$240 shipped --- ARC M-Brace 35mm, 1.5", 20moa condition is like new, no thread locker on screws and always used a torque wrench on the fasteners included bubble level.

$80 shipped --- Tikka CTR oem pic rail, lowest profile rail for Tikkas, included recoil dowels and fasteners. (listed in another Tikka specific thread, listing here incase someone sees it and is interested)

Hey everyone, if you need any help with technical support, go ahead and send me a private message so that I can help! If you're having issues:

• Accessing your account
• Managing your upgrade
• Accessing the Post Exchange
• Using HideTV or the community app

Let me know if you're experiencing one of these issues or an issue not listed here and I can help you get it resolved

Bought a Tikka recently for the action, selling all the oem parts off of it. All new unfired.

$100 — 270WSM 24” Lite SS barrel
$sold — Factory trigger
$80 — Factory CTR pic rail, this is the lowest rail you can get for a Tikka

Make offer on the following as a package:
Factory stock
Factory polymer bottom “metal”
Factory WSM mag

If someone wants the barrel and trigger the stock, mag, and bm can be included free.

For Sale

4 x Autel Evo2 v1 drones

3 of them are thermal (one of which is an enterprise package)
1 is a 6k day drone
The enterprise comes with a smart controller and a speaker and lights and a beacon (these last three are modules that plug in to the foretop of the drone).
.
I have 1 other smart controller that will work with any of the other 3. Whoever buys it first gets it.

I have 2 v1 live decks (pics pending). Go to whoever buys them first.

Total 14 batteries. Each drone will come with 3 batteries (how many they normally come with). The other 2 go to whoever buys them first.

Each drone will come with a stock charger. There’s a fifth charger that goes to whoever buys it first.

Each drone will come in its original factory hard case.

The 2 v1 thermal drones have FLIR camera, the enterprise has an IRAY camera.

One of the v1 FLIR drones has a customer remote chest carry rig.

If someone is interested, PM me. Tell me where you are (zip) and I’ll estimate shipping online with UPS (you can replicate to make sure I’m not cheating ). Then we will add that to the price. Shipping these dang hard cases isn’t free !

UPS Ground Shipping estimates

(A) V1 Enterprise $114
(B) V1 thermal $103
‘(C) V1 6k day drone $53
Thermal drone $3000
Day Drone $900
WIth hardcase, 3 batts, charger, extra props, regular controller
Smart Controller $500 (Enterprise comes with smart controller only, but has additional add on attachments)
Live deck $250 each
Extra Batt $150 each
Extra charger $25
Fox Fury $120 (exolander)
Fox Fury (lights) $25 each
Extra remote ($100)
If an accessory won’t fit in the hardcase, I’ll pay the shipping for that.

I’ll put up a few pics, but won’t put of pics of everything - too many pics. If you need more pics, PM what you need.

V1s are have no built in RFID. Bring your own RFID strapon.
V1 are a little less nanny on atti mode and hurrying RTB under certain conditions.

(I’m going all in on buying parts and assembling my own - to gain more interoperability)

PM for questions

Thanks for looking !


==
V1 Ent with Smart controller


==
V1 FLIR with customer chest carrier


==
V1 FLIR


==
V1 6k

Work at the Forest Circus. Seriously thinking of getting out going into teaching and working part time as a forester. I could make the same or more and actually be home and spend time with my family. Stupid shit was going on under Biden and stupid shit is still going on now. We lost some good people due to Rifs and what not but the same idiots are still around and will be for sometime. Its going to be a while until things are fixed. Not being anti Trump, just burnt out on some of the things I deal with in the FS but would not deal with in the Private sector. Grass isn't always greener. I'm ready to just work on my own, I went through licensing, I have my own equipment, I can write management plans, do tsi, mark timber, NNIS treatments ect on my own with private landowners.

I guess the big question is, if I take the deferred resignation would that screw up any chance of getting another job? I am not sure how to explain that one away during an interview. I'm assuming the right answer is to wait until a new opportunity arrives but I am not sure.

Have the following laying around/not being used. All prices are OBO and include shipping:

TBAC Bipod + ADM Picatinny QD
$SOLD

Kestrel 5700 Hornady (w/ T1C kestrel pouch)
$290

Fish Hunt Fight Chest Rig Gen1
$60

(REDUCED) LNIB 2021+ COLT ANACONDA 4" Barrel, comes with everything NEW on top of a new set of CO076HO8 Nill Grips - Colt Python / Anaconda, which are shown installed. ($235 value), also comes with original grips.

Shot once at range with less than 50 rounds through it. It has Wilson combat Sights installed, vast improvement over OEM.
After I shot it once it has just sat and became a safe queen.

Asking $1400 $1350, $1200, Shipped to your FFL, PayPal F/F preferred, but will entertain other payment methods like ZELLE or VENMO.

First to say they will take it with a follow-up PM wins, serious inquires only and NO TRADES. Thanks for looking.

