How many rounds with that Arken now?1730 rounds on this Factory 375 barrel
Just zeroing the Arken properly which will now live on this HTI
2 .....3 shot groups... moved 1 click left on 2nd group
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
How many rounds with that Arken now?1730 rounds on this Factory 375 barrel
Just zeroing the Arken properly which will now live on this HTI
2 .....3 shot groups... moved 1 click left on 2nd group
What backpacks are you using to carry your rig?
This one .. approx. 200 50bmg.... 100 375CT and 200 or so 338 Lap..How many rounds with that Arken now?
I wish Erberlestock would make a square Bottom Scabberd for the DTA.Erberlestock gunslinger2 or an older 511 drag bag (shoulder straps and opens as a mat)
At the end did I see him holding a 375 round with a 390 ATIP?
Thats an understatement!!Always a good day to go to the range. Shooting clay pigeons at the thousand, quite challenging from the tripod. Could only see 800 from the hillside but was rock solid.
That so awesome lol. How is the recoil?View attachment 8503556
18” .338LM rig could hunt some caribou at night
I hunt with mine out west. They are a bit heavy compared to a lightweight traditional setup that you could get in around 7-8#. But there is a give and take to both.Just started looking at the SRS a little while ago and find it very intriguing. Part of me would like it for Montana elk hunting, but it's a bit hefty. Any way to lighten them up?
What do you guys use these rifles for mostly? (Trying to learn where they shine)
How do you carry them around over longer distances? (I heard they are awkward to carry)
Does the bolt operation take a lot of getting used to?
Appreciate any feedback!
I hunt with mine. Moose, elk. Heck, tree stand for white tail deer back east. They’re heavy, but tolerable. Out west I carry a pack with a tripod too.Just started looking at the SRS a little while ago and find it very intriguing. Part of me would like it for Montana elk hunting, but it's a bit hefty. Any way to lighten them up?
What do you guys use these rifles for mostly? (Trying to learn where they shine)
How do you carry them around over longer distances? (I heard they are awkward to carry)
Does the bolt operation take a lot of getting used to?
Appreciate any feedback!
@PRDRIVERFind Rob at SPR
Rob and SPR; goes under PR driver here, and he’s great.Where is the best place to purchase a SRS? Anyways to get a deal on a new one? What is a good price? Military discount?
What caliber are you all using as a trainer setup? Was thinking that a 223 might be good.
Thanks!
We have the a factory complete 26” .338 LM kit. I also have 18”, 22.5”, 27”, and 28” Proof Carbon .338 barrels in stock for the SRS. In .308 we have the factory 22” kit along with 18” and 22.5” proof carbon .308 barrels.Anyone have a .338 Lapua or a .308 barrel? Looking for 24” or 26”.
Thanks
If you get the shank fluted it should shave another like 6 or so OZ off the weight i believe.For anyone looking to shave weight off their SRS, the Proof Carbon barrels @PRDRIVER sells are about 30% lighter than similar barrels
View attachment 8516692
these were weighed with my wife's shitty bathroom scale, so take the actual values with a grain of salt, but pay attention to the difference
Top - truck axle 1.25" straight 30" .300NM from SAC - 9.8lbs
Middle - standard SAC profile 26" 6mm Creedmoor - 6.3lbs
Bottom - Proof Carbon 26" .300NM - 4.2lbs
When I unpacked the new barrel I was surprised just how light it is compared to the other 26" barrel.
Love it, I considered making some of these as well if my rails would have sold more.Started work on something new. The factory cheek rest doesn't go high enough for me so I made one from carbon fiber. This is a quick and dirty R&D unit. I'm trying to create a replacement for the stock itself now. I have some improvements to the factory model I'm trying to implement like AR-15 grip compatibility, among other major updates. The carbon fiber cheek rest is tons more comfortable. It's also more rigid and lighter. I used 5 layers of carbon fiber and went through numerous resins before I found just the right one.
I'm happy to make one for you. Let me upgrade my membership again so I don't run afoul of the rules by posting a price. Anyone else that wants one, LMK. It takes me about 3 hours to make 1 of them but I get efficiency gains with more than one. Cost would be nicely under $100 shipped and I include hardware. The one on my rifle includes some jam nuts and spring bits so I can independently adjust the protrusion of the front and rear of the riser for a cleaner cheek weld. If you want that ability, LMK.Love it, I considered making some of these as well if my rails would have sold more.
Sadly the demand for these rifles and their accessories is very small.
I also considered carbon skins with AR15 handles, different mag well and mag drop setup as well for better PRS purposes. But its just not worth the investment to barley sell 20 parts.
I would buy one of your carbon risers if you made one, or offer a trade but my rail does not work with the SRS-M2 variant. only the SRS-A2 because of the top rail.
510 whisper really intrigues me but I don’t want to buy another suppressor. 8.6 seems like a fun round to play with and make ya giggle at the range. Thanks for the company, I sent SAC an email as well.Funny you ask, I’m about to purchase an integrated 8.6 barrel from a company out of Texas.
I bought a .510 Whisper barrel but am having a little issue with loads.
I will take one once you upgrade your account.I'm happy to make one for you. Let me upgrade my membership again so I don't run afoul of the rules by posting a price. Anyone else that wants one, LMK. It takes me about 3 hours to make 1 of them but I get efficiency gains with more than one. Cost would be nicely under $100 shipped and I include hardware. The one on my rifle includes some jam nuts and spring bits so I can independently adjust the protrusion of the front and rear of the riser for a cleaner cheek weld. If you want that ability, LMK.
I'm currently working on making a replacement for the stock itself from CF (and other materials like G10). I've also been toying with the idea of enabling the use of AI mags but that's a really major change that I haven't tested for feasibility yet and I'm just recovering from a huge fire that set me back on the CF stock project.
If someone wants a riser in something other than CF I have other textiles available (fiberglass, light denim, heavy denim, Hawaiian shirt type patterns, burlap jute, kevlar, etc.... I can tint the resin nearly any color, I can add glow in the dark to them and I can add in diamond flake, pearl, candy, etc... if you want to get shiny.