B5 Precision Buttstock
- Thread starter elmuzzlebreak
- Start date
I really do hope this can be a solution to the ridiculously short cheek piece of the magpie PRS stock.
This is all I’ve found so far
Features:
– Internal Tensioners optimize fit for Carbine or AR10 Reciever Extensions
– Limited rotation, steel, ambidextrous Quick Disconnect sling mount
– Two ambidextrous fixed sling mounts
– Nose shortened allowing for single-point sling use while stock is collapsed
– Adjustable buttons and cheekpiece
– Quick thread precise adjustment
– M-Lok attachment system
– Length: 8.5-9.2 in
– Height: 4.35-4.78 in
– Weight: 20.65 oz
B5 Systems Debuts New Precision Stock At USASOC Sniper Competition | Soldier Systems Daily
See the new Precision Stock from B5 Systems at the USASOC Sniper Competition, today and tomorrow at Fort Bragg, North Carolina. Features: - Internal Tension ...
soldiersystems.net
Features:
– Internal Tensioners optimize fit for Carbine or AR10 Reciever Extensions
– Limited rotation, steel, ambidextrous Quick Disconnect sling mount
– Two ambidextrous fixed sling mounts
– Nose shortened allowing for single-point sling use while stock is collapsed
– Adjustable buttons and cheekpiece
– Quick thread precise adjustment
– M-Lok attachment system
– Length: 8.5-9.2 in
– Height: 4.35-4.78 in
– Weight: 20.65 oz
I see this as a good stock for a Mk12 style rifle. The LOP is 9-13.5. That means for the majority of us it will be at full or near full extension. Compare to the magpul however which starts at like 13” or so
As useful as it may appear, are you also insinuating that it looks like a bidet??
Hi,
Ok so we have different elephants in the room, lololol....
I referring to elephant as what in the world is the toilet doing in the picture
Sincerely,
Theis
Ok so we have different elephants in the room, lololol....
I referring to elephant as what in the world is the toilet doing in the picture
Sincerely,
Theis
Hi,
Ok so we have different elephants in the room, lololol....
I referring to elephant as what in the world is the toilet doing in the picture
Sincerely,
Theis
Looks like an unfortunately placed ad, but still funny!
?♂ Can’t control who pays to advertise on recoilweb and I was too lazy to edit it.
So.....
Is the water pressure adjustable on the bidet?
Asking for a friend.
I like the stock in the OP.
Is the water pressure adjustable on the bidet?
Asking for a friend.
I like the stock in the OP.
The quick LOP adjustment is nice as is the ~8 oz weight reduction compared to the 3rd gen Magpul PRS. If the RE tension adjustment works well then it might be worth a try.
Hi,
Ok so we have different elephants in the room, lololol....
I referring to elephant as what in the world is the toilet doing in the picture
Sincerely,
Theis
FIFY
B5 has been claiming it'll be cheaper, but then said street price is like $230, so it's actually more than what you can typically buy the Prs for. It's kinda ugly, but I'll buy one just for the color (coyote brown)
Hi,
Ok so we have different elephants in the room, lololol....
I referring to elephant as what in the world is the toilet doing in the picture
Sincerely,
Theis
That's where AK's and that stock go.
That's not what I'm getting from that graphic along with this one:
Looks to me like the bare stock itself measures 8.5" all collapsed, up to 9.2" with the pad extended. To that you need to add about 3" for trigger to end of receiver for length of pull measurement. So I'm getting about 12" to a whopping 16.25" for LOP.
AgreedThat's not what I'm getting from that graphic along with this one:
Looks to me like the bare stock itself measures 8.5" all collapsed, up to 9.2" with the pad extended. To that you need to add about 3" for trigger to end of receiver for length of pull measurement. So I'm getting about 12" to a whopping 16.25" for LOP.
I've seen a bunch of influencers on the gram with them but nothing commercial. Don't worry they'll probably hype it up again at SHOT.
Victory First seems to have them in stock. Not sure what their shipping time frames are.
victory-first.com
B5 Systems Precision stock
The new B5 Systems Precision Stock is a fresh look at an adjustable stock for a standard Mil-Spec carbine receiver extension (buffer tube) or an A5 receiver extension. The stock utilizes the gross adjustment holes on your Mil-Spec extension and then has tool-less comb height and length of pull...
victory-first.com
Victory First seems to have them in stock. Not sure what their shipping time frames are.
B5 Systems Precision stock
The new B5 Systems Precision Stock is a fresh look at an adjustable stock for a standard Mil-Spec carbine receiver extension (buffer tube) or an A5 receiver extension. The stock utilizes the gross adjustment holes on your Mil-Spec extension and then has tool-less comb height and length of pull...
I just ordered one for a build I am putting together shortly so we will see what the timeline is for shipping soon.
Showed up to my door today. I am waiting on my FFL to get the reciever set in for me so it won't be mounted for a bit. Threw it on a buffer tube and it seems solid.
Attachments
Nice, how much wobble is there when u extend it out? I am wondering how it compares to a magpul that has the cam lock lever like the acs, ctr ex.
There isn't much wobble thanks to the tension system they use, however the farther you extend the stock the more wobble there is. I think all of the small wobble will get taken up when you shoulder the rifle and apply pressure. Once I get the rifle all set up and play with it I think a possible solution if I find that I have the LOP set out farther on the tube would be to swap out my carbine buffer tube to a A5 to get a little more length and hopefully less wobble farther out.
Awesome. Definitely post once it's together. Victory is already out of stock for all models. . . I just wonder why they have it but B5 doesnt even have it on their website. Oh well.
Interested in this as well - I nearly picked one of these up months ago, but couldn't quite justify the purchase.
There was one in the PX not to long ago.
ETA......looks like it’s still available unless not updated
Accessories - PRICE DROP b5 precision rifle stock fde $150
WTS b5 systems precision rifle stock. It’s in perfect condition only mounted never used. Was Asking $170, now asking $160 shipped conus. I accept PayPal gift or you pay the fees. Thanks
www.snipershide.com
Thanks for the heads up man. I’ll jump in and see if it’s still available.There was one in the PX not to long ago.
ETA......looks like it’s still available unless not updated
Accessories - PRICE DROP b5 precision rifle stock fde $150
WTS b5 systems precision rifle stock. It’s in perfect condition only mounted never used. Was Asking $170, now asking $160 shipped conus. I accept PayPal gift or you pay the fees. Thanks
Just FYI I believe that they make two different versions - a 5.56 version and a 7.62 version - from what I can tell, the only difference is the length of the adjustable comb on the stock to accommodate a charging handle...
