SOLD 12 Boxes / 240 Rounds 6mm ARC Hornady 103gr ELD-X
- By ChrisAU
- Buy - Sell - Trade
- 0 Replies
Changing up what I shoot in my night hunting rig. $SOLD TYD via Venmo/Zelle/PayPal.
-
Having trouble using the site?
Contact support
Posts
Suppressors Liberty Precision Machine Anthem S
- The Armory
- 7 Replies
I was able to go and pick up this suppressor yesterday and thought I would post some photos since there is little info out there on them and they seem quite promising. It is a Liberty Precision Machine Anthem S. Really liking this thing and hoping the performance lives up to the Pew Science findings.
PEW Science Link:
pewscience.com
Welds, fit, and finish all look excellent:
This bottom section is very well thought out. HUB threads. EA licensed serial ring so baffle stacks can easily be changed out, repaired, and updated. Wrench flats on the suppressor body. Very, very well executed. (Ignore the dust)
At the front, the end cap is threaded and interchangeable for flush fit, different size openings, and a flash hider.
Baffle stack. Variable geometry and size clips in the baffle as well as a coaxial element:
Riley at LPM gave me this information via email regarding the durability of these cans. Note the tested down to a 12.5" 300 win mag!
"We did lots of testing on 10.5" 5.56 machine guns and optimized our welding to ensure a weld is the least likely fail point, we even use a special flux on the first weld to double the penetration and make that joint absolutely bomb proof.
Through testing we optimized the blast baffle shape and thickness, to ensure it wouldn't collapse while red hot and under direct impingement of the muzzle blast. The blast chamber wall thickness is tapered, to account for the temperature gradient along its length under extreme use and ensure a blast chamber failure is practically impossible, as a failure there is a massive safety risk to the shooter and those around them. The rest of the baffle stack had wall thicknesses optimized, to give us the best strength possible without going too overboard on the weight. At some point you have to pick an acceptable level of durability and call it good or the thing would weigh 2 lbs. One important note is that we design the inside of the baffle stack to fail BEFORE the tube will fail. This is extremely important, as a tube failure will send shrapnel in every direction, but a baffle collapse will send it forward/down range. This is an intentional safety feature, as it acts like a fuse and tells the shooter that something is wrong and to stop before they can do something that puts themselves and others at risk.
The Anthem cans are extremely tough, they will handle all but the most insane and impractical firing schedules you can throw at it. It is the only silencer so far to pass a 15 round test fire on a 12.5" .300 win mag, and it survived with zero damage. If you really want to run them hard on a SBR and/or machine gun, pick up a muzzle brake to act as a sacrificial blast baffle, it will help a lot to control erosion on the blast baffle face.
And finally, with the Serial ID Ring we license from Energetic Armament, you can be assured that if something does happen to the silencer, that we will be able to swap on a new baffle stack in less than 24 hours and your tax stamp and time investment will always be preserved and immune from damage."
Link:
libertyprecisionmachine.com
I'll follow up with some thoughts when I get a chance to do some shooting with it.
- Andrew
PEW Science Link:
Liberty Precision Machine Anthem-S .308 Suppressor Test — PEW Science
Liberty Precision Machine Anthem-S Silencer Test with back pressure data. Real sound signature data with the Suppression Rating from PEW Science. Hearing Safe determinations for your use case. How does it do as a 308 rifle suppressor? Can it suppress 7.62 NATO? Is it the best 308 hunting suppres
pewscience.com
Welds, fit, and finish all look excellent:
This bottom section is very well thought out. HUB threads. EA licensed serial ring so baffle stacks can easily be changed out, repaired, and updated. Wrench flats on the suppressor body. Very, very well executed. (Ignore the dust)
At the front, the end cap is threaded and interchangeable for flush fit, different size openings, and a flash hider.
Baffle stack. Variable geometry and size clips in the baffle as well as a coaxial element:
Riley at LPM gave me this information via email regarding the durability of these cans. Note the tested down to a 12.5" 300 win mag!
"We did lots of testing on 10.5" 5.56 machine guns and optimized our welding to ensure a weld is the least likely fail point, we even use a special flux on the first weld to double the penetration and make that joint absolutely bomb proof.
Through testing we optimized the blast baffle shape and thickness, to ensure it wouldn't collapse while red hot and under direct impingement of the muzzle blast. The blast chamber wall thickness is tapered, to account for the temperature gradient along its length under extreme use and ensure a blast chamber failure is practically impossible, as a failure there is a massive safety risk to the shooter and those around them. The rest of the baffle stack had wall thicknesses optimized, to give us the best strength possible without going too overboard on the weight. At some point you have to pick an acceptable level of durability and call it good or the thing would weigh 2 lbs. One important note is that we design the inside of the baffle stack to fail BEFORE the tube will fail. This is extremely important, as a tube failure will send shrapnel in every direction, but a baffle collapse will send it forward/down range. This is an intentional safety feature, as it acts like a fuse and tells the shooter that something is wrong and to stop before they can do something that puts themselves and others at risk.
The Anthem cans are extremely tough, they will handle all but the most insane and impractical firing schedules you can throw at it. It is the only silencer so far to pass a 15 round test fire on a 12.5" .300 win mag, and it survived with zero damage. If you really want to run them hard on a SBR and/or machine gun, pick up a muzzle brake to act as a sacrificial blast baffle, it will help a lot to control erosion on the blast baffle face.
And finally, with the Serial ID Ring we license from Energetic Armament, you can be assured that if something does happen to the silencer, that we will be able to swap on a new baffle stack in less than 24 hours and your tax stamp and time investment will always be preserved and immune from damage."
