Posts

Gunfighter14e2 · Jun 14, 2024

The lies never stop, especially at the very top. Yet we are supposed to toe the line, and the top lairs and law breakers get a pass?

https://www.breitbart.com/politics/...ce-agents-who-wished-each-other-a-safe-shift/

Gunfighter14e2 · Jun 14, 2024

West has declared war without rules on Russia Medvedev

There should be virtually no limits on how Moscow retaliates for the maximum damage the former president has argued Moscow should use e

www.bignewsnetwork.com

Subways as bunkers, one-meal plan as Germany prepares amid Russia war

Germany is bolstering its defence measures for the first time since World War II, in response to the threat to Europe from Russia. The country is implementing various strategies such as making bunkers out of subway stations, issuing one-time meals a day and mandatory military conscription.

www.indiatoday.in

Ukraine can strike Russian targets with Dutch F-16s

The Dutch position contrasts with Belgian policy, under which donated F-16s cannot be used by Kyiv to hit targets inside Russia.

www.politico.eu

Texas5517 · Jun 14, 2024

Why is it that I have over a dozen RMAs of scopes and lasers over the last three years because of faulty electronics? This is really getting out of hand. On my 4th or 5th RMA of an IFS scope and about the same number of returns of a TOR Fusion laser/light combo that is currently being worked on yet again. I have 3 or 4 of the TOR Fusions and not one of them has not had to be RMA’ed.

I have never had this much difficulty with any manufacturer ever. Everything I have purchased from them with a battery I have had to return.

I finally asked them to just refund me on the scope since they didn’t even bother to test it more than 5 seconds. It is still screwed after they sent it back ($25 worth of shipping later). Not sure how I could be more frustrated with a company I really wanted to like and puts out nice (non-electronic) scopes. Waiting for them to tell me to go pound sand on the refund which I fully expect given their lack of interest in fixing their products.

Prison Mike · Jun 14, 2024

This first photo is from a different rifle with very similar specs just to establish a baseline of my load/shooting capability. From left to right is 40.0, 40.1, and 40.2. As you can see 40.2 is the clear winner here.

Now here is are the groups from the second rifle. First thing I’m noticing is there seems to be a lot of single shots that don’t group (circled in red). But also the tightest grouping I’m seeing is 0.69 - 0.79. These are all custom parts from custom manufacturers so sub half moa groups should be obtainable like in the first photo.

This target was from today after I identified a powder charge I thought the barrel liked (39.8).

It liked 41.3 but as you can see there was another inconsistent shot. So my question is should I:

A) stick with 41.3 and play with seating depth
B) change bullet grain and re-do powder charges or;
C) reload the charges and go shoot the same test.

Just looking for a little help on taming this 18” barrel.

FP-4 · Mar 18, 2024

Steiner c35 thermal
Used about 4 times
Excellent condition
Comes with 3 batteries and charger
$
Sold

alamo5000 · Apr 9, 2024

I have a number of AR500 steel plates hanging up behind my house. They have been there for years and years with the same original T-post. A few months ago some relatives came over to shoot which was totally fine. After they were done, a few days later I noticed that they shot through and blew the main support out of some of the posts.

I was considering re-arranging everything anyway, so I pulled up each post and re-mounted everything with different mounting attachment methods. Did that and everything looked great. Then the same two came over to shoot again and low and behold they shot up the brand new T-posts AGAIN. In probably ten years I never shot the posts holding up my targets. They can't hit anything AR500 worth a crap, but they certainly can hit the T-posts from various distances.

The net result is, I am going to have to pull up several posts (again) and replace them, which leads to my asking the brain trust here to give me some ideas about how to protect the T-posts. It's not that posts are expensive, but rather, it's a pain in the ass to go pull them up out of the ground and re-mount my targets all the time.

I have seen a number of companies that sell AR500 T-post protectors. The problem is they are expensive. In some cases from the prices I see it would cost several hundred bucks to protect a few fence posts, (which I might do anyway under the premise of 'buy once cry once') but I am not totally sold yet. The other problem is that the targets are at various heights so initially I might have to change some of that up if I go that route. It will also limit me in the future should I decide to switch things up again because I don't have the stuff to cut AR500 to custom lengths. There are a few other downsides as well such as (supposedly) I would need to use their mounting solutions as well, which is even more $$$.

One idea that popped into my head is to get some treated 4x4 lumber and cut it to the length I like with a chainsaw and just bolt it on the post below the target. I have zero illusions that a 4x4 would stop any kind of rifle bullet, but maybe it could slow things down enough to prevent damage to the post behind it. Typically no one is shooting any larger calibers anymore so generally speaking we are talking about 5.56 or 300BLK (AR cartridges) and pistol rounds.

