Thoughts on the Aero Precision SOLUS ?

kthomas · Jul 24, 2024

FuhQ said:
So, you don’t believe in harmonics? Because a particular load built to the same specs every time, at a similar velocity should produce a consistent result…

So, what would you call a range of certain powder charges that continuously produce similar results, where the results were adverse both lower and higher then that particular range of charge weights? That sure sounds like a harmonic (velocity) node to me…

I think you are making a lot of assumptions in regards to inputs in the internal ballistics phase and how those inputs affect external ballistics. I also don't think you understand the complex level of testing and sample size that would be required to determine the conclusions that you are.

Anyways, back to the Solus...

FuhQ · Jul 24, 2024

kthomas said:
I think you are making a lot of assumptions in regards to inputs in the internal ballistics phase and how those inputs affect external ballistics. I also don't think you understand the complex level of testing and sample size that would be required to determine the conclusions that you are.

Anyways, back to the Solus...

And I think I’m right, you don’t want to admit it, and are grossly over complicating something that is much more simple than BR and comp shooters are willing to admit. They want everyone to think they have some sort of voodoo magic formula, when consistency and quality of both rifle and reloading components, and your reloading practices, is more important than anything. But we’ll agree to disagree.

I agree with you on one thing… Let’s get back to the Solus discussion. And I’ll stick with my unscientific and uneducated method that has never let me down in 20 years, and repeatedly produces sub-1/2 MOA groups, if the rifle is capable of it.

kthomas · Jul 24, 2024

FuhQ said:
And I think I’m right, you don’t want to admit it, and are grossly over complicating something that is much more simple than BR and comp shooters are willing to admit. They want everyone to think they have some sort of voodoo magic formula, when consistency and quality of both rifle and reloading components, and your reloading practices, is more important than anything. But we’ll agree to disagree.

Actually, we agree a lot on this. My reloading process is super simple. However, I don't waste any time chasing "nodes". Producing 1/2 MOA groups is easy, and you don't need any "nodes" to do this.

FuhQ · Jul 24, 2024

kthomas said:
Actually, we agree a lot on this. My reloading process is super simple. However, I don't waste any time chasing "nodes". Producing 1/2 MOA groups is easy, and you don't need any "nodes" to do this.

I don’t chase them, but when I find one in my ladder test work ups, I work within the node to pinpoint my best and most consistent loads.

There’s been plenty of times, like with the factory barreled .308 Win Solus I have, that I was chasing consistent groups, but had to scrap it and start over 3 times before finding something that worked because it was ridiculously picky. One thing I love about quality aftermarket barrels is they tend to be much more forgiving, if the machine work was done properly.

FuhQ · Jul 27, 2024

New video up shooting some steel gongs @ 300 with the Aero Solus .308 Win and the Otter Creek Hydrogen-L.

TicTacTex · Jul 28, 2024

ARShooter91 · Jul 30, 2024

TicTacTex · Jul 30, 2024

Guess I’ll be picking up another solus.

ARShooter91 · Jul 30, 2024

Solus pistols 15% off with code PISTOL.

I think I'll wait for the bolts but may get a 300blk pistol. Mainly want to do a 223 rifle, perhaps I'll do a 6arc instead

FuhQ · Jul 30, 2024

ARShooter91 said:
Solus pistols 15% off with code PISTOL.

I think I'll wait for the bolts but may get a 300blk pistol. Mainly want to do a 223 rifle, perhaps I'll do a 6arc instead

They havnen't shipped mine yet... Maybe I can get them to issue the discount...

TicTacTex · Jul 30, 2024

FuhQ said:
They havnen't shipped mine yet... Maybe I can get them to issue the discount...

If not, just cancel it and place a new order.

FuhQ · Jul 30, 2024

TicTacTex said:
If not, just cancel it and place a new order.

Might have to... I'll call them tomorrow at work. LOL

Hondo64d · Jul 30, 2024

I bought one of the Hunter models in .308 and everything about it seems quality, but it shoots like garbage. Groups from 1.5 to 2.5” with handloads that shot in the .4s in a previous Criterion barrel rifle.

