Anybody got any time behind the NON LRF binos? Specifically, can anyone confirm if the reticle can be focused independently?

Why current milling binos do not have an independent reticle focus and with my aging eyes, the reticle is far from sharp.

Never used but put together. Ready to work. Includes bushing and decapping mandrel.

$395 Shipped

Looking for suggestions on powder and bullet weight for my k31. Any help would be great, thanks!

Have package deal on 2 Rails that I no longer use. 1 w/ stop studs has been used other barely even used. Maybe 2 times mounted. No hardware included.

$60 Shipped for both

Hey guys,

I’m looking for some help putting together a cold weather set up. For now just the clothing but other than what the google has to offer I really don’t know where to start beyond the basics. I live in the SE so the temperatures aren’t crazy but I’d like to be able to spend the night in the woods if necessary.

Thanks for the advice!

So to preface. I have a total of 5 TTs. Two Diamonds on my two custom actions, 2 specials on bighorns, and this special on the R700 on my XM3. Have never really experienced this, and unbeknownst to me until I sat down to practice dry firing last night and ran the bolt rather aggressively, was getting slamfires. Trigger is at 1ish lbs. Obviously the sear engagement can't be adjusted. I could get it safely at 2lbs, just much heavier than I'm used to. Though I could work with it, but I am curious if this has happened to anyone else with TT and an R700?

If this has happened to you what was the solution? I haven't really strayed from TT in years, part of me has half a mind to throw a diamond on it and set it o 1.5lbs.

I have a great MDT ACC Elite that comes with a lot of extras. I bought the chassis in 2024 and used it in quite a few matches, I have 3 of them so just thinning the heard for other options. Will ship it tyd for $1,500 PayPal Friends and Family or Venmo.

-(3) MDT Control Bridges
-(2) MDT Mlok Weights
-MDT One Piece Interior Weight
-MDT Elite Grip
-5x5 Precision Grip
-McLeod Precision Aluminum Bag Rider
-Hoz-N-Shield Bag Rider
-MDT Rubber Buttstock Dampners
-Gray Ops CNC Aluminum Mlok Thumbrest
-MDT Mlok LRA Mount
-OBI QD Post Mount

Pondering this with a couple of coworkers today, 7 people at work and little else to occupy our childish nature, it turned to what if scenarios. Seeing the entire DFW metroplex shutdown because of what might happen, we discussed essential gear and I brought up the things that you might not consider as important.

This came about because of the Pynch Pulley. I recently became aware of them reading a back country hunting thread somewhere. I had never considered something so small as being potentially useful in a survival/shtf scenario.

With this in mind, and a full understanding this may derail into a cluster.

What are some small items or gear would you consider useful or potentially useful to have in a bug out bag? Something that other's might not necessarily thing of.

I have been listening to the "Borrowed World" series on Audible. This is just one of many "apocalyptic type series I have in my library, most are pretty cookie cutter, color in the lines type.

I want to hear from those that think outside the box, @sirhrmechanic and his thread on his motorcycle trip and his "hatchet" carry, made reconsider this and that is one thing I want to add to my inventory. I just can't decide if I want a "camp" or "tomahawk" defense style.

Hi all, looking for some advice from those more experienced in long-range shooting and to an extent hunting as well. I recently built an Aero Precision M5E1 20" 6.5CM (price of build ~$2000, putting pricing for context later) in FDE that I've function checked but have not taken out to fully test. I also recently purchased a SCAR 20S in 6.5CM (also a 20" barrel) at a really stellar price of $2850 and no sales tax. I'm really looking to have two long range options, with one being a bolt, so selling one of the above gas rifles. The bolt would ideally be good to 800-1000yds and also be good for hunting, so I was thinking maybe also 6.5CM but not sure.

