Got a set of ARC M10 rings for sale. They are 34mm 1.1 inch height 115 shipped and insured to the lower 48 PayPal or Venmo

Just happened a helicopter hit a jet near DC and they went into the Patomic.The heli was a blackhawk.

I'm working up an elr load and possibly a long range hunting load. It's a 28in 300norma shooting the 225gr eldm. The barrel is fast, brass and powder are allowing for a very good load at approx 3100fps. I know it's not necessary, let's not debate that. The question on hand is whether or not the 225 will survive at that speed. I've personally seen the 230gr atip come apart at at far less speed, so I'm wary. I want the performance that the cartridge is capable of, and that bullet gives it at that speed. Has anyone run the 225 that fast for long?

Like new LEFT HAND Rim-X. Serial Number is in the 900s. Currently has a 20" Proof Carbon barrel installed. Roughly 250 rounds on both. I also have a 20" Proof SS Comp Contour that is new. One mag included.

Rim-X w/ Carbon barrel $1850 shipped to FFL
Rim-X w/ SS barrel $1550 shipped to FFL
Rim-X w/ both barrels $2250 shipped to FFL

Have a couple new units, opened for measurements and inspection otherwise new . 1 ea Rh25 v2 640 4250.00. - Rl25 v2 2250.00

Have some IR lights for sale. 1. Steiner SPIR long range IR 525.00 - 2. stream light super tac ir 75.00 - 3. Armasight original IR light 75.00 - Armasight long range IR light 125.0

Selling my trg-42 chambered in 338 LM. Hate to sell this one but I need the funds for another project. Rifle is a post 13 model with the 10 twist. Has ~ 500 rounds through it. Bolt shows some wear from being cycled. Overall in excellent shape, besides a small scratch on the barrel. Scope is not included. Can mix/match accessories with adjusted price, but youll get a better deal if you buy it all.

-Included with rifle-
Spuhr ST-4701
Asr brake, as well as an apa brake.
Rcbs matchmaster dies
Extra cheek spacers
TRG bipod
Pelican 1750

***SOLD***

Looking for info, advice, and real life experiences.
Factory or readily available semi-custom

Debating between Fierce or Horizon
In 22CM with barrel length 16.5", 18" or 20".
If you know of semi-custom or custom but dont know of any available

*Not wanting advice on caliber or barrel length.

Thanks in advance for your help

I have several muzzle part i need to sell. let me know what you need and well work something out View attachment IMG_8453.jpg
View attachment IMG_8454.jpg

Restocking rarer calibers:

Norma 284 Win Brass: $74.95 / 50 ct

Norma 460 Wby Mag: $109.95 / 25 ct

Norma 500 Jeffery: $119.95 / 25 ct

Norma 6.5 Japanese: $59.95 / 50 ct

Norma 375 Flanged Magnum Nitro Express: $139 / 50 ct

More good stuff coming soon. 300 Norma Mag is still 60% off as well:

Vortex Gen 3 Razor 6-36 in mils. Includes turret spacer and sun shade. No box or throw lever.

Badger C1 Max Mount 34mm 1.3 with the level, data card and diving board set up

Package price SOLD

Vortex Gen 3 Razor 1-10 in mils includes everything in the box. Never mounted $1750

Reptilia 34mm 1.54 mount $230

Package price SOLD

Will not sell mounts before scopes. Possible partial trades on the following:
36mm badger mounts
MK5 3.6-18/2-10 with PR2/CMR reticles
LMT MWS 12.5 M-lok upper

50% off from Leofoto

$100 and its yours

Mlok attachment, no hardware, $50 shipped

Steiner M5 military 5-25 with a great reticie MSR. MIL open turrets CCW = Counterclockwise for +UP elevation dial. 34mm tube. Great shape overall, superficial light marks on turret sharp edges here and there. Perfect glass, bell, bottom of bell, Tiny scratch near ring area shown. Only disclosure, thin O-ring for battery cap is torn. The cap is on tight so you don't spin it off for the Illumination control. I created a ticket with Steiner online for replacements. My local hardware store did not have a thin enough o-ring and I looked through a bunch. $1600 shipped. Retail is pretty crazy on these right now

And the Iranians blew themselves up again…

Solid rocket fuel storage/manufacture is best guess.

