Nightfroce Mil-Spec ATACR 1-8x24mm F1 S-VPS Kit - Horus TREMOR8

We have finally received our shipment of this Limited Edition scope kit.

Nightforce MIL-SPEC riflescopes undergo additional testing to ensure that they will perform reliably, repeatedly, and without fail, when combat conditions are at their worst.

This is a limited production run of 300 units of the United States Special Operations Command (USSOCOM) Squad Variable Power Scope (S-VPS) which is part of the Miniature Aiming Systems-Day Optic (MAS-D) program. This includes a MIL-SPEC ATACR™ 1-8x24mm F1 with Horus TREMOR8™ Reticle and includes the accompanying accessories, mounting kit, tools, and manuals all in the commemorative hard case.

Kit Contents
SU-294 PVS FFP ATACR 1-8x24
FLIP-UP LENS CAP, EYEPIECE (TAN)
FLIP-UP LENS CAP, OBJECTIVE (TAN)
BATTERY, CR2032
ULTRAMOUNT 34mm (COMPLETE)
MAGPUL PRO OFFSET SIGHT - FRONT
MAGPUL PRO OFFSET SIGHT - REAR
OPTICAL CLEANING KIT
TORQUE TOOL FIELD KIT 100-IN/LB
PADDED SCOPE CASE (COYOTE)
OPERATOR’S MANUAL
FIELD GUIDE

Specs:
MAGNIFICATION RANGE 1-8x
FOCAL PLANE First
WEIGHT 24 oz | 680 g
OVERALL LENGTH 10.1 in | 255.5 mm
BODY TUBE DIAMETER 34 mm
MOUNTING LENGTH 5.67 in | 144 mm
EXIT PUPIL DIAMETER 1x: 11.26 mm | 8x: 3.19 mm
FIELD OF VIEW @ 100 M/YD @100m: 1x: 32.0 m | 8x: 4.4 m
@100y: 1x: 96.1 ft | 8x: 13.1 ft
EYE RELIEF 3.74 in | 95 mm
PARALLAX ADJUSTMENT Fixed at 125 m
INTERNAL ADJUSTMENT RANGE E: 30 Mil-Radian | W: 30 Mil-Radian
ADJUSTMENT VALUE .1 Mil-Radian per click
ELEVATION FEATURE Capped, finger-adjustable
POWER THROW LEVER Standard
RETICLE Horus TREMOR8™

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Bullets:


200ct Hornady ELDX, 30 cal 178gr $spf

128ct Hornady ELDX, 6.5mm, 143gr, $spf


177ct Barnes TTSX, .284, 120gr $spf


100ct, new/unfired, Lapua 6.5x47 brass $165 shipped SPF


110ct factory Nosler 243 win ammo. 90gr Accubond. $225 shipped

Have a few mounts that I bought to determine what heights I prefer. All three have only been mounted on a rifle and scope leveled/torqued down. Never fielded or used past that. Couldn’t return since it’s used by the companies return policies.

Badger Ordnance Condition One Mount
1.93” Assaulter Height
30mm Main Tube
Black
$275

Unity Tactical FAST Mount
2.05” Height
34mm Main Tube
FDE
$300

Badger Ordnance Condition One Mount
1.70” Height
34mm Main Tube
Black
$275(Pending Funds/Sold)

PayPal, Venmo or Money Order
No trades

For sale is a Surefire X300 Ultra with the quick release mount for a Glock. Was mounted on a G45 full build I completed but has yet to be fired, so the light has been mounted, inside a kydex holster, turned on and off a few times, but never has been mounted to a gun when it was fired. I like Surefire but I don’t care for its operation, I usually run Streamlight, and I’m swapping this build to the Streamlight TLR-1 HL-X 1500 lumen model. I don’t think I have original packaging. Looking for $200 shipped.

I had a 6 Dasher in a Remington 700 action for a while. It fed fine, but the empty would end up in the ejection port almost every time. I eventually gave up and went with a Bighorn. Now I want another Dasher in a 700 action, the very same action if truth be told. A local shooter said he'd seem my problem before and it was caused by one piece scope rails. The brass hits it on ejection and bounces back in the chamber. I actually saw this on my old Dasher, but didn't put it together. He thought two piece scope mounts had fixed it.

