Posts

JayjayUK · Dec 31, 2024

Anyone know of any NV Bridges that will mount to the Vision Hybrid Chassis' external MLOK slots?

I haven't got a set of calipers but I'm fairly certain the Hybrid is 1.5" wide.. so presumably any NV Bridge measuring 1.51" wide will work?

Just can't find that info on the XLR, Ultradyne or MPA NV Bridges...??

LRGoon · Dec 31, 2024

Two stage Timney trigger, R700 and clones, right hand, with bolt release. 130 shipped.

ToddM · Dec 31, 2024

So I was curious on people's thoughts about stock torsional stiffness and accuracy/repeatability?

For example, say you have your rifle on a bipod, and you exert a lateral or rotational force against the stock (say pushing against the cheek piece) if the forearm/stock deflects is that bad, or does it even matter? Seems like it might be a bigger issue (if it's even an issue) on a bipod than bags, as the rifle is allowed to twist on a bag that probably minimizes the torsion force but a locked down bipod isn't going to allow the mount point to move, so the stock twists.

One thing I've noticed is many stocks/chassis are pretty stiff vertically when you try and press the forearm to the barrel, which is the common test everyone seems to try, but some will twist quite easily, especially in stocks that do not have a full aluminum spine and just use a bedding block etc. I noticed this recently when I was setting up a new MDT Field Stock. It's quite stiff vertically when you try and compress it toward the barrel, but put it in a bipod and put just a couple pounds of pressure to either side of the cheek rest and was shocked how much twist there was. Obviously it's an extreme budget priced option, sacrifices have to be made at the price point, and it does not have a full aluminum spine. So for giggles I put a few other stocks/chassis I had into a bipod and the variation was pretty huge. Not surprising the higher price/weight/mass was usually more resistant to this force, but not always. I'd imagine a lot of factory plastic stocks would do horribly in this test as well.

AI AT: not surprisingly rock solid
TRG: again the only movement I could feel/see was bipod "slop"
CZ 457 bedded in a factory varmint precision chassis: I was surprised how much twist this one had, but it's also not very stiff vertically
10/22 in a bravo: I'd say middle of the pack
r700 in MDT field stock: by far the most flex, not even close
r700 bedded in HSS precision stock: pretty stiff, almost no movement
Sako s20: pretty solid middle of the pack.

Video Link

For my use, the low price of the MDT Field stock was not the main motivating factor, I wanted something under 4lbs, that had a "skin" not bare metal, was setup for detachable mags, had a vertical grip, and was not super bulky, but the amount of flex in the forearm seems concerning.

dirtytough · Sep 21, 2022

I was reading the Eotech thread and it sounds like XLR’s NV bridge is the wrong height for most 1.5” mounts/rings to line up your day scope and clip on perfectly.

Has anyone used the Element/Tikka/NV bridge combo? How far off was it if it was off? I would like to use an ARC mount but the max height I saw was 1.50”.

Regards, Branden

holdleftedge · Dec 31, 2024

WTS Accutac BR-4 G2 bipod with arca QD mount.
$250 shipped

Jabot · Dec 31, 2024

New
$old

Jabot · Dec 31, 2024

Cheek piece
Scope cover
Hrd arca rail
Mag block
Savage 17 hmr mag
Throw lever
2 bolt knobs
2 accu tac pic rails
Armageddon bra for a schmedium
Front rest block for a sled
Mdt rear recoil pad
2 sunshades don't know to what
Short arca for manners lrh
1 misc pic rail

Sold for it all to cover shipping
Not splitting it up

Duc · Dec 31, 2024

Nearly all of Puerto Rico is without power on New Year's Eve

A blackout has hit nearly all of Puerto Rico as the U.S. territory prepares to celebrate New Year’s.

apnews.com

“There’s a lot going on, like, I don’t know if you know this but there’s literally a floating island of garbage in the middle of the ocean right now. Yeah. I think it’s called Puerto Rico.”

David Lott · Nov 19, 2024

I received confirmation that if we commit to 10 left-hand actions Vudoo will make a run of them for us, I have a commitment for 2 so if interested please add your name to the list. THEY WILL NOT BE AVAILABLE AS ACTIONS ONLY,

1. DI Precision
2. DI Precision
3.
4.
5.
6.
7.
8.
9.
10.

Rteague77 · Sep 24, 2024

Have a brand new Howa 1500 in 300 win.

