Selling Wilcox Raptar S ES manufactured 10/2020. Price $6k shipped CONUS. This is an excellent working unit. Vis laser, IR laser, illuminator, and AB. Willing to bundle with a UTC Xii for $24k. Willing to negotiate in PM for serious buyers. No trades.




Illuminator @50 yards against corn field


First image is 2/3 ipsc @560
Second image is IR laser pointer on same target



See attached images for close-up pics of unit

TS Customs 22 creed. LP Fuzion Ti SA. XLR element 4.0 magnesium chassis. 20” Benchmark carbon, threaded. Trigger tech special. It’s brand new, never fired. Just been sitting in my safe for the last year. Selling to fund another project. PM for more pics and info

At a match recently someone recommended using night vision through the barrel of my Vector X to see where the laser hit and how it was oriented. He also had a pair of the Vectors and his reticle was at a 45* angle when he tested them this way. After checking mine recently, I found mine was oriented very similarly to his. Here’s a picture of the laser in my Vectors.



Now that I know how the laser is laid out relative to the reticle, it makes more sense why I haven’t been able to precisely pinpoint the laser location using the typical telephone pole/electrical wire tricks as the readings were not always consistent.

I also mapped the laser on a pair of Geovid Pro’s and it was halfway outside of the circle aiming point in the upper left quadrant.

I’m curious how many others have tried this trick. Has anyone else done this test? If so, is your laser oriented horizontally or is it at an angle? Has anyone noticed a difference in laser performance based on horizontality? Without having my hands on a lot of units, not sure how normal/irregular different laser beams and collimations are. Very curious to see if others can report back on their experience with this test.

Brand new, never opened LabRadar LX. $550 shipped.

Apparently, Gene Hackman and his wife were found dead in his Santa Fe home. He was 95.

RIP Popeye!

Login to view embedded media

Looking for a Aero solus 223 bolt head. Aero isn't getting a order from me. There shipping times are very bad currently.

I have a b14 hmr bergara and I want to add weight to make it more balanced? It has with the original stock.

Gun has less than 30 rounds fired through it. Built by Lone Wolf Rifles.
27" Bartlein barrel 1:8.75
KRG Bravo chassis
Triggertech Special
LWR action
Reamer is a 7-300 PRC 3/4° lead with .185 freebore
Optic is a Valdada Recon G2 4.8-30x56 mil. Gun is heavy but a shooter, still needs to be fully broken in i think. Shooting .72 group with me behind the gun and I’m not the most disciplined shooter.


Only trades I’m really wanting is a 18-22 carbon barrel 6.5 creedmoor chassis gun OR A 6.5 Creedmoor Sig across and cash. I will entertain other calibers but i shoot a lot of deer depredation permits and coyotes so varmint/medium game friendly is best.

I can ship , if the deal is good i will cover it. If interested in purchasing shoot me a message.

Ruger M77 tang safety made in 1976 chambered in 6mm Remington. Very good to excellent condition. Looks to have been fired very little. Cheap scope has been removed. Will come with the scope rings. $1600 shipped FFL to FFL. Can get better pics if needed.

I have -2- Glaco shoulder holsters for sale, one is new in package and the other one is almost new, part number is CL2-838R, both holsters are identical and both have dual magazine pouches on opposite side, these are for a right handed shooter.
Holsters are made for Sig 365X or a Sig 365XL with or without red dot sight.
selling new holster for 85.00 shipped==========SOLD==========
selling almost new holster for 70.00 shipped.==SOLD====
located in upper MI.
cash, money order or paypal F/F

Selling a lightly used SureFire X400 Ultra Green light/laser with TangoDown Surefire vertical grip. I purchased it new, and used on my AR for a handful of range trips. Just going a different route with the build and no longer need. Do not want to separate the grip and light.

Asking $325 obo shipped

Hey guys,

Swarovski relased their new Z5 + lline of optics. It is retaining the same 5x mag range, but with more turret options, 300 tube, and magnification ranges.
Let me know if you have any questions, shop yours below:

​

​

Connor

I just picked up an AAC Tirant 45M and the piston spring that came with it will not fit around a M16x1RH AAC piston. In addition to that, the piston itself has threads so deep/long that it actually touches the face of my MK23.

I looked around online and found that a Silencerco piston spring will work on the AAC. So I grabbed a spare spring I had from my Octane and it does indeed fit and everything screws together correctly. Which is how I saw that the piston hits the face of the MK23.