I’ve pretty much narrowed it down to the barrel. Put the Solus barreled action in an MPA chassis and it still shot poorly. Put one of my known good shooting barreled actions in the Solus stock and it still shot good. Tried two different scopes with both shooting poorly.

So, while I would not hesitate to use their action, which I really like, I could not recommend their barreled action or barrels.

John

Mooseknuckles · Jul 30, 2024

So far my Creedmoor has shot well. Put 20 rounds through it so far with a random load.
I used prime 1x brass with 41.8 grain of h4350, 147 eldm and cci200 primers. It shot a .837 5 shot group at 100, velocity is 2694 avg.

srt-4_uk · Jul 30, 2024

Hondo64d said:
I bought one of the Hunter models in .308 and everything about it seems quality, but it shoots like garbage. Groups from 1.5 to 2.5” with handloads that shot in the .4s in a previous Criterion barrel rifle.

I’ve pretty much narrowed it down to the barrel. Put the Solus barreled action in an MPA chassis and it still shot poorly. Put one of my known good shooting barreled actions in the Solus stock and it still shot good. Tried two different scopes with both shooting poorly.

So, while I would not hesitate to use their action, which I really like, I could not recommend their barreled action or barrels.

John

So make a load for that gun?

FuhQ · Jul 30, 2024

srt-4_uk said:
So make a load for that gun?

That would make too much sense...

Hondo64d · Jul 31, 2024

srt-4_uk said:
So make a load for that gun?

Also tried 178gr ELDx w/ several different charges of Varget. Shot worse than the other. In my experience, any barrel that shoots this consistently bad will never shoot consistently good. Love the action and the stock seems fine, so I have a Proof prefit ordered.

John

jbell · Jul 31, 2024

Hondo64d said:
I bought one of the Hunter models in .308 and everything about it seems quality, but it shoots like garbage. Groups from 1.5 to 2.5” with handloads that shot in the .4s in a previous Criterion barrel rifle.

I’ve pretty much narrowed it down to the barrel. Put the Solus barreled action in an MPA chassis and it still shot poorly. Put one of my known good shooting barreled actions in the Solus stock and it still shot good. Tried two different scopes with both shooting poorly.

So, while I would not hesitate to use their action, which I really like, I could not recommend their barreled action or barrels.

John

If you are not going to do a proper load development for the rifle you should at least try some known good factory ammo in it before condemning the barrel. I recommend (as everyone will) 168g Federal Gold Medal, if you can’t get MOA or better at 100 yards then maybe start thinking about an accuracy issue.

Hondo64d · Jul 31, 2024

As stated above, I DID do some load development with 178gr ELD-Xs, Lapua brass and Varget, working up from 42 gr to over 44gr in .4gr increments. They all shot like garbage.

Additionally, I tried a proven load from previous barrels, R15 pushing 155gr Scenars from Lapua brass.

Over the years, I have used .308 barrels from Remington, Kreiger, Bartlein, Brux and Criterion. While some shot better than others, none of them ever shot as bad as this factory Solus barrel. If a barrel shoots this bad with multiple loads, it is NOT going to shoot very well with any load.

John

Magsz18 · Jul 31, 2024

Hondo64d said:
As stated above, I DID do some load development with 178gr ELD-Xs, Lapua brass and Varget, working up from 42 gr to over 44gr in .4gr increments. They all shot like garbage.

Additionally, I tried a proven load from previous barrels, R15 pushing 155gr Scenars from Lapua brass.

Over the years, I have used .308 barrels from Remington, Kreiger, Bartlein, Brux and Criterion. While some shot better than others, none of them ever shot as bad as this factory Solus barrel. If a barrel shoots this bad with multiple loads, it is NOT going to shoot very well with any load.

John

I get what you're saying and I agree with a portion of it but much like shotguns, it seems like bolt guns are all special snow flakes that have their preference for ammo.

I think as mentioned above, if the gun wont shoot FGGM then you have a legitimate complaint. Saying the gun wont shoot your "known good loads" isn't really fair. They're "known" and "good" to you but they're not as standardized as FGGM.