What a shame!

Should have painted the roof blue….

Sirhr

Looking to get into it just for myself friends and family. As the title says looking for decent cheaper equipment to get going. Probably will run the air dry over oven baked to start.

Pending sale: ZCO 527 with the MPCT 3 retical it also has 15mil locking elevation turret. Scope is in box with flip caps, scope chap, and is mounted in a SPHUR SR-6002 one piece mount. Modding is the baggy with the Velcro patch, sticker and slot driver ( I bought this used and didn’t get them). Also in the box is something called a 55-DFAT-HD which I guess a dry fire simulator? Will not split, price is $3300 PayPal F/F shipped lower 48.

I see there are other misc truck threads running, so hopefully this isn't too repetitive.

I have always owned a Toyota truck or SUV so I have no allegiance to any of the major truck brands. I am looking for the best diesel truck for general use (driving to work, range, etc.) AND for hauling a 25-30ft camper trailer around the state and region. 4 door and front and rear bench seats are a must. It will be a squeeze but there will be times I need seats for 6. If and when I purchase it will be used. The major points I am looking for is reliability, price, and fuel economy. I have pulled a multitude of fully loaded work trailers with gas and diesel trucks and I have no interest in going with a gas truck. Especially in the mountains of Colorado I don't want to be struggling with a gas engine pulling a loaded camper over Vail Pass or wherever. I know certain generations of trucks have pros and cons, and brands as well, so if you have any words of wisdom please educate me! I would prefer a relatively new model with <50k miles.

Original EC Tuner with 1/2x28 adapter for sale. Used very little and in near new condition.
$185 shipped CONUS. PayPal FF only please. Happy to send a confirmation image that it is me selling the item.

Leupold Mark5HD

• 7-35x56
• PR2-Mil
• Lens Caps
• Sunshade
• Bone Spuhr throw lever
• Competition Dial and factory dial

Scope is lightly used. No scratches. Glass is pristine.
$OLD shipped

Sphur 5001 (1.18”) with Spuhr bubble level available if interested

$300 shipped

Gently used 10x32 OD Green LRF Binocular Class 1M
price drop to $695

SOLD $350 shipped CONUS.

Paypal or Venmo.

508 pieces of Alpha 25 GT brass that has been fired 2 times. It was resized and annealed once.

Trijicon Credo 2-10X36 FFP Mil. Glass is good. $850 tyd.

Along with the mounts from ICE.....

Here is another option for everyone. The first batch will be ready in 2 weeks.

I showed the mount to Marty at Badger and to George at GA Precision as well. They both liked it and said it looked great. George put a order in for 25pcs direct to the maker this week.

From the two I looked at... I'll say ring gap is .015". I grabbed a older 1" scope I have laying around and thru it in the rings and tightened the rings down to measure the ring gap. When I took the scope out of the rings nothing got crushed and only faint ring marks but no gouges etc... The only other scope I have that's a 1" anymore for the tube diameter is my Unertl and for me shooting my M40A1 I need the eye relief that the Badger scope base gives me and I'm using the M40A3 rings on it.

I took one of the mounts and test fit it to two receivers. I needed to take about .003" off each side of the rear lug and .030" off the backside of the rear lug. After doing it that it dropped on to a factory clip slotted 40x receiver. I needed to take a file and bevel the back corners of the rear lug to get it to go onto my GAP built M40A1 rifle and it fit pretty snug. A little snugger than the 40x.

Price on these will be $540 plus $11 shipping to the lower 48 states.

After this initial offering I will turn it all over to the manufacturer. Retail right now it's at $600.

No drop in mounts are available on these ones. No left handed mounts are available either from this maker.

Here are some pic's.

Later, Frank

Bought a Garmin so don’t use this anymore.

Looks like bullet grazed the top at some point but still functional. Includes cord and adapter for iPhone.

$60 shipped