Question as I'm somewhat of a novice when it comes to long-distance shooting: if you were me, would you sell the Aero at a loss (maybe get $1400 for it) or the SCAR at a profit (probably could sell at $3500), and keep the other, and what would you recommend for bolt rifle? I'm familiar with Tikka, and I'd like to have just 1 bolt and 1 gas that can go long distance. I'm also familiar with 30 06 as a rifle round and certainly .308, but not as familiar with other hunting rounds. For brands I'm familiar with, they include Bergara, Savage and Remington, amongst others and Tikka. Probably looking in the $1k-$2k price range, really just want good value for the money (price obviously not inclusive of glass). All advice welcome and appreciated, thank you.

Is RKB Armory still buying rifle scopes I have sent them a couple of emails with no response.

I’ve seen a few posts about Peterson offering 416 Barrett brass some time in ‘25. Does anyone have any more information regarding when?

Best “match” reamer and dies to use with it?

Login to view embedded media

It only took 12 of them to figure out that it was the wrong guy .

But Because they are retarded they did threaten to shoot him in the face .
And want qualified immunity to be invoked so they don’t get sued .
Fucking retards

For those of you following the threads I said I’d post a wrong house wrong cat wrong person thread every week this year . So far it hasn’t been hard to find a good example.

New MDT Vertical grip premier in FDE. Only opened box to ensure contents. $45 shipped.

MPA DN3 6.5mm $100 shipped

Came with the MPA rifles I ordered long time ago, switched to Area419 6mm break. Whatever the shots MPA tested it with, otherwise like new

26” Christensen arms ridgeline barrel chambered in 7mm Rem Mag.
$500

Interesting find this morning. What are anyone’s thoughts? I know the sheer amount of consolidation across the industry into a handful of companies and/or conglomerates has strong opinions associated with it. I’ve never bought Ammo Inc’s ammo but I will say that I never buy any of Winchester’s ammo that’s for sure….

That’s a .pdf below too so you’re aware.

looking for a carbon lightweight prefit in 223 for an origin/TL3/Solus action. Looking for 16, 18, or 20”. The shorter the better. Trying to build a very lightweight build for my kids since the 22LR isn’t cutting it anymore so the shorter the better. Looking for the shouldered version and not the barrel nut savage style.

Due to a few really good deals i am deciding between two options for optics and looking for opinions, thanks for any help.
option 1 -- Leupold mark 4 3.5-18 pr2 reticle
option 2 -- Leupold mark 4 6-24 pr3 reticle

My few thoughts are i prefer the pr3 reticle and I have a small concern on the 6 power on the low end.
I cant get the pr3 in the 3.5-18 as far as I see

Mounting on gas AR in 223 wylde
Thanks again

Now available the new RAPTAR-Xe High Power is now available.

The Wilcox RAPTAR Xe™ is the next generation in the RAPTAR line of products. As a class 3B high power laser aiming device, the RAPTAR Xe is designed specifically for the military and law enforcement markets. The RAPTAR Xe provides snipers and advanced tactical shooters increased accuracy and precise engagement of targets at extremely long ranges.

Compared to it's predecessor, the RAPTAR Xe is a smaller, lighter, and stronger laser aiming device which significantly increases first-round hit capability. The built-in networking capabilities and user interface give the RAPTAR Xe superior maintenance and replenishment connectivity with key auxiliary devices. These leading-edge features increase the operator's lethality and situational awareness.

Applied Ballistics Elite Engine Onboard with Free companion App.

FEATURES AND BENEFITS

• One optical bench houses the red VIS laser,
  NIR laser, variable NIR Illuminator, and LRF
• NIR VCSEL illuminator projects precise, speckle-free beams for extreme clarity and optimal combat identification
• The product is aligned to the weapon by one windage and one elevation adjustment
• Powered by one (1) CR123 3V battery
• Mounts to any 1913 Picatinny rail secured by
  2 shock nuts
• Multi-function remote keypads provide flexibility in programing custom options
• Auto display brightness
• On-board ballistic computer measures temperature,
  pressure, humidity, inclination, cant and heading. Wind speed and direction may be entered manually or via Bluetooth to calculate the ballistic solution
• Large OLED display outputs ballistic solution in MIL, MOA & INCHES

Have a lightly used bergara b14 premier in 6.5 prc I'm looking to sell or trade. It has around 80 round thru it and shoots right at .5 moa with 147gr hornady match. Would sell it in either the mpa ultralight chassis or original stock. Scope, rings, suppressor, and sling not included.
In mpa-$1700 shipped
In stock-$1250 shipped
Bergara stock w/dbm-$325 shipped

Vortex Viper PST 1-6 with vortex mount-$500

Selling my Altus build.