I have two Solus rifles, in 6.5 creedmoor. Both my wifes gun and mine are EASILY under one inch shooting shit ammo. I recently shot a .877 inch group at 100 yards with S&B 140 grain BALL ammo... I almost fell out of my chair.

image_cropper_AA908FCA-DF9D-4890-993D-FB19408D88F9-67195-000036920945DF07.jpg

Given the cost of the aero pre fits, I really cant complain. At all.

FuhQ · Jul 31, 2024

FuhQ said:
Might have to... I'll call them tomorrow at work. LOL

Update… Called Aero, and they said that since it had not shipped yet, they would retroactively add the discount, and refund the difference back to my card.

If it was $20-30 I wouldn’t worry about it, but nearly $300 will help towards my brace setup for it.

Magsz18 · Jul 31, 2024

FuhQ said:
Update… Called Aero, and they said that since it had not shipped yet, they would retroactively add the discount, and refund the difference back to my card.

If it was $20-30 I wouldn’t worry about it, but nearly $300 will help towards my brace setup for it.

Bro...

Now that's customer service. They sure as shit didn't have to do that.

Aero is KILLING it.

Now, a folding hinge would be fantastic...I'm patient though..mostly.

FuhQ · Jul 31, 2024

Magsz18 said:
Bro...

Now that's customer service. They sure as shit didn't have to do that.

Aero is KILLING it.

Now, a folding hinge would be fantastic...I'm patient though..mostly.

Don't need to wait on a folding hinge from Aero for it, unless you are trying to run the full stock... Otherwise, it already comes with a 1913 rail on the back, so just order a JMAC Customs 1913 Folder mech, and an AB-9R brace bar, and then the brace of your choice. That's what I'm going to do until I decide whether or not to SBR it. Or if some legislation decides that SBR's are not needed to be regulated...Then I'll put a real stock on it, until then I'n bracing it, and keeping it a pistol for ease of transport laws.

1913 Folding Mech

www.jmac-customs.com

FuhQ · Aug 4, 2024

Yeah, I'm happy with the way the load development is going with the .25CM... It was a hot as fuck, muggy as hell, sweaty swamp-ass day at the range... Barometric pressure was higher than normal, heat was higher than normal, and everything was just a horrible Alabama summer dog day...But living here my whole life, I'm used to it, just doesn't make me hate it any less. I much prefer to shoot during the fall/winter/springtime with lower pressures, lower temps, not sweating sitting still with sweat dripping into your eyes while you're trying to shoot...

So, as it appears, 43.5gr of StaBall 6.5 with the Berger 133 Elite is doing quite well. I'm very happy with the 5 shot groups, and the velocities are VERY impressive for a 20" barrel with 133gr heavies right @ +/- 2,800 FPS MV average. If I was only doing 3-shot groups, I would have had quite a few 1/4 MOA groups, but I like to do 5 shot groups for consistency with my target rifles. Hunting rifles, I never plan to take more than 3 shots consecutively, so 3-shot groups works fine for me for those.

Here's a few shots with the Otter Creek Labs Hydrogen-S 6.5mm (with cover on it), and my new TBAC Magnus-S HUB that I'm still waiting on my stamp for (SS Trust)... It sounds amazing with both of them, as you'll hear in a future video...

Here's the first 2 groups of the day... This first group (with the low flier) was shots 1-5 with on freshly cleaned cold bore (right before I left the house for the range)...

image_cropper_3BF40E0D-08A9-4236-AFF8-BED167EBD9AF-485-000002A7188DF4E5.jpeg

And the 2nd group was shots 6-10 after it settled back in... I'm very happy with these results.

image_cropper_82957909-02CC-4CB4-A8F4-86DB98C26A8F-485-000002A84CC08B50.jpeg

Altoonabcm157 · Aug 7, 2024

Has anyone tried out the solus obsidian yet? Any difference in feel from the regular solus or just a change to the looks?

FuhQ · Aug 7, 2024

Altoonabcm157 said:
Has anyone tried out the solus obsidian yet? Any difference in feel from the regular solus or just a change to the looks?

When they go on sale I will... I love my 2 (fixing to be 3) Solus builds, but I'm not paying $900 for just a Solus action. I think when you get them for sub-$750 they are great actions for the money...But once you get into that $800-$1000 mark, there's other "nicer" options out there.

