Hey guys, there's a new ZCO Hunter scope being released at the IWA event for the European market. I figured that I would answer some questions before the rumors spread.

1. This is a European scope only for now
2. It's not being released very soon.
3. A United States based version is not coming right away as the design will most likely be different.

Hi, i am probably massively overthinking this but, since this is a pretty expensive rig, i want to set it up in the best way. I mounted the scope following a strict procedure (the crosshair is level to gravity and to the top ring bubble, everything is torqued down to specs). It was a long process and i wish i won't have to do it again.

Using the typical criss cross pattern method i torqued every top ring screw to 25 in/lbs with these hawkins light tactical 30 mm rings.

At the end of the process i was very satisfied because the system crosshair-bubble is perfectly leveled to gravity. I noticed that the gap between the front and rear rings is not perfectly even. I read somewhere that someone is even using feeler gauges to check fo uniformity in the gaps. Since of course having the exact identical gap is impossible, i want to understand if in my case the gap differences are acceptable or not.

I measured with a feeler gauge: rear left 0.9 mm (0.035 inches) gap, rear right 0.9 mm gap, front left 0.80 mm (0.031 inches) gap, front right 0.85 mm gap. So basically there is a max 0.1 mm (1/256 inches) difference between the rear and the front rings, while there is a max 0.05 mm (1/512 inches) difference between left and right.

i will post some pics. The gap is not easily visible in these pics i think but when looking in person i notice it.

what do you guys think?

**** Rifle Is Sold Pending Funds ****

StG58 For Sale

I purchased this hand selected, matching number, excellent kit from A&D Global back in 1996 and it was built on a Type 3 Imbel Gear Logo receiver imported by Pacific Armament. Except for the approximately 400 rounds I fired through the rifle, it appeared to have been fired very little when I received the kit. The chamber headspaces at 1.634”.

I will include one 20 round FN magazine with the rifle.

I am asking $1,850.00 Shipped.

I will provide complete photographs upon e-mail request. There are too many to post here.

I gave up trying to find a box to ship the rifle and decided yesterday to build my own from clean large sheets of cardboard. I also used 1/2” cardboard to beef up the box top, bottom and sides along with internal supports the rifle. With this solution I was be able to include shipping in the $1,850.00 asking price. The buyer will have to pay for any insurance above the $100.00 that is included in the shipping charges.

If interested or have questions, contact me at [email protected]














I purchased this hand selected matching number, excellent kit from A&D Global back in 1996 and built it on an Type 3 Imbel Gear Logo receiver imported by Pacific Armament. Except for the approximately 400 rounds I fired through the rifle, it appeared to have been fired very little when I received the kit. The chamber headspaces at 1.634”.

Ive taken my custom 6.5 Grendel bolt action to 1500, but this was my personal best cold bore. 12 inch plate at 1239 yards with reloads.

Login to view embedded media

Anyone else have one? I have one and love it. Also does anyone know a reliable place to order bulk 7.5 ammo from?

Brand New Unopened LaRue Tactical MBT-2S-SB Trigger. $100 Shipped

New Unopened LaRue Tactical MBT-2S Trigger. $100 Shipped

**SOLD**
4.5-14x50 with a front focal TMR and the .1 mil(M5) adjustments. Includes an AR height mount. In good shape, some marks in the scope body. Lenses are in great shape.

$500 shipped, PP ff or Zelle.

Looking for a little info from the suppressor crowd. I am looking to get my first one and I will probably set up a rifle specifically for this project. This is really more a question of what is the best round to start with for a suppressed hunting rifle. I was eyeballing the 338 ARC pretty hard, but with all things equal as far as FPS goes would a 458 socom be a better option for hunting? Are there any rounds that are known to be particularly difficult as far as feeding and functioning that I should stay away from? I have a short barreled 338 lapua that I will probably eventually get a can for as well, but for this one I want to set up a rig to run true subsonic suppressed rounds but I would like to get as much kinetic energy as possible for hunting.

New Leupold field clamp. $60 Shipped

McMillan Game Hunter Stock
Action inlet: R700
Barrel inlet: Remington Varmint
BDM inlet: M5
Color: Paint Gray with Black Speckle
Fill: Ultralight Carbon Fiber
Recoil pad: 1" Decelerator
Accessories:

• Aluminum pillars installed from the factory
• 1 sling stud (not pictured but will install before shipping) at bottom rear, 2 sling studs at bottom front but studs removed and Atlas BT17 picatinny rail w/ QD installed.

Like new, had action/bdm fitted but never fired.

$500 shipped, Paypal F&F or +3% for G&S.

So here we go, a continuation of where they left off in 2020.

Voter Supression is against the law, not that it matters to the cop cutting the line off.
He said "The Process Is Slow & Grueling." IOW, you can't flip ballots that fast.



