boeing's starliner just undocked from the ISS and its coming back to earth [maybe] unmanned .......so run or dig a hole

Sealed 100 count bag of 6mm creedmoor starline brass $40 shipped. SOLD

Putting up a Tangent Theta 5-25x56 with Gen2XR for sale or trade. I intended to keep this scope for a while to put on a future build, but I have a setup back from the smith early that requires a different optic so this must go. The scope is in great condition with a few minor blemishes on the turret caps. Lenses are flawless. Comes as shown in factory box with sunshade and manual.

Will sell outright or trade.

sold

Looking for the following specific scopes but will consider all offers. All trades will be plus cash - will not do straight trade:
- Nightforce NXS 3.5-15x50 (prefer mil-based reticle)
- Leupold Mark 5 3.6-18 FDE (prefer mil-based reticle)
- Leupold Mark 6 3-18 ECOS-O
- open to all other NF, S&B, Vortex, etc high-end optics.

Selling a Geissele Super 700 trigger for a Remington 700. This trigger was installed on a Vudoo 22lr rifle, but never shot. In attempting to dry-fire with the Vudoo, I found that this trigger wasn't compatible with the Vudoo (at least without messing with the adjustments, which I didn't adjust anything).

I have since installed this trigger on my Remington 700 action and dry fired it about 30 times. This trigger works perfectly on my Remington 700 action.

This trigger has a few marks on it by the safety from installation, and a few marks on the sear from cycling / attempting to dry fire on the Vudoo. All the marks can be seen in the pictures. Asking $250 shipped. Can take PayPal FF (no notes), Zelle, or USPS Money Order.

Crossposted on ar15.com with the same username (with 68 positive transactions over there)

15.3” factory upper FDE
MARS-H FDE FACTORY
Geissele SSA-E
Geissele AB CH
20” 6.5CM 100 rounds through barrel W/Surefire brake
16” SS .308 barrel new W/Surefire FH
Ergo grip
B5 SOPMOD GEN 1 stock
Magpul PRS STOCK
LMT Torque wrench
Two/2 LMT SA BCG (one is brand new)
2x spare parts kits
1x Magpul 25 round magazine.

Optics not included. 100 rounds of Factory Federal GMM 130gr Berger through this.

$3700 OBO Shipped. Will be shipped from FFL to FFL.

There is absolutely nothing I want in trades. I just don’t have the time and this gets shot very very little over the last year.

$325 Shipped

30 boxes (600 rounds) of Hornady Black 308 168gr
All matching lot numbers.

$650 shipped for all 30 boxes.

PayPal FF, Venmo or Zelle

Arken EPL-4 6-24x50 FFP
VHR Mil Reticle
Comes with box and zoom lever as shown
$275 shipped

Moving from 6 creed. I have 25 boxes (500rds) of Hornady match 108 gr ELD. Asking $750shipped for all of it. If you’re wanting a smaller amount, PM me with offers but I’d prefer to sell this all as one unit.

I can do FaceTime or send more pics. Just PM me. Prefer pp, Zelle. Venmo. PM offers.

Thanks.

I have 6 cases (1200rds) of FGM 105 gr OTM Berger Hybrid. I bought all this about a year or so back. Sliding away from 6CM. Part number is GM6CRDBH1. I can video FaceTime or send more pics. Boxes are ready to ship.

Target sports has them in stock for $375 per case plus tax etc.

Asking $300 per case (200rds) shipped. PM offers. I accept PP, Zelle. Venmo. Thanks.

I was wandering if anyone has reloaded any 175 smk in a 300 win mag. I'm getting ready to do some playing around and thought about loading the 175's in a 300 since I have a bunch and shoot them in my 308.

I am looking at using two powders to start out with. The Sierra manaul has 71.6grs of IMR 4831 as their accuracy load. I also am going to try using 76.5 grs of H1000. Both will be pushing the bullet around 2900 to 3000 fps.

I'll set the bullet to be about .010 from jam lenght as a start.

If you guys have loaded a 300 with the 175's let me know what your findings have been.

Looking for one of the nightforce branded T handle Torque wrenches in 68 pounds. Thanks!

What’s up guys, I’ve got a Mesa Precision, now known as Pure Precision, barreled action I am looking to sell.

It’s based on the Crux short action, 24” Proof Research carbon fiber sendero barrel blank chambered by Mesa/Pure and a triggertech diamond flat.

Price is 1850 shipped, I think that is fair for a well made carbon setup. Not looking to trade at the moment. Thanks!

FYI- I had to screenshot the side profile photos because they were too large to post, so if you want to check out the higher resolution pics just message me.

Looking at the current line up of Vortex Scopes it seems as though they’ve come out with new products that compete directly with the PST gen 2, with a hole right above where the gen 2 currently sits as the razors have bumped up a smidge.

It seems the strike eagle line has taken over that spot a bit and the strike eagle LPVO line definitely has started to overshadow the gen 2 1-6 options.

Is there a new viper PST Gen 3 line coming soon?
I’ve been wondering this for a few months now… I just have no clue.

Can someone measure the weights that slide in the spigot port. I'm wanting to make some out of brass.

