Am I overworking myself, or is I ok yo have the bolt handle touch the stock a little? I don't remebr where I heard it shouldn't touch the stock.

Anyone out there running a B-14R steel barrel in .17 HMR? How is the performance/accuracy? I want something a more lethal and flatter than a .22 LR for close range varmints. I like the R700 compatibility.

Please PM if you have one you're looking to get rid of.

Hi Folks,

I have a Vortex LHT 4.5-22x50 scope that I mounted on a 30-06 rifle built on a Defiance action. I used Two piece Picatinny Bases and 1.2" high rings (there is no inclination in the rings or bases). I zeroed the rifle at 100 yards with Sako 150 grain Super Hammerhead ammo.

My elevation is set at 9 MRAD (3 MRAD on the second revolution of the turret) and I only have 2 MRAD of upwards elevation adjustment left. The scope has a totol of 22 Mils of elevation adjustment. The zero stop came installed on my scope, hence why I have only 11 Mils of total elevation adjustment available.

I'd like to confirm with the more knowledagble people on the forum that the above seems kosher?

I might look for two peice 20 moa bases just to have more elevation availble.

Thanks!

Was just curious if there have been any rumblings of a gen 2 atacr. I recently sold all of mine because the rotating oculars drove me crazy. Now I keep finding myself looking at them again. Really feel like the atacr line is due for some updates and didn’t know if anyone had the scoop.

Hello there fine folks,
i'm just now approaching this field, and i'm nowhere near as informed as i need to be to make an educated purchase, even though i've been trying to study online quite a bit.
The rifle i'm about to buy is probably gonna be either a CZ 457 Varmint or a Tikka T1X MRT (me being unfamiliar with this field makes me think those are probably cheap toys to many of you but hey, i'm just starting ).
Problem is... The scope. There are so many and so many specs that i'm going crazy, but based on the info i've gathered, i think what i'm looking for would be something like a 3-9x40 at the very least (even though the one i'm currently keeping an eye on is the Vector Optics Orion Pro Max 6-24X50 FFP SCFF-44), adjustable parallax, a mil-dot reticle and definitely FFP.
I'm probably (definitely) missing a bunch of others specs, (like i don't know how important an illuminated reticle would be, and so on) but... thoughts?
As for my budget, i'd try to stay around/not exceed 250$/€ (i'm from Europe, so something available there). My goal at the moment is learning and practice shooting at the range and that's it. I have a low to medium shooting experience and a low long range shooting experience.
Thanks in advance to anybody willing to share their wisdom with me!

Picked these up recently, but plans have changed. Will send certificate to buyer if they want it in hand.
There are no limitations listed on them, so you can use them for their thermals or some kilo 10Ks

I have 2 available

210 shipped each via venmo, PPFF or zelle

Price drop, again. There will be no more drops.

This has been a safe queen since I bought it new in 2017, and I've finally decided to sell it, it just never gets used.

Specs:
-GA Precision Tempest, nitrided. These are $1400 new today.
-20” Xcaliber barrel, 8 twist, chambered in 6m CM(.163 freebore). Contour is similar to rem varmint/med. palma and the muzzle measures .875
-Round count 381
-Area 419 Universal adapter
-comes with three trigger hangers to tune it with your trigger. Purchased from GA.
-Coated in Cerakote Elite Blackout and OD green(exterior of receiver only, bolt not coated)
-Barreled action and trigger hangers only, nothing else in the pics for sale.
-I have a new TT Diamond flat for sale if interested. I installed it to test for this ad only.

-This action has NEVER suffered from light primer strikes or any other issues.
-there are a few nicks on the bolt knob from sitting in the safe for years.
-I dont know if this will chamber factory ammo, i’ve never tried. For handloads, this freebore works well.
-the throat is in very good shape. i’ll post a vid when I get a chance.

If you're looking for an AI, but dont want an AI stock, this is your receiver. Feeds flawlessly from AW mags. I loaded up some 105 bergers to test for this ad. Zero load developement, and shoots great, see below.

PM me if interested. NO TRADES PLEASE.

$1150 shipped to your FFL.



I shot 87 vmax through this exclusively. Just to have something to show I loaded up some 105 Berg VLD’s. No developement whatsoever. 105 VLD jumped .025 with 38.5gr H4350. The chrono pic below is from the two paper groups.

The SSG3000 rifles have a quick barrel-change mechanism and long magazines. They can accommodate 30-06/6.5x55 class of cartridges. The 23.5" factory 308 barrels are known for their accuracy and long barrel life (made from tough German Krupp steel). The scope is a Leupold Mk4 LR 6.5-20 (2nd focal). The exposed surfaces from the camouflage paint look excellent (no wear). I don't know the round count on the barrel. Bipod/scope included.

$2250 shipped to your FFL.
SOLD

Vortex diamondback 2000 rangefinder asking $175 shipped

I have a Savage 110BA 338 Lapua, that I have had for about 15 years.
I recently took it in to a gunsmith to have the muzzle break taken off for the first time.
It was too tight for me to remove.