I compared the AAC piston to the Silencerco version I had and they appear to be identical, except it’s actually physically longer but has a shallower thread. I put the Silencerco piston and spring in the AAC and everything tightens up as expected and the piston does not hit the face of the MK23.

So my question is, is it ok to use this configuration? I can’t find anything online about it other than the spring being ok.

These are the 4 screw ultra light, lowest ones they list at .885”. 30mm tube

$125 TYD, PP FF or Venmo

Arisaka Defense Offset Scout Light Mount - Picatinny​

$SOLD shipped ground lower 48 Zelle preferred.

Remington 700 LA 30-06 Lightweight Hunting Rifle Project w/ NX8 2.5-20X50

I say lightweight, but I'm not counting oz's. Just in general terms of my objective.

Have a set of NF Ultralight 4 screw .885" rings I was planning on using but open to suggestions.

Looking at:

Near Precision 40 MOA
Seekins 20 MOA
Farrell FG force 20 MOA

Looking at these three cause of the integral recoil lug.

Probably don't need a 20+ MOA rail for the application, but figure I'd just get it. Never know what this rifle might become down the road.

In the same vein probably worth it to re drill and tap for the #8 screws?

KAC Knight's Armament SR-25 16" 7.62/.308 upper, about 400 rounds fired, taken off a complete SR-25 purchased in late 2024

I don't need the temptation in the safe for this to spawn a whole 'nother SR-25 with accoutrements

Restocking rarer calibers:

Norma 284 Win Brass: $74.95 / 50 ct

Norma 460 Wby Mag: $109.95 / 25 ct

Norma 500 Jeffery: $119.95 / 25 ct

Norma 6.5 Japanese: $59.95 / 50 ct

Norma 375 Flanged Magnum Nitro Express: $139 / 50 ct

More good stuff coming soon. 300 Norma Mag is still 60% off as well:

Magpul PRS Lite. Black. Like new.

$85 shipped. Paypal preferred.
SOLD

Hello all,
I’ve got a Nightforce NX8 2.5-20x50 F1 for sale. Mil - C reticle, Illuminated, Zero Stop. It'll come with everything pictured (scope, sunshade, caps). If there are any questions please let me know. I want to tinker with another scope this year, probably another NF so this ones up for sale. I tried to take detailed pics, glass is hard to get a good look at in pictures but both ends are in great shape. I also have some Hawkins High rings up for grabs if you want to make me an offer on those.

$1600 shipped to the lower 48. I'll cover shipping, you cover fees if using PP G and S.

Bought one of these units for $270 back in 2020 or 2021. Used it for a couple years. It was decent... Resolution was +/- .1 grain. Nothing too fancy. But it was easy to clean and empty out powder and change to a different one. Pretty user friendly.

Then it shit the bed on me. I suspected the load cell went bad. Figured I was up the creek and set it on the shelf, bought something else, and moved on.

My wife, being the frugal person she is, asked me about it a few months back. I told her it was shot and dropped the issue. She emailed Lyman and told them the issue. They told her they had had some issues with load cells and wanted us to send it in.

So we packed it up and shipped it back... At our expense... And I was skeptical about what would come of it.

Lo and behold, it arrived in the mail today. Load cell was replaced and the unit was tested and they included the test documentation.

So, I had to pay shipping one way. But Lyman stood behind their product. Fixed it. And shipped it back to me.

In today's market I didn't expect much. But I felt it was fair to give Lyman and their customer service credit for standing behind their product.

Mike

95 pieces of lapua .308 palma SRP 1x fired. Has been deprimed, but not sized or cleaned. $85 shipped.

60 pieces 1x fired black hills 308 brass $45 shipped

60 pieces of hornady 6mm creedmoor brass 1x fired $40 shipped

80 rounds of hornady 6.5 brass 1x fired (60 brass cases, 20 nickel) $55 shipped

100 new (unopened) 300 blackout starline brass. $40 shipped

New bag (24 count) Remington ultimate muzzleloader primer/brass pieces. $30 shipped

10 round double stack A.R.C magazine (.308 compatible) $50 shipped

12 round MDT magazine (.308 compatible) $SOLD

Leather kimber sling. I have had this for a few years, I don't think I ever actually used it. $40 shipped