Selling my 7 SAUM barreled action.
- Defiance Classic LONG ACTION
- Proof Research 18” carbon wrapped barrel
- SRS TI Pro 3 port self timing brake
Chambered by Denny Powell in NM. Action, barrel, and brake are all cerakoted in Sniper Gray. I’ve shot about 320 rounds through it. This is great for an ultralight rifle build.
$1,600 shipped to your FFL.

Anybody have any feedback on the expansion and terminal performance of the 178 grain ELD-X on large game animals? How did they perform?

I've got a .308 with a 20" barrel, I'm assuming they're going ~2400 FPS (haven't chronographed yet).

Looking to get rid of a safe queen. Rifle has less than 100 rounds through it, all factory ammo (Hornady and Berger). It shot the 156 Berger factory ammo great, picture below. Minor ding on the bolt shroud but flawless otherwise.

Specs: Terminus Apollo Lite, Proof CF 24" 1-7.5 twist 5/8x24, Manners LRH, Hawkins Hunter M5 bottom metal (flush 3rd mag included), Timney Elite Hunter 1.75lbs. Bare rifle weighs 7lbs 6oz
Rings and muzzle device pictured not included, $2800 shipped/insured to your FFL.



100yd 5 shot group with Berger 156 factory, 2855fps MV avg.

Nightforce NX8 2.5-20X50 MOAR Reticle
Nightforce Ultralight Low Rings
Sunshade & Scope Chap
Box

$1750 Shipped

Priced to move! $2600! Selling my custom 22 inch 8 twist Proof carbon barrel Seekins PH2. Custom chamber for the 160 CX. Barrel/Action work done by Fritz (Black Canyon Customs). Less than 200 rounds fired and it shoots amazing. Loves Bergers and the CX. Manners LRH mini chassis stock. Bare rifle weighs 7.2 on my bathroom scale. No muzzle brake or scope

NO TRADES PLEASE

Good Afternoon everyone,

I have 500 80gr ELD M 224 bullets BNIB in sealed boxes that I’m looking to sell. All the same lot number.

115 shipped.

Nightforce magmount 34mm 1.5” 0moa. A361. It was mounted once seen very little outdoor use. great condition. https://www.nightforceusa.com/A361-NF-Nightforce-X-treme-Duty-UltraLite-Unimount-15--COMPA.aspx

Plus new in original packaging nightforce rail accessory platform RAP-i A686

Selling them together, $380 for both shipped TYD. PayPal and Venmo F/F only, no trades please.

Another electronic level on the market ,this one is an Italian design , combines the level unit with an ocular led indicator while also being half the price of MDT let alone MDT with Brandt built ocular optic fiber unit.

DIGITAL LED LEVEL V2.0-MLR RESEARCH CENTER

Levels has 3 LEDs, red, blue and green, if you have the weapon platform inclined more than 0.6° to the right or left, the corresponding LED lights up.
you can mount horizontally or vertically, just set the "zero" with the switch.
you can shift from right handed to left handed just holding the reset button for approximately 2 seconds.
The battery lasts about 14/15 hours and you charge it with a USB C in about 20/25 minutes.
housing is produced in UV-resistant black painted 3D printing.

I apologize in advance for the ALL caps in the title, but I'm losing my mind trying to get any substantive information about Pard thermals.

I am trying to find any North American human that owns/owned one and hopefully has owned other brands like Agm to give me any kind of insight.

The only thing I've been able to find is big name retailers, like Bass Pro Shops carrying them.. but... with no customer reviews so they're obviously not selling... and I have seen a few videos from European Youtubers who are probably being sponsored and they do not compare them to any other brand.

If I do an apples to apples comparison on the main and important specs, they are about 20% +/- less expensive than their competition but not so cheap like an Amazon knock offs. They obviously must be a (decent) company to get picked up by companies like bass pro and sportsman's warehouse etc.

There has been many instances in the past when a newer company to the US has trouble capturing market share due to ineffective advertising campaigns, but that later on turn out to be very successful and popular products, which is why I'm curious, hesitant but also not wanting to completely rule them out.

( ANY ) input from anyone that owns or owned one would be greatly appreciated.

Side note: I know they are made in china and that's ok as the components to every other company is also made there. China can manufacture some good quality stuff sometimes. Other than that, I don't know how they fit the same specs into a thermal and remain 20% or more, less expensive than others.

Grayboe Terrain for Rem 700 SA ******Sold

Stockys VG, Tikka sporter barrel, Olive web, new and unused
$465 shipped CONUS

*****Sold Trigger Tech primary independence, rem 700 with bolt release NIB

Cross posted

Would trade towards a Tikka Lite SS in 243, 22-250 (8 twist), or tikka CTR 308 SS

Here's some more resources.




I hope that they may be of some help to at least one person.