Looking to trade for or buy a cf 20-22" 22cm barrel for Zermatt origin or TL3.

I have. 20" 6.5cm proof carbon barrel for tl3 or origin with hunts recoil lug. Can also throw in a box of once fired lapua srp brass as well. Here's how the barrel shoots with 135gr bergers. Top hole was first shot then made an adjustment for 3 shot group. Avg 2807fps

So Defiance magnum bolt face is .550, but the 300 PRC case base is .534.

A .016 tolerance seems high to me on paper, but I obviously could be wrong. Is this ok for a standard bolt face vs. the 300 PRC case? Am I being too precise, or is this normal?

I know several folks including myself have been playing with the 22 creedmoor for a while now. Please keep this thread to actual reloading information, and if you can please post some round count, barrel life numbers are all over the place.

Here is a brief summary of the cartridge. You need to know that it is a laser beam and varmint vaporizer! The 22 creed feeds awesome out of a aics/aw mags, has increased case capacity, and can toss 80gr pills over 3400fps. Also, you can use youre existing creedmoor die sets with a different bushing and seater or call up whidden and get a custom set. Using 6mm creedmoor brass is the easiest way to make brass, but some have fireformed 22-250 brass into 22creed.

Please follow the format of

bullet/ weight/type
powder
charge weight
primer
velocity
barrel make, twist , length
round count on barrel
any other info, fowling, groups, effects on game or varmints

thanks for the information

Area 419 36mm mount NIB 1.26" 0moa cant 310.00
Whidden gun works 6mm creedmoor click adjust fl bushing sizer and seater set with bushing set 275.00
Cortina Precision 6 Dasher sizing die with .264 bushing 250.00
Leupold Bx-5 15x56 Binos NIB 800.00
Seekins 34mm Low rings 90.00
All items shipped in lower 48 OBO

All same lot number
Part number 28407
$380 shipped

I have 3 brand new in the box accutac br4 gen 2 with arca qd 325.00 ea. + shipping
Also have 2 trigger tech diamonds , rem 700 or clone footprint, right hand safety , straight
295.00 ea plus shipping
Will get pics when i get home this evening

WTB Berger 144 LRHT. Preferably same lot.

I'm torn between to get a Black Rifle 7.62x39 upper (LPR or CAP version) or Faxon upper? 16" or 12" barrel length

Both are piston. Black Rifle looks like Adams arms piston which might contribute to the accuracy while Faxon is like PWS has a bigger piston

I want accuracy and reliability

Appreciate feedback from guys who actually use one.

Hello, what from the two for a general usage (bench and prone)?

My targets a the range may vary with and angle from 5º to 15º up higth.

My rifle are about 18.75lbs.

Thanks

Hi all,

I have two rifles chambered in 6.5 Creedmoor (Ruger RPR and Accuracy International AT-X) both with Vortex Razor HD Gen 2 scopes. I shoot at a range with known distances from 100-1200 yards in 100 yard increments.

My rifles are zeroed for 100 yards and I have dope settings for 100, 200, 300 and 600 yards. I've tried a variety of different calculators (Hornady 4DOF, Vortex, several others). They all seem consistent in their come up values which don't match either of my rifles. For instance with the RPR at 600 yards they state around 12.8MOA come up while I have to actually dial 14.5 - a big difference! With the AI, the calculators state 1.35 come up at 200 yards when I actually have to dial -0.25 from my 100 yard zero.

I'm using a Garmin chrono so have accurate MV. I'm using Hornady ELDM 147gr factory ammo so know the bullet weight, am specifying barrel twist, sight height over barrel, temperature etc.

Is there an explanation why the calculators seem so far off vs my two rifles?

I want to shoot at 1000 yards and have no dope for that. How can I use a calculator to determine that? Should I change the bullet G7 BC to accurately match the come up at 600 yards and then use the 1000 yard figure the calculator then suggests?

All gems of experience welcome!

Thanks.
Graham

Looking for a set of Hawkins heavy tac rings or one piece mount in 34mm diameter . Lmk what you have. Thank you!

Gen 1 triple pull for sale. I did buy this used.
Used for several matches and never had any issues with it. Asking 700 TYD

Like new .. used a for a few range trips.

$55 shipped

PayPal F&F only

Still new in plastic.. never used ..

I believe it's a 8 or a 10rd mag...

$55 shipped
PayPal F&F only

Greay condition.
Used very little..
30MM
1.125 HEIGHT
Comes with the pic rail... awesome lil set - up

$85 SHIPPED
PAYPAL F&F

As title states, looking for a 300 Win Mag barrel for an AXSR. Any profit but prefer Proof.

Thanks
Nick

For Sale: Magpul PRS GEN 3 stock - FDE

Used but not abused

$140 shipped

Very nice factory Colt M16A1 fully transferable on a form 4 in Oklahoma. Only small trade of interest would be a shorter 308 bolt gun with carbon fiber barrel.
$42,500