Who of you bullshitters claims 1/4 MOA all day? Show us all you proof?

Barelstroker · Mar 18, 2024

So, we seem to have a never ending supply of, so called, shooters who think that 1/4 MOA is perfectly reasonable. Lets see the proof. I want to see BRE results over 300 rounds & F Class over 300 rounds. Show me the results or cowards you must be.

Supersubes · Mar 18, 2024

Are you ok?

NiteQwill · Mar 18, 2024

This isn't the Bear Pit

MarshallDodge · Mar 18, 2024

Barelstroker said:
So, we seem to have a never ending supply of, so called, shooters who think that 1/4 MOA is perfectly reasonable. Lets see the proof. I want to see BRE results over 300 rounds & F Class over 300 rounds. Show me the results or cowards you musty be.

Why is this so important to you?

Barelstroker · Mar 18, 2024

MarshallDodge said:
Why is this so important to you?

Just tired of the " my rifles 1/4 moa rifle" all the time bullshit or 1/2 MOA for that matter.
I've been reading this bullshit for years & I've had enough.
Anyone who claims this bullshit has to show a 10 shot group or fuck off, not interested in your garbage.
Give me one 10 shot group & I'll believe you for the next 100 shots.

Schütze · Mar 18, 2024

Can I cover the “flyer” with a coin, measuring tape or caliper?

Barelstroker · Mar 18, 2024

Schütze said:
Can I cover the “flyer” with a coin, measuring tape or caliper?

No, nothing so fancy. Just give me one ten shot group under 1./2 Moa & all is well.

JM4590 · Mar 18, 2024

If you don’t count the powder burns on the paper….
I can do that shit all day long!

Fig · Mar 18, 2024

D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷ · Mar 18, 2024

Can we get on with important business now?

NoDopes · Mar 18, 2024

Barelstroker said:
Just tired of the " my rifles 1/4 moa rifle" all the time bullshit or 1/2 MOA for that matter.
I've been reading this bullshit for years & I've had enough.
Anyone who claims this bullshit has to show a 10 shot group or fuck off, not interested in your garbage.
Give me one 10 shot group & I'll believe you for the next 100 shots.

Tell me you don't shoot 6.5cm without telling me you don't shoot 6.5cm

Supersubes · Mar 18, 2024

Barelstroker said:
Just tired of the " my rifles 1/4 moa rifle" all the time bullshit or 1/2 MOA for that matter.
I've been reading this bullshit for years & I've had enough.
Anyone who claims this bullshit has to show a 10 shot group or fuck off, not interested in your garbage.
Give me one 10 shot group & I'll believe you for the next 100 shots.

The mean radius vs group size was a fine topic. Easy answer imo, but perhaps worth some discussion for those that dont know what you're talking about. After zero discussion on the topic takes place, you make this thread. This place has argued “1/4 MOA all day long” 1000 times, and nobody cares that it upsets you.

sirhrmechanic · Mar 18, 2024

Yeah… call us when you can do this… 3/8”
Dot 500ish times without a miss.

Until then, I’ll claim whatever I want.

Besides… it’s all the rifle. I don’t even have to do my part.

Sirhr

Racer88 · Mar 18, 2024

Schütze said:
Can I cover the “flyer” with a coin, measuring tape or caliper?

That was at 300 yards, BTW. Factory ammo. RPR 6.5 Creedmoor.

Admittedly, I don't do that "all day every day."

But it shows me what is possible.

sirhrmechanic · Mar 18, 2024

And where is Mike from TacOps…

He does it all day long…. With different rifles every time!!

@MikeRTacOps

Sirhr

PatMiles · Mar 18, 2024

I'm your Huckleberry!

diverdon · Mar 18, 2024

I think we all know there are a couple of cool kids who can really shoot. And many who wish to assume the mantle but lack the equipment or skills to actually deliver.

The thing to remember is the first group is known and has little reason or temperament to respond to challenges like the opening post.

kenny1773 · Mar 18, 2024

I have to ask the OP, what is your typical 10 shot group size at 100 yards?

some info about your rifle, caliber, and if you reload or shoot manufactured ammo would be good info too

sirhrmechanic · Mar 18, 2024

kenny1773 said:
I have to ask the OP, what is your typical 10 shot group size at 100 yards?

some info about your rifle, caliber, and if you reload or shoot manufactured ammo would be good info too

C’mon man… dead eye!

Sirhr

eprom · Mar 18, 2024

I was also very sceptical about all those "claims" of 1/4, even 1/2 moa groups back in the day. I thought they were all full of shit.

Until, I built my first decent precision rifle with quality components, took several courses, lot of dry firing practice, improved my reloading process and now I can print 1/2 moa groups (10 shots groups) at 300 meters almost all day long. I must be in a very bad day if I do worst.