Altoonabcm157 · Aug 7, 2024

FuhQ said:
When they go on sale I will... I love my 2 (fixing to be 3) Solus builds, but I'm not paying $900 for just a Solus action. I think when you get them for sub-$750 they are great actions for the money...But once you get into that $800-$1000 mark, there's other "nicer" options out there.

Aero has blems for 712 right now, I was debating on adding another at the sale price but wasn’t sure if it’s a real change from the original which is pretty damn good.

srt-4_uk · Aug 7, 2024

Is this the obsidian? Just playing with it in a chassis, it feels just like the original one. No rounds on it yet.

Altoonabcm157 · Aug 7, 2024

srt-4_uk said:
Is this the obsidian? Just playing with it in a chassis, it feels just like the original one. No rounds on it yet.

View attachment 8475301

That appears to be an obsidian, so from your opinion it feels the same as the original but just has a different look to the finish and the fluting.

southernpew · Aug 8, 2024

SOLUS Short Action, Obsidian - .478 Bolt Face (BLEM)

Bolt Face Size Reference .478 +/- Standard .540 +/- Magnum 6mm/6.5 Creedmoor, 243 Win, 308 Win, 8.6 Blackout 6.5 PRC, 7mm SAUM, 7mm WSM, 300 WSM. SOLUS COMBO: Add any SOLUS Barrel with this Action to SAVE BIG!

www.aeroprecisionusa.com

I picked one up for 668 after tax with my 10% discount. Figured for that price it would be worth it

JFive · Aug 8, 2024

Anyone use a Shouldered Zermatt Origin Pattern Pre-Fit Barrel for the Solus and how was the fit?

Overwatch260 · Aug 8, 2024

JFive said:
Anyone use a Shouldered Zermatt Origin Pattern Pre-Fit Barrel for the Solus and how was the fit?

Yes I have 2 shouldered Origin prefits in 6GT for mine (Keystone Accuracy & Straightjacket Armory), both fit and headspaced perfectly

ColdCanadian · Aug 8, 2024

southernpew said:
SOLUS Short Action, Obsidian - .478 Bolt Face (BLEM)

Bolt Face Size Reference .478 +/- Standard .540 +/- Magnum 6mm/6.5 Creedmoor, 243 Win, 308 Win, 8.6 Blackout 6.5 PRC, 7mm SAUM, 7mm WSM, 300 WSM. SOLUS COMBO: Add any SOLUS Barrel with this Action to SAVE BIG!

www.aeroprecisionusa.com

I picked one up for 668 after tax with my 10% discount. Figured for that price it would be worth it

If you sign up for email alerts you get 15%. I just ordered that same one for $623 Shipped

FuhQ · Aug 8, 2024

ColdCanadian said:
If you sign up for email alerts you get 15%. I just ordered that same one for $623 Shipped

What’s the code? I’m signed up for years now, but curious if I can make it work again…

southernpew · Aug 8, 2024

ColdCanadian said:
If you sign up for email alerts you get 15%. I just ordered that same one for $623 Shipped

Ive been signed up for rears now haha. But thats a deal IMO

Should have created a new email. I wonder if my MIL discount would have stacked

ColdCanadian · Aug 8, 2024

FuhQ said:
What’s the code? I’m signed up for years now, but curious if I can make it work again…

Code seemed to be one time use. I just tried it again

Magsz18 · Aug 9, 2024

Altoonabcm157 said:
Has anyone tried out the solus obsidian yet? Any difference in feel from the regular solus or just a change to the looks?

My wife has an original solus action with their sendero 6.5 CM barrel. This was a complete build from their site that we got a killer deal on.

I just put together an Obsidian for myself with the same barrel.

Her action has 500 rounds on it and an unknown amount of dry fire cycles.

My action has 200 rounds on it and an unknown amount of dry fire cycles.

Side to side, my action feels like it has a SLIGHTLY lighter bolt lift. I have no way of quantifying this other than giving you my subjective thoughts. As far as smoothness? My wife's gun is REALLY smooth. Surprisingly so. I would say that the Obsidian is ever so slightly smoother but for the price premium, you're not getting any performance benefit. What you are getting is a gorgeous finish and a beautifully machined, fluted bolt. Is that worth the premium? To me, no. To other's perhaps.