After I got it back I wanted to reinstall the muzzle break and do some shooting.

When I went to reinstall it I could not get it on to where it was before, there was about a 1/4 inch of thread still remaining.

I'm thinking there may have been loctite on the threads of the barrel when I bought it new, and after all these years it is so gunked up that the muzzle break won't go on all the way without some wrenching.

2 Questions:

1. What is the best way to clean off the threads on the barrel and on the inside of the muzzle break to remove the loctite or other substance ?
2. Does the muzzle break have to be in the original position (screwed all the way in) and aligned in a specific way, for the the rifle to shoot accurately ?

Thanks

As the title states, this give you $600.00 off any Foundation stock through their website to include the new Samson. $350obo. I can mail you the cert or send you a scanned copy

6.5 mm stainless. 5/8 Adapter included.

$110 shipped

Lightly used forester 6cm dies. .269 bushing included.

$150 shipped

Login to view embedded media

This is one of the few younger gun tubers that is worth watching.

Anything he talks about, he explores with actual field-testing to answer questions he had before filming.

In this one, he takes 2x 16” SR-25s out to 560, 630, 830, and 1250yds sequentially for a legit side-by-side real-world comparison.

He’s shooting 169gr SMKs in the .308 Win, and 144gr Hybrids in the 6.5CM.

He has about $13,600 wrapped up in one blaster, and probably $21,000 in the other with the Wilcox RAPTAR, not including the tripod, mags, or ammo.

482 pcs - 3x fired with mild load, 2820 w/ 115 DTACs and 2950 w/ 107 SMKs. Primer pockets still tight. Normal PRS wear.

$225 shipped

Used lightly one year. Scope includes rings and has quiet tape. Box included. No sunshade.

$350 tyd

Hello,

As title states, looking for a new/lightly used one to experiment with.

If you have one and want to sell shoot me a PM with a price shipped to 43016.

Thank you,
RR

Addendum: If you aren’t willing to ship first before receiving payment then don’t bother. I’ve fallen for enough scams on here.

The FUCK have people in this world become?
If that’d been me and my baby, that bitch would’ve been picking up her teeth off the ground.
Login to view embedded media

What’s for sale?​

These magazines are modified factory AI AW magazines adapted to use the Area 419 extension to safely fit 13 rounds - you’ll notice that unlike some other designs the bottom of the mag is now level rather than angled. 14 rounds can be stuffed into the magazine and still function, but is harsher on the spring and geometry looks to be less ideal.

These were made for me by another member; the process involves irrevocably modifying the factory magazine body so these must be used as seen there is no going back. Tested to feed with .308 Win and 6.5 CM, profiled to fit MDT’s ACC Elite chassis and M5 Precision DBM. Fed in my Coup de Grace without issue, buttery smooth. All have been tested for function, though clearly one has a few more cycles on it. Can’t guarantee they work with shorter rounds or other chassis/DBM models due to latch design etc.

What it cost?​

$160 per mag plus shipping of your choice and speed. Electronic no-fee payment accepted (Zelle preferred), USPS money orders, bank check or wire, personal checks too (shipping held).

We have them in stock and ready to ship to your FFL.
These are done by Vudoo.

I was able to get some Vudoo actions and had TS Customs Spin up some barrels and fit them. In the area they have won several matches and according to Lapua test center when I sent mine in, it is one of the best repeater rifle they have tested in a long time.
I have a few remaining.
Vudoo 360 Benchmark 24" 1.20 1:15 twist bare crown Black $SOLD
Vudoo 360 Benchmark 24" 1.20 1:16.5 twist bare crown Black $SOLD
Vudoo 360 Benchmark 24" 1.20 1:16.5 twist bare crown Black $SOLD

Pictures to come later (Its just a BA)

When they are sold they are gone. With the new deal, actions are hard to come by to get more TS Custom Vudoos made.

I live roughly an hour south of Atlanta. There are no long range shooting ranges around here.

I have not shot in over a year, and I wanted to start shooting again.

I looked at the match I had shot previously, back in 2023, the River Bend Gun Club Precision Rifle Match, which is normally once a month, and it is not being held in October. I went to the PRS web site and clicked on the southeast region, and, well, nothing for the remainder of 2024 and only one rimfire posted for 2025 (I do not yet have a rimfire precision rifle).

Are there so few matches, or am I not looking in the right places?

Feel free to point out that I am stupid - I admit that I may not be looking in the right places.

It does not have to be PRS sanctioned. In fact, the River Bend Gun Club Precision Rifle Match was not a PRS event.

I am terrible at this sport, but I still really enjoyed the four competitions in which I shot at River Bend. They were very welcoming to new shooters and tried to help me improve (and I did improve little by little each time). I want to get back at it.

Have 2 magneto speed hit indicators. Comes with few extra straps etc shown in the pics. Both work great. 150 shipped