First 40 rounds down the barrel and 1/2 of them sticking in the chamber. Stuck so hard had to hit the bolt handle with my palm to get them to release. Ammo was off the shelf new rounds 180gn Federal hunting ammo, Chrome casings.

Got home cleaned the chamber, inspected chamber, no issues I can find. Had some once fired brass casings. Ran about 40 rds in and out to see if they would stick too. About 10 of them stuck but not as near as bad as on the range. Just had to jiggle the handle a little bit and they’d release. The brass ones that stuck were also hard to close the bolt. No issues with tightness in closing the bolt on the new rounds.

Wondering if it’s just because it’s so tight and new? But never had any other rifle act like this.

Thanks for any help!

vegashelipilot · Dec 31, 2024

FS: Triggertech Diamond
Single Stage
Black curved shoe
976 rounds logged, part of a rifle I'm parting out.

$215 shipped

Zelle or Venmo preferred

Krob95 · Dec 29, 2024

Selling a nice gently used TBAC bipod with claw feet and RRS BTC PRO arca pic. 415 shipped.

Erie660 · Dec 31, 2024

I bought a Tikka Superlite .243 in the TrueTimber VSX pattern and I’m considering Cerakote. Is it worth getting done or is it just personal preference? I’m waiting on my barrel from Thunderbeast that’s being threaded so I have time to decide. Thanks

Jabot · Dec 31, 2024

Never used

$50 each shipped

Hussell · Dec 27, 2024

The AI Mag is used and $55 shipped

Used BR Mag Sold
New BR Mag Sold

Paypal is preferred.
USPS with tracking

RPN · Apr 23, 2024

We don't have a hunting season as such in NZ - its on 365 days a year, so I'll start a 2024 thread with some of this year's deer.
Not much grin in the photos, I'm usually hunting alone

Jabot · Dec 31, 2024

Used them on a mdt
Don't know what tgere really for

$25 shipped for all 3

Namekagon · Dec 31, 2024

I have a question for anyone who has and uses an LIF on their NODs.

I understand that LIF's are designed to filter a very specific wavelength of IR to protect NODS from being trashed by high power military targeting lasers. As a side effect of that, they also filter out green visible light around 532nm.

I think this could be useful for hunting with others who have thermal, but not night vision, and need a light to see while walking. But as soon as someone dons a headlamp, anyone with NODs sees a bunch of shadows, flashing, blowback, etc. However, if the person using visible light was using a green light of 532nm, and the NOD wearers were using LIFs, theoretically the visible light wouldn't have an effect on the night vision because the filter would block it.

Is anyone doing this? Also, could someone who owns NODs with LIF and also owns a green LED torch see how well the LIF filters it? I suspect that the LEDs would be creating dirty green light of varying wavelength, and the filtered NODs would still see some of it. But how much? If its a significant reduction, it could still potentially be worth it.

Anyone with experience with this?

Jabot · Dec 31, 2024

It was for a short action magnum

Adjusted feedlips to work for my creedmore
Price reflects it

shipped

Hoggr · Nov 30, 2024

6.5 creedmoor lapua—
179 deprived and annealed
39 primed
180 shipped

If not stated. All brass is once fired. And shipped for the price listed

MtnGhost · Oct 18, 2024

This is an original Caswell CK3 from Caswell Knives. Probably one of the coolest looking knives ever made. The blade is flat black DLC (looks shiny in photos because I keep a light coat of food safe oil on it).

The grip insanely good. Between the shape and the G10 stippling, it sticks to the hand perfectly. Blade is made from a top-tier CPM-3V at 0.189" thick. This and the original run of the morphing karambit are highly sought after knives made and produced by Joe Caswell.

The Kydex sheath is the original factory sheath that's made for concealed carry inside of the waistband / IWB. These knives were designed and produced for FBI field agents, but they evidently couldn't produce them fast enough for them. Knife Center has a good write up on that along with the full specs of the knife here:

https://www.knifecenter.com/item/JCKCK3/caswell-knives-custom-ck-3-utility-fixed-black-cpm-3v-sheepsfoot-blade-g10-handles-iwb-kydex-sheath

Terms:
- Serious inquiries only. Not interested in trades
- $750 shipped CONUS

gr8fuldoug · Dec 31, 2024

Hawke Endurance ED 8x42 Binocular reduced from $309.99 to only $149.99

Happy New Year from us to you. This sale ends Midnight on January 1st. It's our New Years Super Saver Deal for you.

