GPO SPECTRA 6x 4,5-27x50i in great condition. The glass on this scope is fantastic. Only reason I’m getting rid of it is because I’m switching all my scopes to the same reticle. Has LRPro reticle. $700 shipped.

This is a 1st-year Savage Model 10 .308 AccuTrigger, purchased new in Austin in 2003, cut to 18.5" and threaded for an old-school AWC ThunderTrap. It's what I cut my teeth on 20 years ago, back when we didn’t have good stock options or affordable glass for a young engineer starting a family with a wife at home cranking out great-looking boys (and a girl) who clearly benefit from her staggering good looks.

Speaking of good looks, what a way to bring this rifle back to life: an MDT XRS chassis and Arken SH4 4-16X50 GEN2.

It's honestly remarkable how good this rifle is for the money.

I had almost forgotten about this rifle (if you can believe it) because I threw the can on my .300WM for a while and sold the glass off the Savage. The barreled action laid around in the workshop for about 14 years.

Now, I’m excited all over again.

Range results will be shared later this week after the F1 madness in Austin dies down.

Stay frosty.

This has never been out of the box.
Comes with tripod and ballhead
$650 shipped and insured

I can only take Zelle, cash app, usps mo, cert check for payment

$650 value

Asking $430

Expiration 9-30-25

So I had to send in a LHT for warranty service after a failed custom turrent installation resultedin the turret being superglued in a locked position.

Got the scope back and mounted it. 1st range vist had trouble getting it dialed in. Thought maybe it was me. Went back yesterday and was shooting well. My Benelli Lupo with VX-5 printed the attached group so I know I was on. I could not get the LHT to zero again! Right before the mishap that caused the warranty issue I was printing 1/2 inch groups at 200.

So a few questions:

Has anyone had trouble with a Vortex directly after getting it back from service? Does vortex have some kind of recoil machine or something they test these in before they send them out?

I can switch it for a Veractiy I have lying around to test the scope to see what happens.

Should I try to print a group at 50 or 25 or something to see if it might just be me at 100?

Once I started to chase it, the gun did admittedly get hot, but from the outset this seemed to be an obvious issue.

Thanks for any feedback or tips. Right now, I would not take that gun hunting and am trying to find the most efficient way to figure this out.

Brand new opened box never had the caps removed.

MDT 30mm Scope Ring Set - 30mm - 1” Medium Height

$200 Shipped

I'd like to build a left hand 308 hunting rifle. I'm not quite sold on the Bergara HMR in 308 in left hand. I'd like to keep the barreled action south of 1200k. This won't be for long range hunting either, just general hunting and some target shooting.

Picked up a socom 16 the other has the green poly stock .. wonder if anyone has a wood stock they might want to sell ?? Or even trade..

Just today I gathered my SD's for my new build and next weekend I'll be calibrating my true muzzle velocity through my Kestrel 5700. The issue I have, is the data the Kestrel gathered puts my round at the transonic barrier at 1398 yards. I know I am supposed to use a target 15% back from 1398 yards to get my result, but my range only goes out to 1100 yards. If I was to scale back to 1100, or even 1000, will this mess up the inputs and give inaccurate results?

Cartridge: 6mm XC
Bullet: 115gr DTAC
MV: 3026.7
SD: 4.8
Spread: 14.4

Have zeroed two optics with it and ran a couple mags. Right around 200 rds total
FCD Keymo MD and FA
BCM Charging handle
Centurion Bolt, Rail Covers and Handstop
More Specs Listed on Timestamp

Checkout my other Listings

$675 PP F&F Shipping Included

I bought a couple mags for my AI. The 3 round isn’t tall enough to grab the mag release so I need another 7 round instead

This is the double stack WSM magazine

Straight up trade or

$65 shipped

Had this built the end of last year and shot exactly 14 rounds through it. Just don't have time to shoot right now.

ARC CDG action, PVA straight flute barrel, brake, TT diamond, XYLO chassis.

Everything was new with the exception of the chassis when this was built.

$2500 (net) including shipping. No scope or rings. They will be listed separately

I have multiple items for sale first is a I2 pvs 14 in a vyper housing, green phos, L3 18mm tube, 1817 fom, 64 res. This unit has sat in my safe for a long time. It was and extra one I had for my wife to use as a monocular when she hunted with me at night which was never, I ran ANVIS 9s so I never used it. I have the data sheet, no blems. PRICE 2700$

Second item OPS Core fast bump helmet side M/L which is a L in the new ones. Tan helmet with the 4D tactical foam lux liner inserts, TNVC Mohawk, EOG chem light holder I used for batteries. The helmet has 4 pica-tinny rails sections on it and it comes with the protective covering for storage or transport.
PRICE 300.00$

Third item is a USGI PVS 14 3x magnifier
Price 300.00$

Fourth item custom made PVS14 IR filters and purple filters that screw into the ocular side of the 14 to change the color for enhanced visibility. The IR filters are the good ones that are milspec they typically go on the other side of the 14 for laser protection. If flipped to the ocular side it changes the Green phos to a grey color that I personally prefer..see pic
Price 2 purple filters 100.00 for two
IR filter 100$ for one

Last are Pvs14 weapon mounts
J arms
Rhino mount for J arm style
Make me an offer on these..

