-
Having trouble using the site?
Contact support
Sidearms & Scatterguns Handguns...show 'em
- Thread starter Forgetful Coyote
- Start date
Random question for everyone. I have been saying for a while, my next purchase is going to be a Staccato (most likely a C with a threaded barrel), but the more I see it, the more I’m liking the Platypus.
I haven’t held a Platypus yet, let alone shoot one, but if it were your money, which would you choose? I’ve shot a couple different Staccatos, and they are glorious to put a word to it, and I’ve heard the Platypus shoots just as nice.
I haven’t held a Platypus yet, let alone shoot one, but if it were your money, which would you choose? I’ve shot a couple different Staccatos, and they are glorious to put a word to it, and I’ve heard the Platypus shoots just as nice.
Friend of mine has both. After shooting a single mag through each, they felt very similar. The Staccato is more asthetically pleasing, but they are both handguns that fire a bullet with a decent trigger. If you are Mil/LE, Staccato has a great program that makes their guns far more attractive price wise, plus great support if you get in a shooting.
Granted it was just a single mag. Most decent pistols are going to shoot about the same, it really depends on what you like.
I have both. Good and bad with both. On the 2011 mags you have to work some of them to make them work. Glock mags are everywhere and work. Staccato there is not much customization, were the Platypus is all about customization. The Staccato is smoother out of the box, but the platypus breaks in just fine. I recommend both of them.
Link for Dagger magwell? The wife joined me at a comp last month and really enjoyed herself. I need to strike while the iron is hot; buy her her own pistol, then start her on some legitimate training.Getting back into handguns. Gave the G48 to the little brother after he got shot at. Seemed like a good excuse for a new purchase
Shadow systems CR920XP and a dagger cause damn it’s only $260 lol
View attachment 8504186
View attachment 8504191
Yessir here ya go. I have no complaints with it. I marred some of the finish changing the trigger out, but not too concerned. It's a nice magwell though.
"GG" ALUMINUM MAGWELL FOR PSA DAGGER COMPACT
THE ORIGINAL GG MAGWELL!!! Now the Grit Grips Magwell. This magwell was designed specifically for the PSA Dagger Compact. Machined from 6061-T6 aluminum. The large, flared funnel ensures quick and accurate reloads. The magwell complements the PSA Dagger Compact’s ergonomics and cosmetic styling...
shop.gritgrips.com
It’s nice finish could be better trigger isn’t anything to write home about. But you can’t buy a Glock and do all this to it for $900. I’m excited to shoot it though. Hopefully no issues or at least after the break in it’s running like a top. Worth noting that if you have a G43x/G48 radian is coming out with a ramjet/afterburner combo for it. Just don’t know when.
I don’t own a Glock, so obviously I don’t have any of their mags, but that is one nice selling point of the Platypus. Staccato mags I’m guessing are north of $50 or $60 each, Glock mags you can find anywhere for next to nothing.
Staccato mags are around $70 and Glock 17 mags are around $24. The one thing that sucks is when you spend $70 on a mag and it doesn't work. Then you end up buying different springs and followers to make it work and now it's $100 mag. Sometimes you might have to bend them or remove a little material to get them to work, it's a 2011 thing. That's the reason I wanted to get the Platypus. I am going to send mine to MK3 to get ports done on it and a change of color.
Gees I knew Staccato parts were expensive, I never dreamed they would be $70+ per mag. Ok, so maybe the Platypus is looking up lol.
My first HK:
Attachments
Needed a new bear gun. Picked up an FN 510 Tactical from a gun shop that was liquidating for just north of $700.
Put a Parker Mountain Machine compensator on it. The comp looks factory and greatly reduces recoil (they claim 60%)
Loaded up with some hard cast bear loads. That ridiculous magazine is in the backpack. It's a big beast, but shoots like a gentle 40 now. Hope to never use it for it's intended purpose.
Put a Parker Mountain Machine compensator on it. The comp looks factory and greatly reduces recoil (they claim 60%)
Loaded up with some hard cast bear loads. That ridiculous magazine is in the backpack. It's a big beast, but shoots like a gentle 40 now. Hope to never use it for it's intended purpose.
