non tremor Horus reticle which I have gotten good use out of but want to step up the glass. Going to buy the Nightforce CFS and will probably select the mil xt s reticle. They have a tremor 4 version and I am trying to understand why anyone would pick that reticle.

Nightforce cfs

My primary purpose is shot spotting and I think the wind dots will only obscure my view and provide zero useful info. I suppose you could hold at the same dot if the shooter is using a tremor reticle and give them a quicker correction in the same language. “Move 1 dot right and 3 mils up.” Seems overly complicated and I’m too lazy to constantly move and level the spotter. I like to hold the reticle center target because I find shots that miss high don't miss too high and are easier to spot with no reticle in the way while still allowing me to give a correction. I have had no formal training in this but just seems to work best for me.

Am I missing something here? I assume they wouldn’t pay Horus to use this reticle for no reason.

Solus in a KRG Whiskey 3 clearance

IMG_8539.jpeg
IMG_8562.jpeg
IMG_8563.jpeg
Just thought I’d offer a public service announcement on a small clearance issue with a Solus action in a Whiskey 3. And I suppose other KRGs.
I used a Triggertech Special in this build and went to check safety function and realized it was barely engaging. Turns out the safety arm runs into the small shelf in the chassis. It was a simple matter of milling out a small pocket as shown. I’m a jeweler so I had the tools to mill it fairly cleanly but a dremel would take care of it as well.
If you tap the safety a few times to the rear and look at the chassis shelf you’ll see a small white nick where it starts to rub. Just take out 1/4 depth of material from that point to about 1/2 inch rearward and you’re good to go.
1st shot shows the pocket I cut. You can see where it stops in the second photo as opposed to where it should travel to in the 3rd.
  • Like
Reactions: sgtsmmiii and FuhQ