Hawke makes great optics. If you are not familiar with Hawke take a moment and familiarize yourself with them.

"From humble beginnings in our founder’s garage over 40 years ago, Hawke has become a world leader in sport optics. Headquartered in the United Kingdom with a presence in over 60 countries and expanding to the United States in 2007, we are still a family-run business today.
Our mission is to produce the finest precision optics available anywhere in the world. We do this with relentless dedication to quality and innovation. We start with the finest materials and the highest quality standards. Precision designs result in products with outstanding performance in the field. And our world class No Fault Lifetime Warranty will give you peace of mind in your purchase.
At Hawke our products represent our founder’s passion for placing a premium on quality, a dedication to value and devotion to customer service.
Once you’ve experienced Hawke you’ll understand what we mean when we say Vision Accomplished."

Hawke Endurance ED 8x42 Binocular reduced from $309.99 to only $149.99

Stunning optics providing crisp, clear and bright images with enhanced light transmission.
Endurance models benefit from our System H5 optics. ED glass is utilized to reduce color fringing. The Fully Multi-Coated lenses provide high resolution images which ensure no details are lost when viewing at distances down to 2m.
Effortless focusing and impressive depth of field makes these binoculars quick and easy to use. Water and fog proof with a high grip rubber coated body, Endurance is designed to battle the elements.
Extra-low Dispersion (ED) Glass
Phase Corrected
High resolution phase corrected BAK-4 roof prisms
Focus from 2m
Twist-up eye cups with position stops
Stay-on lens covers
Nitrogen purged. Waterproof. Fog proof.
Hawke No-Fault Lifetime Warranty.
Objective Lens 42mm
Magnification 8x
Optical System System H5
Field of View (°) 7.6
Eye Relief 0.7in
Exit Pupil 0.21″/ 5.3mm
Lens Coating Fully Multi-Coated
Field of View 399ft @1000YDS
Apparent Field of View (°) 61
Interpupillary Distance 2.2 - 3″ / 56 - 75mm
Close Focus 6.6ft
Prism Type Roof
Prism Glass BAK 4
Eye Cups Twist-Up
Eyecup ⌀ 1.7in / 43mm
Diopter Type Right Eye
Tripod Mounting Thread Yes (¼" - 20 UNC)
Height 5.8″
Width 4.3 - 5″
Weight 24.9oz

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

shootingnut · Nov 9, 2024

Just got laid off sale. Excellent clip on that has never given me issues on my coyote hunts.

Shown in the picatinny rail configuration but will also include all attachments to have it clamp directly on the objective bell of the scope. Comes with an external USB battery that, combined with the onboard battery, will last about 1 full night of hunting. Also comes with hard and soft case, all chargers, etc. Has just about 1 year left on the warranty, but I've heard common reports that Pulsar takes care of you after the warranty is over still. Have tons of video footage from coyote hunts, so just ask and I can send those over. Also have a bit of Triggercam footage through it, but that really doesn't do it justice. 100% functional, no issues with it at all.

Asking ~~$4100~~ shipped and insured, but OBO as I need this to move. Update: $2700

Jabot · Dec 31, 2024

like new
Used for 22 match once

$old

each shipped conus

Im2bent · Dec 7, 2024

Login to view embedded media

Having trouble using the site?

Contest: Show Us Your Winter Gear!

Posts

Posts

Filter

SOLD Timney two stage curved REM 700

Attachments

Night Vision XLR Element/Tikka/NV Bridge

SOLD Accutac BR-4 G2 Bipod

Attachments

SOLD Sold

SOLD Sold

Accessories Triggertech Diamond Curved

Attachments

SOLD TBAC Bipod

SOLD Sold

Accessories 10RD AI AICS Mag 308

Attachments

SOLD Sold

Night Vision LIF green filtering capabilities

SOLD Sold

Reloading Equipment Brass for sale

Knives RARE Caswell CK-3 Custom Fixed 3.75" Black CPM-3V Sheepsfoot Blade, G10 Handles, IWB Kydex Sheath

SOLD Pulsar Krypton FXG50 Thermal Clip-On

Attachments

SOLD Sold