If anyone has any ideas to accomplish my goal please let me know by posting it up below. After I get a few ideas and weigh my options I will purchase what I need.

kc7pwx · Jun 14, 2024

Has anyone put a Ruger 10-22 with a Gemtech Mist-22 barrel in a Luth-AR MCA-22 chassis?
I talked to them and they sent me a file showing where to trim the chassis to make the barrel fit so I know it fits but they were not sure if it is possible to remove the barrel/suppressor shroud from the gun without removing the gun from the chassis first.

Reaper 31 · Jun 14, 2024

I'm wondering if anyone has successfully changed the non adjustable cheek riser chassis to an adjustable with thumb wheels? I just picked up a used folding ultralite that has a fixed cheek piece and wanted to swap it out if I could. I see MPA has some spacers and a buttstock replacement kit I might be able to use but have to wait till Monday to call them directly about this.

Thank you.

AXMC · Mar 26, 2024

I've got a practically new Yankee Hill Machine Diamond Free Float Tube Quad Rail Handguard for DPMG G2
Would pair well with the bull barrel I also have listed.
Asking $75
PM if interested
Thanks

Marcelog10 · Feb 26, 2024

Selling my MPA BA PMR Pro Rifle. Roughly 250 rounds through it. $3,750 but i am open to offers (No Trades). Shoots 1/4 MOA with Sierra Match King 168gr. Buyer covers shipping

MPA BA PMR Pro - Caliber 308
MPA Scope Mount
Vortex Razor Gen II 4.5x27 (with lens covers) MOA
Trigger Tech
Harris Bi-Pod with Arca Rail Adaptor
American Rifle Company 308 Magazine + Magpul 308 magazine

DRWilson · Jun 12, 2024

PRICE DROP: $320 shipped with all original packaging. I have an EOTech holographic red dot that I no longer need. Never been dropped and has just been on an indoor range gun. Great condition and I have the original box. Thank you!

Gunfighter14e2 · Jun 13, 2024

https://www.breitbart.com/politics/2024/06/12/bidens-department-of-justice-says-ag-merrick-garland-immune-from-prosecution-for-contempt-of-congress/

Mike173 · Jun 14, 2024

NX8
4-32
MIL-XT

Mounted on a Geissele 6mm ARC, zeroed and haven’t had time to shoot it.

$1800 shipped

No trades

Bluedog82 · Jun 2, 2024

Login to view embedded media
First off yes, F the FBI. With that out of the way, the HRT rifle is a pretty sweet little shooter. Mine is far from 100% clone correct, but the Geissele Mk4 Federal rail is the real centerpiece I think. Anyone else have one? What clones do you guys have?

mi650 · Jun 14, 2024

FFP, illuminated. Excellent condition, aside from a small spot from rings, shown in pic.

Glass is like new.

Spot.

Ships in original box with accessories.

$825 shipped CONUS. Prefer DISCRETE PP F&F, open to some other options.

Prsshooter25 · Apr 25, 2024

I’ve got two tier one scope mounts laying around that I’m trying to sell.

1. 30mm long saddle monomount. Like new condition (other than a couple sharpie witness marks). 0 MOA, 1.18”. Comes with box.

$275

2. 34mm short saddle monomount. Like new. 0 MOA, 1.5”. No box.

$250

Shipping included in price.

Prsshooter25 · Apr 25, 2024

I’ve got two tier one scope mounts laying around that I’m trying to sell.

1. 30mm long saddle monomount. Like new condition (other than a couple sharpie witness marks). 0 MOA, 1.18”. Comes with box.

$275

2. 34mm short saddle monomount. Like new. 0 MOA, 1.5”. No box.

$250

Shipping included in price.

FloridaMarine · Jun 14, 2024

Hey, all. I’m trying to get info regarding which barrels were used during the era of the M40A3. I’ve tried to hopefully find some kind of compiled list showing which brands they used and when but I cannot find this exact info. The M40A3 used Krieger Barrels?

CEO10KaDAY · Jun 13, 2024

Hey guys I’ve been trying to research this myself but Im not getting anywhere.

Can someone recommend me a place where I can buy one of them nifty little temperature gauged ammo boxes?

I’m loading 338 LM and its beyond salami spec OAL and won’t fit into any box I have so I was going to use this as a good excuse to upgrade to what the pros are using. Thanks.

Fitz · Jun 14, 2024

Hello, am looking to sell a rifle which has just been sitting in the safe. It is built on an ARC Nucleus 1.1 in an Xylo chassis.

Here is the lowdown.
ARC Nucleus Gen 1.1 action .378 bolt face installed.
ARC XYLO chassis
K&P barrel 1-7.75 twist .223 chamber throated for Berger 85.5 long range hybrid.
Barrel chambered by Chad Dixon at Long Rifles Inc
Trigger Tech Primary trigger
2 MDT magazines. Work flawless
.473 bolt head
Including an Area 419 barricade stop as well.
Bipod not included but available for $125.