Nothing wrong with the rifle but the tacops bug has latched onto me.

Each barrel has under 100 rounds on it. I will post groups for each barrel.


20 in Proof CF 308 w/APA gen 2

20 in SPR bartlein 6.5 Creed w/Area 419 match

26 in Stutesville 6GT with APA gen 2


For the entire rifle package + barrels(308,6GT,6.5 creed) $5,000 from my FFL to your FFL.

For the rifle only (Proof CF 308), $3,800 from my FFL to your FFL.

Split up Prices:
1. Impact 737R S/A, 90* Bolt. $1200
2. Proof 308 CF, 20 in, with APA Gen 2 Brake. $850
3. Stutesville 6GT, 26in, with APA gen 3 Brake. $700
4. Bart 6.5 Creedmoor, 20in, with Area 419 match Brake. $700 $650
5. Manners PRS1T, back in clack color scheme, Badger EFR, Pic and Arca rail, *bedded for impact 737R. $1250. $1150
6. Trigger Tech special, 2 stage, $150

For the groups posted below, the 308 was 175 FGMM, 6.5 was 143 eldx factory, and the 6 was hand loads.

PayPal FF.

I have 100s of 100% feedback on Ar15.com and AKfiles . Just ask to see screens .

Electronic payment of zelle is preferred. But can take a postal money order or PayPal gift no notes .

Unfired . Been sitting in the safe . As new but the actions has been manipulated by me . The stock came with a color blemish on the base below the pistol grip . I installed a new area 419 improved bipod pic rail . I installed new mdt 34mm scope rings on it . So expect so see some minor marks but unfired condition. This is a AICS system and works with 10 round AICS magazines .

$1650 now $1575 $1475 firm shipped from FFL to FFL Conus .

I am now including a new ssa-e geissele trigger now to the buyer.


That price includes the 419 rail and an extra amend2 aics magazine.

If you want the 34mm mdt rings

MDT 103548BLK SCP RINGS PREMIER 34MM MED 1IN Blk

Add another $85

Scope/bipod not included

This is a redline . Not a waypoint


Exact sku is

BAT92065CMCFGC

CALIBER
6.5 Creedmoor
COLOR
Olive w/ Black Webbing
BARREL
20" Carbon Fiber, Threaded (5/8x24), 1:8
RECEIVER
Model 2020 Stainless Steel, Mil-Spec Green Cerakote® H-264
OPTIC MOUNTING
Picatinny Mount, Rem 700 SA Pattern, 6-48 Screws
BOLT
Fluted 4140 Tool Steel, Nitride
STOCK
Grayboe Trekker, Olive w/ Black Webbing
TRIGGER
TriggerTech Adjustable, 2.5 - 5 lbs
MUZZLE DEVICE
SA Radial Brake, Mil-Spec Green Cerakote® H-264
MAGAZINES
(1) 3-Round, AICS Short Action
WEIGHT
6 lbs 4 oz
LENGTH
40.5" - 41.75"

Been a lurker and reader in here for quite some time and used this forum as a reference more than a few times. So, I figured I’d join for a little more access. Currently in the process of finishing up my M40A1 build (looking for a Unertl 10X and rings). Looking forward to more great info!

I have a Remington 700 .308 rifle; I am trying to find out any information I can. The part that makes it different is a Billy Martin (LOD Assoc.) Mcmillan Stock in OD Green, I cannot find any information on value or how many were mad. Mcmillian can't help.

SOLD

Leupold Mark5HD PR2 180222. Less than 200 rounds on it includes box and everything that was in the box. Mount could be had for additional$. $1700 for scope shipped

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.