Wanting to sell my Master Piece Arms BA Comp Chassis for a left hand Tikka T3/T3X. It has been spray painted as you can see but is in good shape. Comes with a Wiebad Gear Mini Stock Pad, Triad Tactical Skid Plate, 2 Round Holder, ARCA/Picatinny Aluminum Spigot Mount, Picatinny Side Rail Section, and Bag Rider.

Great chassis system but Im wanting to try out a McMillan ELR Hunter is my only reason for selling it. Looking to get $800 out of it. Paid $1100 for it a year ago. I have shipping and insurance covered. Thanks.

In search of 2 ARC CDG actions. Looking for the original price of 899 and wondering if anyone has one or two sitting on a shelf they still haven’t sold or are wanting to move. Used is fine as well.

I’m happy to pay or trade gunamithing services or a combination of the two.

I can get you plenty of references.

Thanks.

Colt LE6943CK 11.5" 5.56 NATO Monolithic Complete Upper with gas-block mounted front flip-up sight with bayonet lug, Colt BCG, and Colt CH, unknown round count, doesn't look too high, medium salt - $899 $799 shipped

Will not sell to any state with restrictions like CA, WA, NJ, IL, etc.

PP Friends and Family with No Notes and Zelle only. Thanks.

I have a 14.5 solgw broadsword upper w/13 in m89 handguard. In the upper is a 14.5 Noveske afgan barrel. This upper is brand new and unfired. This upper doesn’t come with bcg or charging handle. Asking 900 includes shipping. PayPal and Venmo is acceptable.

PM with what model you want and I’ll give you a Veterans Day price you will love! Thermals, NV, Clip ons you pick.

Has anyone had any time behind these new heavy profile Geissele barrel??

I just picked one up from Primary Arms with thier Halloween sale. They look to be the same profile as the barrels I custom order. Only thing I would have done differently is 5/8x24 threads and a intermediate gas length.

Have a box of 300 pieces of Peterson LRP 6 Creedmoor brass to move.
Asking $275 delivered to the lower 48

Hello , what do y’all think about the new
Vortex Razor Gen III 6-36x56 ?
Thoughts ?
Experiences? Fit and finish ? Clarity ?
Thanks

New in box DNT 7-35 in MIL.

$520 shipped

I know the general sentiment on here regarding the Burris thermals, but I have an opportunity to pick up one of the V3 640 scopes for about $2700. Optics Planet has them for $3500 currently. I do not currently own any thermal optics and have little experience with them. My intended use is to thin out the coyote population on my hunting land, which would likely consist of shots out to 250ish max. My question is, am I be better served to spend the same amount of money on a different optic, which would bump me down to 384 in most cases, or get the discounted 640 Burris?

Thanks

Man alive....gets you right in the "feels"

Login to view embedded media

Today I took out a new Tikka T3X CTR in 6.5 CM shooting for the first time and I have to say I'm really impressed. I was just using old hand loads (with varying powder charges working up in 0.3 grain increments) I had lying around for a different rifle. I labelled the groups in order. It seems the groups tightened up as I shot more. All groups are 5 shot groups at 100 yards. The average group size was 0.57 MOA and all groups were under 1 MOA. I can't wait to see how she shoots with a bit of load development.

The other cool thing is that the first group being low was a result of crudely boresighting the gun. I shot in the middle of 4 targets sheets to make sure I got on paper. Turns out, I was only 1 inch low on elevation (the point of aim was the red dot above the group) and dead on for windage. It doesn't get much better than that. It was probably pure luck, but I'll take it.

1. Do you measure distance to the lands everytime you swap bullets or once and done good enough?

2. I had a bunch of 212 grain eldx 30 cal bullets and 6.5mm sst given to me but some of them are tarnished, almost as if they were not kept in a climate controlled area there’s no rough spots on them or anything just a few discolored here and there. Are they good to run?

I also just wanted to say thank you to everyone on here who helped me on my reloading journey. I was brand new to this but was eager to learn so I read threw a few reloading manuals and reached out to a PRS buddy of mine and asked if I could watch him go threw his reloading process. I learned more in 30 minutes watching and talking with him than I did in any of those books.

Someone on here recommended I start with the 6.5 creedmoor as it’s easy to learn on so that’s what I did and here are some results. I know they’re 3 shot groups but this is coming out of a Ruger American with a thin barrel and I just didn’t want to waste components as I’m learning. I tweaked this load a little more and got SD down in the 4s keep in mind it’s a 22” barrel.