The rifle is in great shape with only about 200 or so rounds down the pipe from the previous owner.

Local pickup in the Houston area can be arranged. Shipping and ins included at my asking price. Payment via the usual electronic methods with Zelle being preferred. Check out my feedback and you’ll see I don’t BS. Not interested in trades at the moment.

$1650 delivered. - SPF

saddlerocker · May 31, 2024

Does this look like an end cap strike, and would it effect accuracy?

Hard to get a good picture, but I noticed a small divot at 12 O'clock on the end cap.
I cleaned it up with a scraper and some q tips to removed carbon and it appears it is a divot.
Not sure if those are cracks or scratches from the scraper, but I think cracks since they are only near the anomaly.

Any opinions or insite is appriciated.
Thanks

BoulderE89 · Jun 12, 2024

I have an ARMS 17S mounted Thunderbeast bipod with adm pic clamp I am selling for $360 shipped! In great shape with no cosmetic issues

Clob McStrunk · Jun 14, 2024

Leupold standard one-piece bases. These were in a big ol box of shop clean out stuff, they could be a year old, they could be 15 years old. There may be a screw missing but havent looked close enough to confirm. I think they list around $35-40 these days, so the $25 price tag on them may mean they're vintage, which would totally make them worth a lot more. Of course. Or...be good basis for an "inflation in the gun industry" discussion.

(2) 55705 - Savage 110, right hand, long action, silver
(2) 50161 - Remington 700, right hand, short action, silver
(1) 50007 - Remington 700, left hand, long action, matte

$25each, shipped

Or if someone wants all five, $100 shipped.

Or trade for something cool. Actually, that'd be the best option

cpk357sig · Apr 23, 2024

Sig Tango 6 5-30x56 Scope MOA milling Reticle scope for sale, Badger medium 34 mm rings and 3 Aadmount flip up scope covers. I'm having trouble using this scope since I had a stroke. Scope was mounted to Badger torque specs, no tube dents, glass is as new, Level Plex and illuminated reticle work as new. $1250.00

holy cow · Jun 14, 2024

I bought this rifle not long ago off this forum from the original owner. I was going to keep the barreled action and sell the stock as I have another stock that is a more traditional hunting stock. Decided to sell it complete as i have a new GA Precision 6.5 SAUM built by them and do not want to invest in another caliber and all that goes along with it.

From the previous ad the fellow had this built and he, his father and brother shot the rifle when new and put 30 rounds down the pipe. Rifle had been put away for some time and he ended up sending it out to the fellow who does all of Noveske cerakote work and had him cerakote the entire rifle in the pattern shown in the pictures. It has never been shot after that or by me. Still 30 rounds fired through rifle. Here is a breakdown on the rifle.

Manners T5A with GEN1 mini chassis
Butt spacers for length of pull
2 flush cup left side
Bottom front tapped with screws for pick rail
Terry Cross hardware used on adjustable cheek
Bartlein 5r barrel Sendero profile 22 inches 8 twist 6.5 Creedmoor
Threaded 5/8×24 with thread protector
Remington 700 action blueprinted and trued by Long Rifles Inc. A starts at beginning of serial number
Bolt fluted and bolt knob installed
1 5rd IA magazine
Original trigger
Badger pic rail and Badger recoil lug
Barrel channel will accommodate a large profile barrel.
Stock and barreled action cerakoted by Off The Grid which is the official Noveske cerakote shop

Any questions ask, I will do my best
Sale is to your FFL from private owner
Excellent deal here, priced to sell.

2250.00 ad 45.00.for shipping and insurance. I won't send it uninsured.

Having trouble using the site?

Posts

Posts

Filter

Precision Rifle Gear Why can’t Steiner build anything that requires a battery?

SOLD Steiner c35 thermal

Attachments

SOLD Yankee Hill Machine Diamond Free Float Tube Quad Rail Handguard for DPMS G2 PRICE DROP 6/14

Attachments

Firearms Masterpiece Arms BA PMR Pro Rifle w/ Vortex Razor Gen II FOR SALE

Attachments

SOLD Eotech XPS2 300BLK

Attachments

SOLD NX8 4-32 MIL-XT

SOLD Meopta Optika6 5-30x56 MRAD

Accessories WTS Tier One scope mounts

Attachments

Optics WTS Tier One Scope Mounts

Attachments

SOLD American Rifle Co Nucleus 1.1 / Xylo chassis / LRI Barrel chambered in .223- $1650

SOLD TBAC Bipod

Optics Multiple Leupold one-piece standard scope bases

Attachments

Optics Sig Tango 6 5-30x56 Scope MOA milling Reticle scope for sale

Attachments

SOLD Long Rifles Inc. precision rifle 6.5 Creedmoor

Attachments