I have a set of forster belted magnum go and no go guages for sale. Use for 7mm rem mag 300 win mag ect.

$75

This is a brand new, never used, B&T Titanium Surefire 5.56/7.62 to Hub (1.375x24) mount.

SOLD

Brand new never used. Will include Modified case for OAL gauge also brand new. Full length bushing dies. Sold

Selling my holster, Safariland 6390RDS with the Cordura fabric in black. It fits the Sig P320 RX but fits all the following guns that I’ve tested it with:
- Sig p320s
- Glock 17/22
- Glock 19/23
- Glock 45/47
- 4.25” 2011s

Comes as shown. It’s a midride height with a QLS fork/plate mounted in a UBL, light plug delete.

Price is $110 $100 shipped CONUS

Selling this Nightforce ATACR 4-20 MilXt in very good condition. Asking $2400 $2,200 shipped.

I just bought a dnt thermnight 335, and probably going with a patriot arms 223, for a dedicated night rig. Try to stay in it cheapish.

Next will be suppressor, got 3 in mind. Will be on either of my ar223s or 6.5cm bolt gun, and a 6cm once it's done. Eventually I will buy more suppressors, but for the time being just getting one of these, this is also my first suppressor.

Jolene s, cheapest of the bunch, good reviews and feedback

Enticer s, next highest, pew science seems to really like it

Abel theorem s, highest, sounds like a great company, from what I have read on here,and I can get a vented end cap, to make it more versatile between gas and bolt gun.

I know the usual barrel length on the LRP-07 factory builds is 20-22" and the max length handguard is 17.25". Has anyone used anything longer, like a 24" barrel? If so could you drop a pic and how was the balance of the rifle with the slightly longer barrel? I want to go a little longer one one of my barrels for this build so that my velocities may be a little more consistent with online load data since most are based off a 24-26" barrel.

I tend to build my rifles from receiver sets, but I want to buy a complete rifle and I was looking at 8.6 blackout. Do you all think it has staying power? Only because I don't intend to reload my own ammo so I'm going to rely on buying factory ammo. Do you see Hornady offering an alternative to 8.6 like they did with their 338 Arc as an alternative to 300blck out?

My intentions for this rifle is to be a short barrel rifle that is fired suppressed. I'm considering 300blkout, 338 Arc, and 8.6. My attraction to the 8.6 is that it's a caliber for a large frame rifle, and it would be nice to have a large frame SBR that shoots quietly since I don't have that in my collection. Also... I have like 3 AR15's in 300blk out, a few non AR's in 300blkout, and I will be getting 338 ARC guns soon too.

PEQ 15 full kit DOM Sep 23 $2200
Clean illuminator

PEQ 15 sold
Clean illuminator with no kit

Jerry C5 COTI NVG Fusion
This is a brand new clip on thermal imager that allows you to clip on to a night vision optic so you can have the best of both worlds. It projects a thermal image into your night vision device. This comes with 640 resolution. Here's an example of how good it works.

Login to view embedded media

Brand New in the Box
Visible/ IR laser and IR illuminator

Brand New in the Box
Visible/ IR laser and IR illuminator
This laser has a mode with a low power laser and full power illuminator so you don't bloom out your target with a full power laser.

Zeiss conquest hd 15x56 in as new condition.
Six months old and only made 5 range trips.

This Element is fully loaded and includes the following accessories:

Black XLR Element aluminum chassis with C6 buttstock
XLR Bag rider
XLR thumb rest
Ergo grip 1 vertical and 1 tactical grip
Element internal weight kit
C6 buttstock weight kit
XLR adjustable DBM
Short and tactical long mag latch
XLR long and short C6 buttstock LOP adapter
One 5 round 3.850 300 WM magazine (used for 7 PRC)

Everything in excellent condition. The smudges you see in some of the pictures is grease from the LOP adapter that I got on my hands when installing. This is perfect as new condition with zero blemishes.

$975 shipped

Up for sale is a Trijicon Accupoint 2.5-10x56 green mil dot reticle. Scope body has some marks and small scuffs but glass is perfect to my eyes. Scope is sitting in seekins 6/4 rings.

