Filter

KRG Bravo Pic Thread

I searched for a KRG Bravo pic and info thread but I couldn't find one. If it's out there, please share with the class, otherwise there really needs to be. The Bravo has become a staple in the precision rifle world with it's affordability, quality, and modularity. A guy can buy the basic stock, then, if he so desires, bolt on everything from ARCA spigots to weighted LOP spacers. If there's not already one out there, let make this a place to share unique creations using the Bravo.
786C957A-6674-4FB4-8C11-2375CB4BAA70_1_201_a.jpeg
1353092C-42FB-452F-828E-20A673125E00_1_201_a.jpeg

Optics Leupold mark 5hd mil ffp tmr reticle

Leupold mark 5hd FFP in milrad with TMR reticle. Lightly used. No major wear. Glass is good. Rings come with it. See pics. This is not illuminated
Let me know if you need more pics.
$1800 shipped

Attachments

  • IMG_5088.jpeg
    IMG_5088.jpeg
    425.2 KB · Views: 90
  • IMG_5087.jpeg
    IMG_5087.jpeg
    472.1 KB · Views: 83
  • IMG_5045.jpeg
    IMG_5045.jpeg
    978.5 KB · Views: 82
  • IMG_5044.jpeg
    4.3 MB · Views: 19
  • IMG_5043.jpeg
    4.1 MB · Views: 22

Firearms Ruger precision 338 lapua

Ruger Precision 338 lapua. Very well taken care of. 200 rounds through it. Catalyst arms angled bag rider. 00 Moa anarchy outdoors picatinny with bubble level, 2 steel lop weights, 2 mdt weights, 2 grey ops weights, timney two stage trigger, custom grip with thumb rest, wiebad cheek pad, 1 mag, fluted bolt shroud anarchy outdoors, custom bolt knob anarchy outdoors, extended mag release.
$1900 shipped to your ffl.
$1700 dfw ffl
Let me know if you would like to see more photos.

SCOPE AND RINGS NOT INCLUDED

Attachments

  • IMG_5164.jpeg
    5 MB · Views: 71
  • IMG_5162.jpeg
    IMG_5162.jpeg
    2.5 MB · Views: 93
  • IMG_5163.jpeg
    IMG_5163.jpeg
    2 MB · Views: 91
  • IMG_5161.jpeg
    6.5 MB · Views: 32
  • IMG_5160.jpeg
    IMG_5160.jpeg
    1.8 MB · Views: 95
  • IMG_5159.jpeg
    5.2 MB · Views: 31
  • IMG_5157.jpeg
    IMG_5157.jpeg
    1.6 MB · Views: 93
  • IMG_5153.jpeg
    IMG_5153.jpeg
    2.2 MB · Views: 90
  • IMG_5152.jpeg
    IMG_5152.jpeg
    2.9 MB · Views: 89
  • IMG_5156.jpeg
    IMG_5156.jpeg
    1.9 MB · Views: 88

Ruger American AICS mag conversion trouble

Hey guys, a long time ago Ruger sent me the new style two-piece stock for my gen 1 Ruger American predator 308. I had a lot of life happen since then and I'm just getting around to putting it all together. The reason they sent it to me is because I called with trouble with my original rotary magazine. The spring wore out which sounds like it's common, so I bought the upgraded single stack one and it never clicked in my old stock. So I called them and asked about it and they sent me this stuff. That's the background.

Now I have it all installed, but I'll be darned if I'm not having the same problem. The magazine won't click in. Actually it will if I push ridiculously hard using two hands, but you get the idea. This is with a 10 round Magpul. I tried my Gen 2, 6.5 Creedmoor factory Ruger five round magazine and the same thing. Worse actually, I never couldn't get it to click in.

Has anybody else ran into this?

Also it seems like I'm only a couple threads into my action bolts now. Was l supposed to receive longer ones?

SOLD Geissele Super 700 trigger

Saved this trigger for a somewhat like MK13 build. It's like new condition. Purchased new from Geissele.

$400 shipped with insurance.

Message me first. I will not message you. Can talk over the phone or text if you would like.

Attachments

  • PXL_20250426_203442505.jpg
    PXL_20250426_203442505.jpg
    3.6 MB · Views: 52
  • PXL_20250426_203449706.jpg
    PXL_20250426_203449706.jpg
    3.5 MB · Views: 47

SOLD Leupold Rx-2800 TBR/W Rangefinder

Selling a used but great condition Leupold RX-2800 TBR/W rangefinder. Comes with original box and paperwork. Asking $225 tyd.

Attachments

  • IMG_1020.jpeg
    IMG_1020.jpeg
    158.3 KB · Views: 43
  • IMG_1021.jpeg
    IMG_1021.jpeg
    149.3 KB · Views: 30
  • IMG_1022.jpeg
    IMG_1022.jpeg
    153.6 KB · Views: 27
  • IMG_1023.jpeg
    IMG_1023.jpeg
    135.8 KB · Views: 29
  • IMG_1024.jpeg
    IMG_1024.jpeg
    140.3 KB · Views: 29
  • IMG_1025.jpeg
    IMG_1025.jpeg
    164.9 KB · Views: 32

Sierra Precision Grip Mod

The Sierra Precision Grip is probably my favorite grip for a precision AR but one of the drawbacks is that the inside of the grip is hollow and it's weirdly shaped so there were really no options for storage. I decided to do something about that so I brainstormed some ideas and what I came up with was to cannibalize a grip that did have storage and figure out a way to graft that on to the SPR grip.

I had a Magpul K2 XL that I ended up not really liking much so it became the sacrifice for this project so I started hacking and basically left myself with this relatively small portion, basically the latch recess and "strut guide".