I have an Aimpoint H34L red dot which has a 34 mm round bottom tube. there are no flats on the bottom too use a wedge leveler. there are also no flat surfaces on the top. if I remove the battery compartment lid on the side there is a flat surface.

How can I level this scope? I am trying to use a Spuhr one piece mount .

TTS customs slide cerakoted black by generational guns of Iowa.

Tyrant ITTS trigger

Custom stippled frame with double undercut and more done by generational guns in bondurant iowa.

Suarez street comp

Vickers slide release

Shield arms mag release

Recover tactical rail

Sandstorm precision magwell

Olight Pl-2

Tuxton tactical IWB holster(can charge light while in holster)

OD green Chimera holster IWB/OWB

True precision threaded match barrel

Wolf 5lb firing pin spring

TTI grandmaster connector kit.



Will include one s15 mag and one with +5 extension



Would like to keep my holosun but willing to negotiate it for extra.



I have roughly 800-900 rounds through this. It’s a great pistol. Just decided I want something else now.



The ONLY trade I am looking for on this is an alpha foxtrot S15 1911 threaded barrel and optic ready. If you know where I can get one, Info would be much appreciated.



1300 shipped to your ffl

Putting up for sale a few scopes I don’t need anymore. I picked this S&B up from here a few months ago, so I don’t know the entire history of it. It’s a S&B Pmii 3-20x50 US with the MSR reticle and DT27 turrets with MCT. It did have the DT36 turrets but the previous owner sent it in to SB and had the DT27 installed. It comes with the extra DT36 turret as well. Overall it’s in good shape, a few marks from use but nothing major. The elevation turret lock has a ding on it, there’s a few on the body and some slight ring marks, and the objective cap has the bottom filled down to clear the barrel. I tried to get pics of it all. Glass looks to be clear to me. Happy to answer any questions.

$2550 $2450 $2400 $2350 shipped conus. PayPal F&F preferred but can accept other methods. Insurance on buyer if wanted.

Two Nightforce scopes for sale. Both are in excellent condition and come with boxes.

1-8x24 ATACR FC-DMx C653 SOLD

2.5-20x50 NX8 Mil-C C623 SOLD

Trigger Tech Diamond - R700 - Black Curved Trigger

$250 shipped

I’m planning on starting to dabble in the .22lr competition world. I’ve wanted to for a long while but have been a little apprehensive to start. I decided to go for it and jump in with both feet. So here’s my build specs followed by a couple of questions.

Vudoo V22 action

Krieger MTU 22” barrel threaded and capped

Triggertech Diamond 2 stage trigger

Gray Ops one piece scope mount

Kahles K25i optic

MDT CKYE-POD Gen 2 Single Pull Short/PRS - Bipod

MPA Matrix Pro 2 chassis

So I’m also considering the MDT ACC Elite chassis. Both are great options but there’s something about the Matrix that I really like the look of.

Question 1 is if anyone has a photo of the Matrix Pro with a 22” barrel? Just want to see how it looks in the chassis. Not sure if it’s going to look too short.

Question 2 is if I’m using a 22” MTU barrel with the new “lighter” Matrix Pro 2 rear end (1 lb lighter), do you think it will be heavy enough up front that i shouldn’t need too much weight to balance?

Question 3 will a competition chassis like the Matrix or ACC give me that much more of an advantage over a traditional stock like a Foundation or a McMillan?

I'm pretty sure I know what the answer is going to be but I wanted to run it by the Collective Mind for input.

I've been considering going to a Trijicon red dot but man it's going to be expensive. Figure around $650ish for the red dot, another $150ish for the milling. And I'm not even sure how well I'd adapt to a red dot. I'm familiar with the saying "Buy once, cry once."

Or, I could try a Crimson Trace Laserguard. I've watched youtube videos of those things and while they maybe useful I don't like how they're moving erratically all over the target. But I figure they must have some virtue in them because the military uses them on their rifles. Yes, I know, shooting a rifle is a lot different than shooting a handgun.

What are your thoughts on this choice? Thanks.

Listing some of my last right handers, these are harder to let go of.

Short Action Custom built barreled action. Tikka T3X 6.5 creedmoor. Cerakoted a dark blue, has a few minor handling marks.

20” Bartlein 1:8 twist medium Palma threaded 5/8-24 with seamless brake

McMillan Mountaineer stock with mountain tactical bottom metal.

Trigger tuned by SAC and it’s best I’ve felt. Breaks at around 1 pound.

Talley 30mm rings

I bought as a barreled action, po stated less than 100 rounds and I only tested for function.

Bipod not included

$2000 shipped PP FF/venmo/check til clears

Selling a brand-new unopened tactical smart watch from Ataclete. It was a gift and I have too many watches. It's still in the plastic, never opened. Here's a link to what it is:


$old!

Venmo preferred.

Picture from website:


Picture of unopened box from my kitchen:

I have a brand new, never used, still in the burlap suppressor cover for a TBAC Ultra 7. Black in color. You can see the cover inside the burlap but didn’t want to cut the tag off and open it fully.

$250 shipping included. PayPal F&F, Venmo and Zelle accepted.