Filter

Accessories Fully Loaded MPA Matrix Red

MPA Matrix (original)
R700 SA RH, Crimson Red (light red to reddish orange depending on lighting)
Full internal weight kit
Rear weight
Comp side rails
Arca/Pic extended bipod spigot
NV bridge with full length pic rail
Two grips, gas pedal, round saver (has chip,functional)
MPA pic brass catcher


Chassis was used mainly from bench, few times prone, and tripod, has a few small wear marks nothing major. I’d consider condition 8.5/10 with most wear on underside of buttstock and where I had weights attached long ago. Mag well still looks extremely fresh as I mostly ran poly 223 mags in this. Never bedded or modified, I liked it as it and hosted a few different actions over the years.

All the main hardwear is there, but after a move or two there might be a screw short on the rear weight I never ran.


For Sale Only. No Trades Please.

$850 PPFF shipped insured conus.
SPF To LexP39

Can accept a few other digital payment types also.

Attachments

  • IMG_1103.jpeg
    IMG_1103.jpeg
    214.2 KB · Views: 131
  • IMG_1102.jpeg
    IMG_1102.jpeg
    189.4 KB · Views: 120
  • IMG_1101.jpeg
    IMG_1101.jpeg
    1 MB · Views: 110
  • IMG_1100.jpeg
    IMG_1100.jpeg
    970.2 KB · Views: 108
  • IMG_1099.jpeg
    IMG_1099.jpeg
    655.7 KB · Views: 91
  • IMG_1092.jpeg
    IMG_1092.jpeg
    732.7 KB · Views: 88
  • IMG_1091.jpeg
    IMG_1091.jpeg
    696 KB · Views: 78
  • IMG_1090.jpeg
    IMG_1090.jpeg
    637.3 KB · Views: 72
  • IMG_1089.jpeg
    IMG_1089.jpeg
    687.5 KB · Views: 111

SOLD WTS Tikka T3 7mm-08 UPR

Hello,

I have a Tikka T3 7mm-08 for sale. SS action and barrel cerakoted tungsten/black mix, 17" medium Palma McGowen barrel, 1/8 twist threaded 5/8x24. Barrel and bolt fluted by LRI. 20 MOA scope mount, CTR bolt knob.
UPR stock painted w/alumahide, CTR bottom metal and one mag
150 rounds down the barrel. Well sub moa w/162gr ELDX/SST and even better w/120gr HH
$1,500 shipped to your FFL (FTF in south FL), discrete pp f&f
Pictured T6Xi 3-18x56 MSR2 is for sale as well for $1,250
Rifle and scope come out to 9# 9oz and rifle alone is 7# 2oz
I also have Havak HIT for sale in the same caliber and will keep whichever doesn’t sell

Thanks for looking
IMG_6030.jpeg
IMG_6029.jpeg

AW style 223 mags

Reading through a certain thread on here, a lot of folks including myself seem to want AW mags that would be compatible for a 223 cartridge. Why hasn’t anyone with a 3D printer prototyped something like that as there seems to be a lot of interest in something like that.

Would it be easier to develop an insert for an existing AW mag body similar to what MDT does for their 223mags? A whole unibody, printed magazine? I know @Tyler Kemp is the print god. Maybe he could do something like that?

Thinking out loud here as it would be cool to have that option as AICS mags are lame.

Accessories SOLD McMillan A4 long action

I have nice long action A4 in camo for sale.
Stock come with area 419 rail and bottom metal.
2 AICS 5 round magazines included.
Its in very good condition with little use.
Had an Accurate Ordance (aka Stiller) action fitted last. So a Remington 700 footprint.

Attachments

  • PXL_20240906_051417508.jpg
    PXL_20240906_051417508.jpg
    205.2 KB · Views: 244
  • PXL_20240906_051359886.jpg
    PXL_20240906_051359886.jpg
    203.2 KB · Views: 240
  • PXL_20240906_051328981.jpg
    PXL_20240906_051328981.jpg
    154.9 KB · Views: 199
  • PXL_20240906_051522254.jpg
    PXL_20240906_051522254.jpg
    132.1 KB · Views: 185
  • PXL_20240906_051614368.jpg
    PXL_20240906_051614368.jpg
    199.3 KB · Views: 167
  • PXL_20240906_051331922.jpg
    PXL_20240906_051331922.jpg
    240.1 KB · Views: 195
  • PXL_20241003_034539454.jpg
    PXL_20241003_034539454.jpg
    204.1 KB · Views: 96

FNG from Virginia

Howdy Folks,
In my quest to build a M40 replica, many searches have brought me to this site. I don't intend to bore you Folks with another M40 build but I will have questions. I have no delusions of thinking I am or could be a Sniper, hell I can hardly see my...when have to..., never mind I've just wanted a M40 for about 30 years. Kids, schools and two college tuitions have stood in the way. All have been paid off, now its my turn.