Login to view embedded media
Login to view embedded media
Here it shows them arresting a Trump supporter because she insists on voting.

Login to view embedded media

I figured you guys would get as big as a kick out of this as I do. I built my 8.6BLK a couple months ago, and have been waiting for the Porq Chop I ordered to get out of paperwork jail, which it finally did last weekend.

So the basics: Aero stripped upper and lower, 12” Faxon barrel, SLR handguard, ambi controls, TriggerTech single stage 3lb drop in trigger, Magpul grip and vertical grip, Aero BCG, Radian charging handle, Super 42 spring with Odin adjustable weight, SOPMOD (SBR’ed of course), Cherry Bomb muzzle device, Arken Optics 1-8 LPVO.

I mounted the can onto the rifle and realized something was missing. I have the Sylvan Arms folding stock adapter on all my AR15s, and since the buffer tube on an AR10 is the same size as an AR15’s, I figured, why the hell not? Ordered one, it got delivered Monday afternoon, threw it on Monday night. Now with the can and folding stock adapter, I am really loving this build. It’s a bit heavy (I’m guessing somewhere between 10lbs and 12lbs), but I’ve replaced my 12.5” 5.56 SBR with my 8.6 as the rifle I keep in my go bag.

I had some Magpul flip up backup sights, but didn’t like them, and threw those 45° flip up sights on it tonight, but I’m not really liking those either, so those may come off. If they do, I may just get a 45° mount and throw a red dot on it.

WTS KAC SR-25 Assembly Kit Lower - New in Box - Ended up with several, so this one needs to go. Will not shipped to any banned states. SOLD shipped to your FFL

Looking for a Primal Rights CPS. PM me if you have one to sell. Thanks

3-18x50 FFP Excellent condition. Will come with Wheeler 34mm rings and box 500.00 Venmo

$40 shipped - order here
mcleodprecision.com

Small, low profile and unobtrusive ARCA rail. Common use would be a hunting rifle that you want to ARCA attach to your tripod or bi-pod.

Less that 1/4" thick (.2465") and less that 3" long (.290). 1.5" wide.

Exactly 1 OZ weight.

Built in "end stop" that provides a positive stop as you slide into a tripod mount.

Mount with 10-32 or 10-24 screws into MLOK slots or option in for the thread inserts in 10-32 size. When you order, select your hardware choice.

6061-T6 aluminum machined in my shop here in the USA. Cerakote Stealth Grey finish which goes great with any color chassis or stock.

Notes: Thread inserts require a #1 Drill and 5/16-18 TAP. EZ-LOK 319-332 is what I provide in case you want to look it up.

I have switched to alpha brass. I have 200 unopened, same lot LRP brass. Priced at SOLD

Apparently 20k plus illegals have overwhelmed the town of Springfield Ohio. They are supposedly eating people’s pets among other things if this reporting is true:


Anyone in that area? If so is it true?

I recently acquired this winchester 75 made in 1948.


It's rough, but it's on my list. After a barrel band screw, sling screw, barrel block screws and trigger guard screw its complete.

The Redfield sights are nice but the rear just spins. Will adjust up or down from 35-40 and then just spin.

I'd like to put a barrel mounted optic on it. I've looked and the prices go from 400- 5000 for period correct.

What do you experienced people think would be a good choice. I just want to shoot it. It will be a shooter. If I could actually dial an old scope enough to shoot in a nrl/prs match that would be awesome and I would use it. But I don't think that's possible.

Or do I just find a EGW or similar scope mount and put a modern scope on it?

Budget is 700-800 for period correct'ish scopes. I've got modern scopes I can use and the egw rail just looks sold out, but I'm sure there are other options.



My plan is to clean it up, rust blue it, keep it oiled and shoot it.

And he says - “screw you for judging me no matter how dirty and underhand my actions are “

Poor fella- has no compunction about ruining someone’s life and violating all their rights but dreads ever being held to account.

I have a new condition Nightforce ATACR 1-8. Scope was only mounted but only saw a few rounds fired. It is black with the FC-DMx reticle and FFP. It comes with the badger ordnance condition one mount with an acro side mount. I can separate the mount and scope. Also comes with original box, paperwork and accessories. Asking $2600 shipped for the whole setup.

Apex Tactical Specialties Action Trigger Assembly Enhancement Kit Model: 100-056 Color: Red
M&P Shield
BRAND NEW IN UNOPENED PACKAGE
$150 shipped to you in CONUS. Zelle, Paypal or USPS money order only.

Made in the Great State of Arizona, USA
Reduces trigger pull by approximately 2 lbs.
Smooth uptake and reset
Reduces pre-travel
Reduces over-travel
Reduced reset
Center mounted pivoting safety maintains factory safety values.
Works with all Smith & Wesson M&P Shield Pistols in 9mm and .40 calibers.
NOT for use in the Shield 2.0.
NOT currently for use in the Shield 45.