Good morning everyone! So i have run into a bit of an odd situation. I am in need of the parts diagram for the SW 5.7 and FPC. While smith says they dont give them out to the public, i am hoping someone on the forums might have the PDFs they can share. Thanks in advance for your help

WTS my Reptilia AUS 34mm with ROF Bridge and ROF 45 rmr. Everything is in great condition. $OLD shipped or will trade for a badger ordnance C1 max 34mm 1.3 height plus cash.

Here’s what’s I have for sell 25 creedmoor rifle chassis is sphur folder with internal and external weights. Action is cutis valor with 26in benchmark barrel 5/8x24 thread at the muzzle with mdt 12 round magazine and trigger tech red diamond single stages. This is a turn key rifle. I have the reloading stuff to include:
1. 200 round of Lapua small rifle brass
2. 400ish 135 Berger hybrid
3. Short action full length sizer .282 neck shoulder bushing .262 mandrel
4. Whidden Mirco seater 6.5 creedmoor
Asking $3800.00 shipped

I would like to commend Trijicon on their great customer service.
I returned a ACOG TA110 for a couple of minor issues (nothing that prevented the scope from working - just me being a bit anal LOL).
I love the scope but knew I would be bothered.
The service team at Trijicon took care of me and I couldn't be happier.
Charles

I started a couple of convo’s with guys in the for sale section. These two guys started convos with me instantly. They have both been reported. Is this common? Haven’t bought anything for awhile.

This is the gun that started it all for me in 1986 in ROTC. I learned 3 Position shooting with this rifle in high school. Those were the days.
These were an Olympic grade pellet rifle in the early 80s and will punch a single hole at 20 meters. Out of nostalgia, I purchased this one when I taught my son to shoot 13 years ago. It functions flawlessly. Piston is still pretty fresh though I haven’t chronographed it. It also includes a new piston cup as well as a few extra front sight inserts. If you are unfamiliar with these, it’s a single shot side lever. .177cal pellet. Designed specifically for 20meter shooting. Weighs about 10lbs
And it’s still a tac driver rifle. Still prints single hole groups if you have it in you.
Rear peep sight is original to the gun.
I ok’d it with my son so we are selling it to fund a new build.
Asking price is $850 shipped. I figured I’d post here before eBay only because I knew this crowd better.
Or WTT for an action. Preferably Origin, but open to others that take readily available prefits. anything that proof sells prefits for. ARC CDG, Defiance etc etc. New or clean Solus. .
Also open to short action REM 700chassis, KRG, Solus, mdt

New never used holds 120 rounds in 3 binders of 308 based caliber shells. $150 125 shipped.

Thanks J

Sherrif calling it an attempt.....could just be a dumbass but I doubt it.

So I have abandoned bolt guns cause I just wanna go fast now, and I am just not into PRS matches anymore I been wanting to do field matches as a second shooter. Cause I wanna go fast.

So I have built 2 gas guns one in 223 and 6 ARC.

Seekins DMRs is in 6 ARC it’s waiting on final assembly

223 Lego build with a bunch of parts.

But I have noticed that the buttstock on the 223 have a good bit on side to side play in it. So I am debating on switching to a fixed stock.

Wanted to ask anyone perspectives on a loose buttstock for a fixed one and if it had issues on POI shifts from zero?

I own a IHC M1 that I purchased from CMP in 2005 that I believe is a LEAD rebuild. The serial number is 4,550,6XX. It has an LMR barrel dated 4-53, and all the major components (Bolt, trigger housing, op rod, hammer, gas plug, etc.) are IHC marked. The stock has a circle "P" in front of the pistol grip and the number "3162" in the barrel channel. While this rifle has a postage stamp style receiver marking that reads "U.S. RIFLE / CAL. 30M1 / INTERNATIONAL / HARVESTER/ 45506XX", the side of the receiver is marked "D6528291-E" and "LEAD 10-64".

From what I can find, receiver drawing number D6528291-“E” was assigned to HRA rifles.

Has anyone ever come across a IHC receiver marked like mine?