-LD

WTT/WTS
Glock 43x mos
Holosun EPS carry
Lower 1/3rd night sights
Professional Stippling w/ double undercut
Shield Arms mag release
Shield Arms 15 rd mag
TRex Arms AIWB holster
Factory case

Primarily wanting to trade for a 10.3-14.4” 5.56 upper
Mk18, URGI, Centurion, BCM, Geissele, ect…
Would take $800 cash, Venmo, Zelle
Price is shipped

if there is anyone on this board that owns or has used the Leica AB+ binos, I have a few questions that you may be able to assist with:
1. The manual indicates that the “main” button both turns on and off the internal electronics. And while it does indeed turn it on, I cannot seem to get it to turn off (I’ve tried a brief press and or a long press with no joy). Any suggestions?
2. I have paired it with my Kestrel and have the Balistic curve turned on in the AB+. Should I be able to see some of the Kestrel ballistic data in the bino, or does the bino simply transmit range data to the Kestrel?
3. When pairing with the Leica Ballistic Ap, I do not see any of the ballistic data in the Bino, is this the intended result?
I am new to these binoculars, and while I realize that my questions may be somewhat elementary, the manual is not terribly helpful and there is little if any info on the Internet regarding my questions.
Thank you in advance.

I see folks posting low SD's with 3 & 5 shot groups. How many rounds should be fired to get a accurate SD on your load?

Hi guys, this is my first post ever here in this forum.
I'm from Italy and AR15 are a topic with very few experts talking my language, so I sincerly wanna ask you.
I'm using a 12,5" .223 of an italian manufacturer with "his" Lothar Walther 1:8 and a 1-6 lpvo (PST 2 vortex) to play with steel plates at ~400m and sometimes even beyond.
This stuff is really fun and I enjoy learning all the things about ballistics, so I wanna go for a more performing setup without having it fully dedicated to this anyway.
I'm thinking to swap optic (going for a 2-10 pst2 vortex) and barrel:
Here in Italy we kinda have to marry ourself to a barrel 'cause it has to be registered regardless the lenght, so playing with customer service if something goes wrong can be a pain in the butt.
I wanna go with a 14,5 - 16" 1:8 match with a profile not too heavy, to gain a little more speed and I hope accuracy without losing too much portability;
I have access to
- 14,5 1:8 MRR (multi radial rifleing) sabatti blank and finished by an italian artisan (with sbn)
- 16 1:8 Wilson combat recon SS 1:8 fluted
- 14.5 faxon gunner match ss 1:8
- 16 BA Hanson Match ss 1:8
- Another Lothar Walther 1:8 sbn finished by the manufacturer of my current AR15.
- Buy an entire new ar15: Ruger MPR 1:8 16 spr profile.

I will use FIOCCHI 62 for 90% of the times, and 69smk loaded by me for the rest 10%.
Right now my AR15 print 2moa with 62fiocchi and 1.5moa with 69smk (note I'm using only a 6x lpvo at the moment), Always 10shot groups.
- I wish my future setup will be able to make 1moa or sub with 69smk and 1.5moa with 62fiocchi.

I have seen with my eyes MRRs printing 1 to 1.5moa with 62fiocchi, but it seems they dont like 69 and 77, producing 1.5moa also (1:8).
I have also seen a lot of MRR having quality control issues.

I know faxon and BA have also quality control by "volume of fire" and I dont know if I want to take the risk of a non-shooter and dealing with their customer service in another continent. But i've seen a YT video of a guy doing 1moa with a faxon match (18" spr and not 14.5 gunner as listed)

I've seen with my eyes rugers mpr printing 1.5~ with 55 and 62 fiocchi, but I dont know if it's the best choice.

What do you suggest? Wilson Combat? They seems to have good quality control and track record.
I could get WOA but we import them only with a very VERY heavy spr profile and 1:7 twist. So I really hope Wilson combat recon could be as good.
Thanks

I have packs of 500 all same lot. shipped 215 per 500

Then you also need to own and carry a MP5 cuz it’s not how you raise them.

Login to view embedded media

Looking for a set of Vision A.I. Grip panels.

I have 2 of these

If you want one, PM me and I'll drop it in the mail

Faxon 12.5 6mm arc ar15 barrel excellent condition. $125

Beware of Chris.Creedmoor
Trying to sell item someone else listed

Selling a rare and discontinued Spuhr 4003B. This mount features the same specs as the popular 4002 (1.5" height, 34mm rings, 0moa cant) but has a wider spacing between the rings. It looks great on larger scopes, like an ATACR 7-35. The mount will come as shown.

SOLD

No trades please.

For basically only HD would you put any money into a 10.3/10.5 300 Blackout barrel? I want to run a 9.3 Geissele MK8 rail so really a 10.3 barrel would be the best option.

I see a BA Hanson is offered in 10.3 and the price is sub $200. But I feel so dirty paying more for a rail than the barrel. Would you guys spend a little more to get a better barrel? I never plan to shoot it at distance really and it will just be suppressed (now that Trump is back in office) for my wife's HD gun.

So mainly 110-125gr supers and some subs just for fun.

Vitamin D3, cheap and works well, according to this VA study:

Login to view embedded media
Watch and pass on, particularly to anyone who is feeling down.

Updated - reduced price to $700

I have a lightly used KRG Bravo frame that I want to sell. I have multiple accessories for it as well. I had an Impact Precision 737R action mounted in it.

For sale:
KRG Bravo Frame
Length of Pull Spacers
1 Length of Pull heavy spacer
ARCA Enclosed For end
Enclosed For end T-slot weight
Tool-less Butt Pad Height Mechanism
Bravo Grip Weight
Bravo Rear Weight Set
2 round Quiver

I am asking $700 for everything. (over 1200 out of pocket to pick it up originally).