Of course there is people full of shit, especially in forums, but it does not mean it's dawn impossible. I think, 1/4 is way harder past 300 through, and probably requires way more 'technical work' and very solid fundamentals. But still, there is probably some shooters out there that can do it consistently.

msgriff · Mar 18, 2024

Somebody is waking up next to the "last call" fat chick.

M4orturnate · Mar 18, 2024

this was actually 6 shots at 100y and is pretty standard accuracy for my custom rifles.

Schütze · Mar 18, 2024

M4orturnate said:
View attachment 8375490 this was actually 6 shots at 100y and is pretty standard accuracy for my custom rifles.

And now remove the cartridge….

Racer88 · Mar 18, 2024

M4orturnate said:
this was actually 6 shots at 100y and is pretty standard accuracy for my custom rifles.

So you missed 6 times!?? LOL!

That's crazy right there!

roostercogburn98 · Mar 18, 2024

D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷ said:
View attachment 8375417

Can we get on with important business now?

I’d still fuck it up

168BTHPM · Mar 18, 2024

I shot this 5 shot group year before last at 300 yards. Defiance Deviant 338, Obermeyer 34" 5R tight bore 1:12, .338 Lapua, 285gr ELD-M. I took the KAC bipod off and put an Atlas 5H bipod on it when I shot the group. Slightly bigger than 1/4 MOA. I have since replaced the S&B 12-50 with a March Genesis 6-60.

candyx · Mar 18, 2024

1/4 moa is alright I guess , I personally would have someone check my barrel to see if something was bent.....

kenny1773 · Mar 18, 2024

seems to be a lot of you bitches that can't count, use both hands and all fingers

Where are the 10 shot group pictures? I am 100% sure they exist.

10 is the number after the number 9 and before the number 11, if you are somewhere around 5, you aren't even fucking close

fuck people have gotten dumb

I have an amazing 3 shot group, should I post it?

HELL NO

Mooseknuckles · Mar 18, 2024

This is 2 sight in shots and then a 10 shot group at 100.

Gunfighter14e2 · Mar 18, 2024

sirhrmechanic said:
Yeah… call us when you can do this… 3/8”
Dot 500ish times without a miss.

Until then, I’ll claim whatever I want.

View attachment 8375421

View attachment 8375422

View attachment 8375423

View attachment 8375424

Besides… it’s all the rifle. I don’t even have to do my part.

Sirhr

You a Toepperwein?

cas6969 · Mar 18, 2024

Look, if you're trying to make us feel bad about your lack of shooting skills, it's not going to happen.

Short-bus · Mar 18, 2024

Barelstroker said:
So, we seem to have a never ending supply of, so called, shooters who think that 1/4 MOA is perfectly reasonable. Lets see the proof. I want to see BRE results over 300 rounds & F Class over 300 rounds. Show me the results or cowards you must be.

I shoot one hole 1 shot groups all day, every day, with my savage topped with a Barska sniper scope/red dot/laser combo.

Branden

Bryan Austin · Mar 18, 2024

Close enough! 3.15 MOA @ 100 yards
40 shots (black dots) if you include the previous 10 shot target.

sirhrmechanic · Mar 18, 2024

Gunfighter14e2 said:
You a Toepperwein?

No but I do own Tupperware…

Check my Ad Topperwain challenge in the Rimfire section.

So far no one has taken it up and posted pic!

Sirhr

sirhrmechanic · Mar 18, 2024

Is a can of Dinty Moore at a mile considered 1/4 MOA?

Because me and my dog can do that all day.

Or at least we could have done it but the contractors shot my dog.

Sirhr

diggler1833 · Mar 18, 2024

sirhrmechanic said:
Yeah… call us when you can do this… 3/8”
Dot 500ish times without a miss.

Until then, I’ll claim whatever I want.

View attachment 8375421

View attachment 8375422

View attachment 8375423

View attachment 8375424

Besides… it’s all the rifle. I don’t even have to do my part.

Sirhr

^^^ That is a frigging cool idea.

I'm going to do a bunch of these. But it going to be dicks. Then I am going to start sending them to people who start ghey threads.

At least this was moved to the Pit.

Threadcutter308 · Mar 18, 2024

sirhrmechanic said:
Is a can of Dinty Moore at a mile considered 1/4 MOA?

Because me and my dog can do that all day.

Or at least we could have done it but the contractors shot my dog.

Sirhr

And.........you filed down all yer firing pins

Gunfighter14e2 · Mar 18, 2024

sirhrmechanic said:
Or at least we could have done it but the contractors shot my dog.

No they eat your dog with fava beans, and washed it down with a nice Chianti. Still have the shovel from digging the hole the bones are in out past, Terlingua.

plh · Mar 18, 2024

I would but I'm at work.