MAG1165_Feature_Magpul_MOE_K2-XL_Grip_03.jpg

The remainder piece was still too wide to fit so I had to whittle it down and hog out some of the interior of the SPR grip using everyone's favorite tool, a Dremel.

Once I got it to the point the door was flush with the bottom I held it in place with a couple dots of super glue so I could prep it for epoxy.

SPR Grip Bottom.jpg


I'll need to clean up the excess tomorrow so it's flush with the bottom and maybe splash it with some paint for touch up.

SPR Grip Bottom Plate.jpg

Attachments

  • 1745466885955.jpeg
    1745466885955.jpeg
    908.3 KB · Views: 56

Accessories Miscellaneous Accessories

-Silencer co ASR break 1/2x28 and Bravo hub mount $150 for both
- Geissele mount lower 1/3 aimpoint t2 footprint $100
- Troy Breacher tooth 1/2x28 thread
- Larue MBT trigger $100
- EGW 30mm rings-$100

All prices OBO, buyer pays shipping

Attachments

  • IMG_4133.jpeg
    IMG_4133.jpeg
    2.1 MB · Views: 56
  • IMG_4135.jpeg
    IMG_4135.jpeg
    2.2 MB · Views: 50
  • IMG_4136.jpeg
    IMG_4136.jpeg
    2.1 MB · Views: 44
  • IMG_4137.jpeg
    IMG_4137.jpeg
    1.8 MB · Views: 41
  • IMG_4138.jpeg
    IMG_4138.jpeg
    1.8 MB · Views: 41
  • IMG_4139.jpeg
    IMG_4139.jpeg
    1.9 MB · Views: 44
  • IMG_4140.jpeg
    IMG_4140.jpeg
    2.5 MB · Views: 45
  • IMG_4142.jpeg
    IMG_4142.jpeg
    4 MB · Views: 48
  • IMG_4141.jpeg
    IMG_4141.jpeg
    2.1 MB · Views: 47
  • IMG_4143.jpeg
    IMG_4143.jpeg
    2.6 MB · Views: 46
  • IMG_4144.jpeg
    IMG_4144.jpeg
    2.1 MB · Views: 50

SOLD Sig Sauer P320 AXG Legion 4/5 Price Drop

Sig Sauer P320 AXG Legion aluminum grip frame
2 additional Sig Legion magazines - (5 total)
Sig Legion range bag and coin
Original Case & paperwork
Only a few months old, in pristine condition

$975

Will ship from my local FFL (I’m in Iowa) to your FFL (please provide that FFL name and address). Will accept USPS money orders or discreet electronic forms of payment.
IMG_0666.jpeg

Attachments

  • IMG_0667.jpeg
    IMG_0667.jpeg
    1.4 MB · Views: 52
  • IMG_0679.png
    IMG_0679.png
    13.3 MB · Views: 53
  • IMG_0680.png
    IMG_0680.png
    11.4 MB · Views: 54

SAC sizer die setup?

Have a question on my new sac sizing die. Got it setup like the sac sizing die setup video says. Got the decapping expander mandrel in it with a .288 bushing for my 6.5 Creedmoor. The bushing edge (facing the decapping end) is lined up about even with the top end of the expander section (closest to top of die). It sizes with extremely good neck runout (0.0005 to 0.001). However, the shoulder bump seems inconsistent (ranging from 0.000 to 0.002 bump.
Other question I have is it drags pretty hard as the brass is coming back thru the mandrel. It is not smooth. It is jerky and almost squeaks. I use plenty of Imperial Die wax inside and outside neck and on body.
Got suggestions for me?

Seems like this will be the bell weather case in the fake DUI arrests

Login to view embedded media
Just a refresher- not the first of the nation wide DUI for profit arrests but one of the first ones to work its way through the Justice industry .

Kids life has been fucked up since 2022 over this fucking bullshit .
Now his charges have been dropped and the pigs that did this stripped of qualified immunity.

License temporary suspension, fucked up his scholarships , cost employment and I can’t imagine what his legal bills have been the last 3 years .

So some pigs can get free pizza of gift cards for hitting that quota

Scale drift issues

I have an old Lyman 500 and a rcbs digital scale. I was loading some 308 yesterday, and the rcbs was being a pain in the ass. So I checked it against the Lyman, and it was consistently 0.2 high. It would read 44.9 when the Lyman beam would read 44.7. Unfortunately the check weights that came with the RCBS 50grams and the Lyman only goes to 505. So I finished reloading using the beam and left the rcbs on all night. Went into my loading room this am, and zeroed both out, dumped 0.2 into the Lyman pan, then dumped that powder into the rcbs and it would not even read the 0.2. Upped it to 0.4 on the Lyman and then into the rcbs and it read 0.3. Is the rcbs unit faulty? I really want an electric dispenser for my precision rounds, but now I am nervous about getting one. Any suggestions?

Optics FS: AGM StingIR 640 (sold )

(SOLD) Like new AGM StingIR 640 Thermal. This can be used a scope, clip-on, helmet mounted, or handheld. The unit is in perfect condition and barely used. 3,000 shipped, OBO.
Happy to answer any thermal questions.

Attachments

  • StingIR 640 1 .jpg
    StingIR 640 1 .jpg
    2.2 MB · Views: 47
  • StingIR 640 2 .jpg
    StingIR 640 2 .jpg
    2.1 MB · Views: 46
  • StingIR 640 3 .jpg
    StingIR 640 3 .jpg
    2 MB · Views: 39
  • StingIR 640 4 .jpg
    StingIR 640 4 .jpg
    1.2 MB · Views: 53