Looking to get $550 shipped for scope and rings

I have two boxes(same lot) of 7mm 180gr Berger Hybrids. One box has a a full 100 and the other has a bit over 100, probably around 20 extra. $110 shipped.

Nighthawk 1911 GRP w/ Rail with Surefire X300 ULTRA $3,250.00
Like NEW, it has not been fired other than at the factory.
Comes with 1 Nighthawk mag, 1 Wilson Combat mag, Test Target, all paperwork, key chain, barrel bushing wrench, test shell case and sticker.
Will ship or PPT in Sacramento CA.

For sale is an excellent condition Type 2 RMR (black).

Has the original box and papers
Will include a sealing plate

Asking $425 shipped OBO

for more pictures or info please PM me

So, maybe a long story short. I had bought a Vudoo repeater a few years back in a Cadex Chassis,

then had a Vudoo Single Shot built when they first offered the V22S.

I ended up selling both of them (the V22S I never actually even shot). I just didn’t ‘get into’ the whole benchrest 22 ‘thing’ the way I thought I would. But there was one thing I knew for certain and that was as soon as I sold them, I’d want to ty again.

Now I’m looking at the MPA Matrix Pro. Just curious if there are other options I should be looking at? I know Vudoo themselves of course, but anyone else? Think about what you'd like since it'll probably be up for sale here after I buy it

Some scratches on the turrets but everything functions fine. The glass is perfect not scratches. It seams to track just fine.
1500.00 shipped. Not really interested in any trades at the moment

Been sitting on a gas gun for about 3 months and never got shot. No time to shoot a ton so offloading. Reticle is a tremor 3

Looking for 1950 shipped and insured for scope and mount. Both are perfect with out a blemish on them.

Will separate scope 1950 mount 200

Still culling the herd! These two uppers are on the chopping block.

Payment by PayPal f&f please with NO comments. Or you cover the fees.

Trades? Maybe …. But am really just needing the cash.

Luth ar-15 223 Remington upper. Comes with the bcg and charging handle. 1/9 twist 20” fluted heavy barrel. The a2 flash hider is somewhere in my parts bin…. If I find it? I’ll send it along. If not? I’ll include the cheap thread cover. Put about 200 rounds through it. I did purchase it new. Bipod rail,scope and mount not included. 300.00 shipped SOLD!

6mm arc mk12 mod h’ish upper. Don’t know much about it. It’s just sat in the safe since I purchased it. It’ll come with a new 15 round mag. Asking 650.00 shipped. Here’s the original thread where I purchased it. The badger riser is not included.

Mtbcrazy13tj said:

Cool upper only shot to test fire and confirm function after grabbing it on the hide

Pri hand guard and optics rail

Missing one screw for optics rail can order form pri but never did didn’t seem to cause issues however

Arca rail

Mcgowen barrel chamber 6mm arc with correct collar mounted great with my otter ocm 5

Willing to potentially separate

Upper w/ bcg $850 price drop $650

Arken sh 4 gen 2 6-24 $250 add $50 I will include griffin sprm rings

Barrel info in pictures

Click to expand...

No shipping.

I have 2 brand new 8 pounders and 2 1 pounders. Then I have an 8 that's been open I will weigh it.

Price I need to look but what ever is going rate and fair. We are just switching powders and don't have much use for this.

Make offers willing to make deals.

MPOD f class
2.625” width (I had forgotten this was available in two sizes when I first posted)
This is the smaller of the two, and the egw website lists the width as 2.625”

My calipers show it just slightly smaller, photo added

I ordered this and used it for awhile with a tslot to pic rail adapter I put together. I used it mostly for some 50 yard rimfire benchrest where we are shooting a single shot at individual targets and I have found the adjustable legs on the Rempel f class to be more user friendly and just no longer use the mpod

Has a few marks on the finish I tried capturing in the photos

$200 shipped

CZ 457 Standard Length 25 MOA Picatinny Rail

Triggers by Scar

$40 shipped