At the current price of those blemished models...run,, don't walk to buy one. You will be OBSCENELY pleased.

I've wanted to try some of the other actions out there just to say I have. Just to say i've got first hand experience but i'm finding it hard to justify spending double on something that functionally, does the same thing.

YotaEer · Aug 10, 2024

ColdCanadian said:
If you sign up for email alerts you get 15%. I just ordered that same one for $623 Shipped

Been wanting to try one of these for my next build and just did the same. Less than $650 shipped to my FFL is a great deal.

This will be a 25 creed build with manners LRH. Just gotta decide if I do another proof barrel or an osprey carbon Prefit

KYAggie · Aug 10, 2024

Questions.

1). Does anyone know why the light weight Solus actions are not listed on Aero’s website anymore?

2). How are you all getting actions for less than $650? They list for $925 and getting them for $650 is more than 15% off.

3). Are they ever going to build a long action?

YotaEer · Aug 10, 2024

KYAggie said:
Questions.

1). Does anyone know why the light weight Solus actions are not listed on Aero’s website anymore?

2). How are you all getting actions for less than $650? They list for $925 and getting them for $650 is more than 15% off.

3). Are they ever going to build a long action?

The “blem” obsidian actions are going for like $715 base price then taking the 15% off coupon they give to anyone takes it down to roughly $600. Add tax and you’re still under $650

Also noticed they no longer have the lightweight actions. I was thinking of that for my 25 creed build but couldn’t pass up the price of these blem obsidian action

FuhQ · Aug 17, 2024

Video is up of the new custom build Aero Solus .25 Creedmoor with the Otter Creek Labs Hydrogen-S 6.5mm suppressor.

cyranis · Aug 19, 2024

YotaEer said:
Also noticed they no longer have the lightweight actions

Because there was a giant recall on them.

FuhQ · Aug 19, 2024

cyranis said:
Because there was a giant recall on them.

What was the issue, I just noticed they weren’t there last week.

cyranis · Aug 19, 2024

FuhQ said:
What was the issue, I just noticed they weren’t there last week.

sploding or something.

FuhQ · Aug 19, 2024

cyranis said:
View attachment 8483226

sploding or something.

Well that sucks for those who bought them. Glad it’s not the regular ones.

ARShooter91 · Aug 19, 2024

Hmm, Brownells still selling them...

JFive · Aug 19, 2024

What's the word on the long actions?

FuhQ · Aug 19, 2024

JFive said:
What's the word on the long actions?

I'm still waiting myself... That's what's holding up my 7 PRC build... I hope the Obsidian Long Actions will be out soon. And I hope they have a full-length 20MOA top rail on them, just like the short actions... @John.Warren4 might could give us an update?

WillEver · Aug 25, 2024

I know they say there are no dumb questions, but I'm going to test that theory...

Where on a Solus action is the serial number?

ARShooter91 · Aug 25, 2024

Bottom of the election port near the front

Having trouble using the site?

Thoughts on the Aero Precision SOLUS ?

Sergeant

Unreconstructed

Sergeant

Unreconstructed

Unreconstructed

Buyer of More Ammo

Sergeant of the Hide

Buyer of More Ammo

Sergeant of the Hide

Unreconstructed

Buyer of More Ammo

Unreconstructed

Sergeant

Major Hide Member

Private

Unreconstructed

Sergeant

Gunny Sergeant

Sergeant

Sergeant of the Hide

Unreconstructed

Sergeant of the Hide

Unreconstructed

Unreconstructed

Sergeant of the Hide

Unreconstructed

Sergeant of the Hide

Private

Sergeant of the Hide

Sergeant of the Hide

Private

Sergeant of the Hide

Sergeant of the Hide

Unreconstructed

Sergeant of the Hide

Sergeant of the Hide

Sergeant of the Hide

Montani Semper Liberi

Private

Montani Semper Liberi

Unreconstructed

Private

Unreconstructed

Private

Unreconstructed

Sergeant of the Hide

Private

Unreconstructed

Private

Sergeant of the Hide

Similar threads