Anyone else gotten a Dasher to eject with a R700 action?

Does anyone have any tips on shooting harder recoiling calibers from tripods? The rifle is a suppressed 300 norma that is about 18 Lbs with an arca rail and rrs anvil tripod. I usually shoot an old school .308/hog saddle setup with no issues but this has been a bit harder to manage. If you had to do a standing shot would you shorten the front leg to move the tripod center forward?

Sealed in box 7PRC AXSR Carbon Fiber Barrel $850 shipped

IMPORTANT. please read from DeSantis picture down. You have to make 2 action calls to keep FL from becoming a sanctuary state! SHARE and get others to do this!

as title says. It’s got a few thousand through it, comes with NF pic rail, I have a factory trigger to. Shows signs of use

Sold shipped fedex to your ffl

PayPal Venmo

Remington 700 short action BDL Bottom metal. Comes with box,follower,and spring. $150 each. Would trade one for a m5 short action bottom metal also.

I know we have quite a few Hams and radio enthusiasts on the Hide so figured someone might be interested in this receiver. It's a like-new ICOM IC-R75 communications receiver. Has lived its entire life on my office desk and seen little use. Works perfectly with no issues. No scratches, dings or dents. From a non-smoking home. Typical excellent ICOM quality, made in Japan. Really pulls in those weak signals when hooked up to a good antenna. Comes with original a/c power supply, box and owner's manual. Selling because it doesn't get used much anymore.

$475 shipped. Payment via PayPal FF or USPS MO. PM me if you have any questions.

Have an MDT ACC elite, used and has some match wear. Nothing crazy. For r700 rh short action. Has 1 mirage shield. 3 internal weights and buttstock dampeners


$1175 shipped.

Grayboe long action M5 bottom metal. They will come with action screws. $150 each. One has been milled on at the rear tang it’s $100. Would trade also for a short action M5 bottom metal.

1-M-LOK steel bag rider - $SOLD
1-Buttstock weight - $SOLD
or both for $90 shipped PP F&F or Venmo
These fit the SRS-X ACC premier buttstock

Selling a new TT525P with Gen3 XR Fine reticle. Purchased this a few months ago. Lightly set it in some rings on a rifle but never torqued down. Not a mark on it.

Comes in original box with everything as new.

$3900 OBO

Vudoo Gen II 18” 1:16 twist with trigger tech diamond pro curve trigger in a MDT HNT 26 chassis coming in at 8lbs without scope.
$2700

My nephew has an 1897 take down model 12 gauge. The bottom of the receiver where the magazine tube threads in has been flattened over the years. The interrupted threads are fine. Is it worth while to try to reform the receiver? This is a beater shotgun but it is his pride and joy. The gun was made in 1911. I will post pictures in the am. Thank you all!

RCBS MatchMaster 6.5 PRC die set with 289 bushing.

$135 shipped

Tikka T1x will not eject a fired case frame the chamber. Approximately 500 rounds fired from the gun. It was fine for a while, but started leaving fired cases jammed in the chamber. It will extract non fired rounds, in chamber. Bolt has been cleaned, chamber cleaned. The extractor won’t go over the case rim of a fired case. There’s a “fix” to remove a small amount of material from the extractor, but that hasn’t changed anything.

Has anyone has luck forming the hybrid .277 Fury brass to 6.5 or 6mm Creedmoor? Was the juice worth the squeeze? I’m thinking of putting together a 18 to 20” 6mm Creedmoor for coyotes, curious if reformed Fury brass could gain me back some speed from the shorter barrel.

Does anyone have a FORSTER Grendel - GO - gage handy ?and FIELD gauge.
what's the Size printed on side of the gage pls ?

the NO GO gage says: 1.2241

thanks

F/S Primary Machine barrel and guide rod. Fits CZ P-09 full size including the new Nocturne. Fluted and includes 15lb Wolf main spring. Lightly used.

$175 shipped stateside

We all knew this was coming

Interesting code words though.