Link:
Anthem-S2 .30 Caliber Rifle Silencer – Liberty Precision Machine
libertyprecisionmachine.com
I'll follow up with some thoughts when I get a chance to do some shooting with it.
- Andrew
SOLD Vortex Razor HD Gen 3 6-36 EBR-7D MOA
- By MacBSG
- Buy - Sell - Trade
- 6 Replies
Like new Vortex Razor HD Gen 3 6-36 in MOA with EBR 7D reticle, comes with Area 419 rings.
$2,400 PayPal FF, shipped.
$2,400 PayPal FF, shipped.
Small caliber 500 yd steel match?
- By mulish
- Competition Shooting Talk
- 16 Replies
500 yd small caliber match ?
I'm interested in holding a small caliber match which would be 223 222. or 222 mag. We will be shooting at steel plates.
Would anybody be interested in shooting in this type of match? I would like to hold one of these every month or at least every other month.
Each shooter will get to shoot two separate 10-shot relays for points. The top eight shooters will then be in a eight-man single elimination bracket to determine the winner. Cash payout to the top shooter if we have enough entries. Each relay you will have 4 minutes to finish 10 shots. The bracket will be shot the same as last time. Scoring , 8 inch Target one point, 5 inch Target two points, 3-in Target three points. Match fee $40 . Do not be late . We will still be shooting Cold bore first thing in the morning as a $10 side pot. Front bipod and rear sandbags used for Shooting . Shooter May shoot from the bench or prone their choice . Acceptable calibers will be 223 . 222. 222 mag. You are allowed your own personal spotter to help you call hits and misses and shot placement. If you do not have one, the official spotter will help you the best they can. ARs are allowed to participate in these matches . Please let me know if you are wanting to participate.
Come prepared to shoot 500 yards. If you send a round down range and do not at least hit the berm which is 6 ft tall and 30 yards wide you will be disqualified from the match. Also the bolt to your rifle must be removed from it at all times except when you are ready to shoot your relay.
These matches will be located in valley view, Texas 76272
Reloading Equipment 22 Cal Spotlight / July 4th Deals End at Midnight / + Update on Canada Shipping
- Buy - Sell - Trade
- 2 Replies
| |
| |
| |
| |
| |
 | |
 | |
| |
| |
 | |
| |
|
KAK budget build
- By 806guns
- Semi-Automatic Rifles
- 16 Replies
Decided i needed another budget 556 build. I starred by looking at barrels from various mfg's and narrowed it down to these lengths
13.9
14.5
Or just a 18" spr contour
Kak has these barrels under oe-spec from 125-150.
Ordered the 18" and still may do a 13.9" later. Some pretty quick shipping as it's here a few days later.
I will borescope the barrel. And start assembly. I plan on using a BCM blemished upper receiver.
I may build a complete lower and build two separate uppers.
I like taking chances on these cheap barrels.
18" is 1:7 and will get fed 77gr handloads using sw match or 2520
13.9
14.5
Or just a 18" spr contour
Kak has these barrels under oe-spec from 125-150.
Ordered the 18" and still may do a 13.9" later. Some pretty quick shipping as it's here a few days later.
I will borescope the barrel. And start assembly. I plan on using a BCM blemished upper receiver.
I may build a complete lower and build two separate uppers.
I like taking chances on these cheap barrels.
18" is 1:7 and will get fed 77gr handloads using sw match or 2520
SOLD Kifaru KU4300 - ARK frame combo
- By Seader1084
- Buy - Sell - Trade
- 5 Replies
SOLD
Kifaru ku4300 - ARK frame combo plus lid
- brand new never used
- medium belt size- 22” frame
Lower 48 states only
shipping includedTrades - Garmin Xero C1 Pro chronograph
SOLD Magpul PRS lite stock black
- By Ajsomp
- Buy - Sell - Trade
- 1 Replies
Like new Magpul PRS lite stock. Never fielded - just fit tested on the lower. Going to stick with an adjustable stock.
Asking $90 obo shipped
Asking $90 obo shipped
Accessories Everything is sold(SOLD)Nightforce 7-35 ATACR MILXT,(SOLD) American Rifle Co. 34MM Rings, (SOLD)Area 419 Hellfire Match Stainless 6.5MM
- By MLS2GO
- Buy - Sell - Trade
- 3 Replies
(SOLD)For Sale Nightforce 7-35 ATACR MILXT reticle C613 with all accessories that came with it, Tool, Scope Caps, Lens Cloth, Extension, Screw on cover and Manual. See picture. I have included lots of pictures, there is a scratch on the top of the scope and minor signs of use. Illuminated reticle works. Other than things mentioned in excellent condition. I will ship with tracking and insurance and supply the tracking number. $2600 delivered to you.
(SOLD)American Rifle Company Rings 34MM tube, 32MM high, $130 shipped or will sell with the scope for $100.00 if still available. Same as above on shipping.
(SOLD)Area 419 Hellfire Match Muzzle Brake in stainless with 5/8 x 24 adapter. Used with minor scrapes on bottom. $125 shipped as noted above.
Any questions let me know. Paypal Friends and Family preferred.
PM if you want anything. Has priority over posts.
(SOLD)American Rifle Company Rings 34MM tube, 32MM high, $130 shipped or will sell with the scope for $100.00 if still available. Same as above on shipping.
(SOLD)Area 419 Hellfire Match Muzzle Brake in stainless with 5/8 x 24 adapter. Used with minor scrapes on bottom. $125 shipped as noted above.
Any questions let me know. Paypal Friends and Family preferred.
PM if you want anything. Has priority over posts.