Accessories AI AT 308 barrels

I have a factory Bartlien 1/10 twist that's 24 inch length. 500 rounds down the tube, and a custom Bartlien 26inch 1/10 twist 308 match chamber. This maybe has 300 rounds down the tube.I realized I got too many barrels for it and just making room for my new 300wsm project asking 600 a piece or a package price of 1k. Shoot me a message, I can send more pics, just only grabbed a photo on the two last night before bed. These are posted on other platforms.

Attachments

  • 20240512_203208.jpg
    20240512_203208.jpg
    792.4 KB · Views: 99

Tikka TAC A1 chassis vs. KRG Whiskey 3

I apologize in advance as this has probably been debated to death but I am getting another Tikka for a predator hunting/NRL Hunter/PRS rifle to act as a backup to my CTR in a KRG Bravo.

I am between a TAC A1, mostly because there is a used one for sale at a good price, and a getting a CTR and putting it in a KRG Whiskey 3 folder which would cost a bit more. I really like folding stocks. It will get carried slung, on the seat of a truck, on a snowmobile, and used on short stalks.

The TAC A1 would be cheaper but I would need some mags for it while I already have a bunch of AICS mags. For the Whiskey 3 I would need an ARCA rail and spigot as well.

Is there any major advantage or disadvantage to either setup or reason you would choose one over the other? Maybe durability or something I am overlooking. I have shot both setups but not in a while.

Accessories Seekins 34mm 1" High Rings - 2 Sets, price drop!

Howdy,

Some odds and ends. All prices shipped. Venmo or paypal preferred.

Seekins 34 mm scope rings, 1" height - Both sets for $160 shipped
These are equivalent to the Vortex PMR/precision matched rings.
I have a set with torx screws and one with hex screws, both picked up from other folks on the hide. One of the ring to rail screws on the Torx set is a little sticky.
Hex screws - $90
Torx - $80

Magpul MOE SL Mil-Spec Buffer Stock - $SOLD
Came with a rifle and was immediately replaced. Thus, no box, etc.
These are $60+s/h+tax new.

Viking Tactics Wide Padded Sling - $SOLD
No attachment hardware. These are $55+s/h+tax new.

Attachments

  • MOE SL L.jpg
    MOE SL L.jpg
    261.4 KB · Views: 35
  • MOE SL R.jpg
    MOE SL R.jpg
    234.8 KB · Views: 40
  • Rings.jpg
    Rings.jpg
    296.9 KB · Views: 44
  • Rings2.jpg
    Rings2.jpg
    221.6 KB · Views: 44
  • Rings3.jpg
    Rings3.jpg
    242.1 KB · Views: 44
  • Rings4.jpg
    Rings4.jpg
    230.4 KB · Views: 39
  • Rings5.jpg
    Rings5.jpg
    259.4 KB · Views: 43
  • VTac Sling 2.jpg
    VTac Sling 2.jpg
    467.3 KB · Views: 43
  • VTac Sling.jpg
    VTac Sling.jpg
    377.2 KB · Views: 37

SOLD FS: Hinderer Eklipse 3.5” s45vn

Zelle, PayPal friends and family, no notes

$old shipped/insured

New Hinderer eklipse. S45vn harpoon spanto blade in stonewash. Black g-10 scale. Never carried or cut. Comes with everything from factory.

I’ll be away from my phone for a bit if I get any messages and I’ll get back to you. If you would like it, please say so in the comments below. Thanks!

Attachments

  • IMG_9614.jpeg
    IMG_9614.jpeg
    596.3 KB · Views: 35
  • IMG_9615.jpeg
    IMG_9615.jpeg
    691.6 KB · Views: 35
  • IMG_9616.jpeg
    IMG_9616.jpeg
    701.8 KB · Views: 31
  • IMG_9617.jpeg
    IMG_9617.jpeg
    579.2 KB · Views: 30
  • IMG_9619.jpeg
    IMG_9619.jpeg
    390.2 KB · Views: 34