45-90 · Mar 18, 2024

My 6 dasher shoots good with a variety of bullets and powders. In this test 100 yd 5 shot groups.
I shot 13, 5 shot groups with different powders and bullets. that averaged .313" that day... not quite 1/4" all day.
Groups in the .2" help bring down the average.
The rifle may do better, but not the operator.
The group with the one flyer high is probably the old man behind the gun, who has macular degeneration in the shooting eye, and it aint getting any better with eye injections that cost $4000 per injection.
Old age sucks and my shooting like everything else is going south, with each passing day.
I have to have good glass and bright sun to even see the orange dot... on overcast days just center the whole plate, because the dots become invisible. And I can't see the bullet holes, so I have no idea if I'm shooting a good group, until go up to the target and see it with my left eye.

oneshot86 · Mar 18, 2024

1/4 inch???
What kind of slackers are you guys.
I had to rename my rifle, the stacker.

Every damn time, whether I use my left or right eye, dead center, stacked all in one hole

Threadcutter308 · Mar 18, 2024

oneshot86 said:
1/4 inch???
What kind of slackers are you guys.
I had to rename my rifle, the stacker.

Every damn time, whether I use my left or right eye, dead center, stacked all in one hole

Yeah, but if'n yew didn't shoot ten rounds, it don't count..............

Dead Eye Dick · Mar 18, 2024

As I always say, my Weatherby Vanguard in .25-06 can put ten shots in one hole at 1000 yards all day long. Just ain’t sayin how big the hole is. Well here is the hole…the Pacific Ocean

oneshot86 · Mar 18, 2024

Threadcutter308 said:
Yeah, but if'n yew didn't shoot ten rounds, it don't count..............

Hey, dat not nice.

Bullfrog08 · Mar 18, 2024

I shoot 1/4" groups all day long......when the rifle does its part!

I also have 53 bow kills, and do concrete as a hobby. Oh, and I can bench press Dirty D's GF!

Did I mention I handed Chuck Norris his first loss in a fight.

Threadcutter308 · Mar 18, 2024

oneshot86 said:
Hey, dat not nice.

mi650 · Mar 18, 2024

Don't think I've ever had a group larger than .7" with this rifle, 5.56 RPR with a VX-3i 8.5-25 on it in a Nikon Black mount. Keep thinking about putting a better scope on it, but really don't want to take a chance on messing it up. Before I shot this group, it was already on my 'Do Not Sell!' list. And yea, this group is a fluke. I know I'll never duplicate it.

But it was witnessed, a buddy was watching thru a spotter. I looked back at him after the 4th shot, both of us fully expecting me to pull the 5th.

Oh, and this rifle started out FUBAR'd!! Bought it at my LGS, got it home and TRIED to remove the brake. Turned out to be cross-threaded from the factory, threads were beyond saving. LGS sent it in for me, Ruger re-barreled it. They sent it back with the brake in a baggie.

Works out to .0984 MOA, if my math is correct.

Another day, probably more realistic.

Maybe I'll try an 'MOA All Day' target with it this summer.

oneshot86 · Mar 18, 2024

You really do need to practice more, that's garbage shooting

Srgt. Hulka · Mar 18, 2024

My John Hancock;

Five shots 100 yards;

Five shots 1000 yards;

And I'm nowhere near as serious as a most of you guys.

roostercogburn98 · Mar 18, 2024

168BTHPM said:
I shot this 5 shot group year before last at 300 yards. Defiance Deviant 338, Obermeyer 34" 5R tight bore 1:12, .338 Lapua, 285gr ELD-M. I took the KAC bipod off and put an Atlas 5H bipod on it when I shot the group. Slightly bigger than 1/4 MOA. I have since replaced the S&B 12-50 with a March Genesis 6-60.
View attachment 8375522

View attachment 8375520

That AI gets free groups. Don’t even have to shoot it

Having trouble using the site?

Who of you bullshitters claims 1/4 MOA all day? Show us all you proof?

Major Hide Member

Heathen

Best to jump high, and far!

At the Reloading Bench

Major Hide Member

Major Hide Member

Major Hide Member

Private

Tenor in the howler choir

Banned x2 🤪 / Bear Pit Super Mod

Two Star General

Heathen

Command Sgt. Major

Firearms Pedant

Command Sgt. Major

Private

Constitutionalist, by choice

Major Hide Member

Command Sgt. Major

Sergeant of the Hide

Major Hide Member

Major Hide Member

Major Hide Member

Firearms Pedant

Fudd gun collector extraordinaire

Werepig

Private

Major Hide Member

Major Hide Member

Hunter/trapper of Remora's

Keeps Mr. Dead in his pocket

customguncoatings.com

Private

Command Sgt. Major

Command Sgt. Major

World's Okayest Rancher and Hog Hunter

Mr. Sugar Tits to you

Hunter/trapper of Remora's

Sergeant

Major Hide Member

Attachments

Full Member

Mr. Sugar Tits to you

Command Spec 4 (formally known as Wiillk)

Full Member

Old Salt

Mr. Sugar Tits to you

Undergrad Rifle Shooter

Full Member

Lighten Up Francis

Fudd gun collector extraordinaire

Similar threads