I figured maybe I just got lucky as that gun has always shot good for what it is so I started working on my older remmington 700 .270 that has hardly ever shot sub MOA and now that’s my most accurate deer rifle. A few pictures of the gun and results.



I’m sure there could be improvement but for my first reloads I was pretty happy and now I’m looking at expander mandrels and annealing to further increase precision. My simple reloading setup.

Triggertech Diamond with flat trigger for Rem700 or clones.

$225 SOLD

Nightforce NX8 2.5-20x50 FFP Mil-XT Riflescope C632
Great condition, switching up scopes on my DMR
Paypal F&F -sold

Let me know if you have any questions

So apparently I have an astigatism, haha... I have red dots on almost all my rifles (as offsets on bolt and offsets or primaries on gas guns) and pistols and have no issues using them effectively although the dot isn't necessarily super crisp (this is with quality red dots, Aimpoint Micros, Acros, PROs). I had only ever really used magnifiers with Eotechs (EXPS 3-2 and 3-4) and the dots although not perfectly crisp, were usable. Yesterday I tried a 6x Vortex magnifier behind my Aimpoint Pro and the dot was just a messy diagonal splotch...

Since I doubt that a higher end magnifier would make any difference, that got me to thinking about trying a 1x prism with a magnifier. When I look at Primary Arms' website, they say their 1x is compatible with their magnifier. Vortex however says that their 1x prism isn't compatible with their magnifier. Being that I don't imagine the "tech" is any different between those 2 brands (as they're just OEMing china stuff anyways) I was curious why one brand would say it's a go and another wouldn't. The only real issue I could imagine would potentially be eye relief so I'd be curious to hear from anyone who's tried this kind of setup. Is this a viable setup or am I better to just get an Eotech? Is there a reason that the dots are crisper with a holo like the Eotech than with red dot like an Aimpoint?

Leupold 56mm Alumina sunshade (fits MK5HD, MK4HD, VX-5, VX-6, etc)

New.

$45 shipped CONUS. No trades or haggling. Payment via Zelle, Venmo, or PayPal F&F.

Thanks.

So I was reading up on the Calypso and am trying to envision the end state. As an FNG to precision I'm attending my first NRL Hunter event (teamed with a good buddy) in April. I love being efficient (read "lazy"), we are spending lots of time on our workflow. The simpler and easier we can make work, the more time we have for the actually spotting and shooting, right?

So with the Calypso, you can feed the ABMobile app automagically and get your readings, which is wonderful. If you put it in relative wind mode, you can bolt it to the diving board of your rifle and have wind "built in" (I know, wind is tricky and what you feel may not be what is happening elsewhere). But, at least, it is something and very cool.

So now what I'm trying to figure out is how to integrate the LRF Binos. Because I'm in a team event, in a perfect world the spotter would find all four targets (or one target, or two targets, whatever), and then, as part of the workflow, laze the first target. This would then update my APMobile app with range (wind is already there as I'm pointing my rifle at it), and I've got my dope without having to check anything.

Are there LRF binos out there that can sync this way with AB Mobile (or some other app, preferably using the AB engine)?

Cheers!

Good afternoon Gents,


I'm looking to trade set for set for a pair of offset knights backup irons for my standard micro backups. I'm hoping someone can help a brother out.

If not, I'd be open to buying a set, but I'm not spending retail cash on them.

Questions can be sent to my DM's

Elcan has released a Fixed 4X version of their Elcan SpecterDR. It's called the Specter OS4X:


Thanks,

Mike @ CST

Have two lightly used 10rd and 1 new 12rd MDT metal AICS magazines for the 6mm ARC.

Asking $80 each shipped or $220 for all 3 shipped.

$150

Brand new in the box - Excellent 2-stage trigger. Extremely crisp break with a very short take-up and a short, tactile reset.

The Wilson TTU-M2 is probably the best kept secret in AR triggers. This is the upgraded version with the nitride coating on all the components.

Payment accepted via PayPal. UPS shipping included in the price.

$85

New in box - Precision Armament AFAB muzzle device. This is a super balanced brake with excellent recoil reduction, reduced side blast and very little flash.

Payment accepted via PayPal. UPS shipping included in price.

Zeroed on an 18 inch .223 and then kept in the safe. $450 shipped to your door.