We can finally buy a 365 X Macro comp in CA. Sig made a CA version with a loaded chamber indicator so we can have them too. Just picked up one and threw on a Holosun EPS carry. Pretty happy with it
I almost bought a 510T years ago but eventually picked the FNX45T. I already had two other .45ACP’s, so I wouldn’t have to sink in a whole bunch of cash on new ammo, plus I had been wanting a Mk23 since forever, and IMHO, the FNX45T is the upgrade to the Mk23 (I know H&K lovers are going to hate on that statement, but if the shoe fits….).
But now that I have my FNX45T kitted out and suppressed, I’ve been eye balling every 510T I pass at a gun show. 10mm is such a good round, and it is a little less heavy, so easier to conceal if need be.
And, thankfully, 10mm is holding enough of a market share that the ammunition is not terrifying. I need to start reloading it here soon
The FNX45T is a heck of a pistol. I would definitely take it over an HK. I've owned several hks and they are great pistols. But, a little behind the curve on a few things.
This was kinda a weird one I picked up. Full disclosure, I'm big fan of Colt here. But this one... it has the 25LPI front strap checkering, a steel/flat mainspring housing, an enhanced grip safety with extended beavertail and memory bump, old school slide markings, a commander hammer, traditional slide lock/safety, and underscored trigger guard. This pistol is sweet! Interestingly enough, the port is not lowered nor flared... Colt's going to do Colt I suppose?
-LD
Took about 5 years but this baby is amazing, CZ is doing Colt well from my evaluation, absolutely the best slide to frame fit I've ever seen from Colt, DLC coating, 2 piece Maxwell, fitted barrel, 5 years of waiting... it was worth the wait, just glad to have this pony in my stable.
-LD
Took the SS CR920XP out today. Shot it well, 120rds no hiccups. Trigger is meh. Have a johnny glocks connector on the way. Its been a minute since I've shot handguns and it shows. For the $50 i put into the Dagger trigger it was excellent and much better than the stock shadow systems.
I have a few different Staccatos and recently a Platypus.
They both shoot nicely. Both are accurate. (I have the 4.25 bull barrel Platypus). Both fit in my Hammer Armament holsters for the P
I really like the Platy's grip--I got the newer, more aggressive texture. Its very good, and feels just a bit slimmer. All of my Staccato grips have have been restippled and reduced (the Ps were redone, the others have grips by Extreme Shooters).
The Staccatos' DLC finish is very good. Mine get used but not abused and so I'm not sure my word on the finish's robustness counts. But I think the consensus is the DLC is good.
The Platy's is cerakote. I think even well applied (which is looks to be) is not as "good" as DLC. Others can weigh in. But OH the diversity of options.
Being able to use different RDS plates for the Staccato is nice, but so is picking a specific RDS and having mount low and choose iron sights, as is the case with the Platypus.
The customization, and the relatively mild impact on price, that Stealth Arms offers is pretty great.
There is some concern that the aluminum frame on the Plat may not hold up well with heavy use, + ammo or the like. I can't comment on that. It may/ may not be a concern for you.
None of this answers the "if it were my money, which one would I buy." I think if I was starting over, and had no magazines from one of the other, and I wasn't planning on getting into the 2011 game, Id probably get the Platypus. Its very cool. The staff at my LGS thought so to--it was the first they'd seen.
OTOH, I have a bunch of 2011s, and knew I wanted to add a Platypus.
That’s really good info, thank you. Because the Platypus is still more of a “build and order your own”, when it comes time I will probably still start with the Staccato.
Only reason being is I know of three retail stores near me that have the exact gun I want in stock. Not that I would pay retail, but if stores have it, gun shows will have it (and usually cheaper). Plus I *REALLY* hate the “order a gun, transfer it to an FFL, etc.” crap. You should be able to order what you want, fill out your 4473, and have it delivered to you. There should be no need for a third party. But that’s just my two cents.
How you liking that Holosun? I have a Vortex Venom on my FNX45T and I’m liking it meh at best. Been thinking about getting something for my P320, just don’t know what I’d want yet though.
Yeah I’ve been thinking about the SRO for my TTI (because that’s what it’s supposed to come with), but hard time justifying that kind of money on a gun that is already one of the most accurate pistols in my collection and has incredible fiber optic sights out of the box.
Before you ask, “Why not the SRO for your P320 then?” The answer is, and this is entirely my personal opinion and could very well be my imagination, the SRO on a P320 just looks weird. I guess the lines of a P320 just look better with a squarer optic. And if your next question is, “Dude, WTF? Really?” The answer to that one is I’m OCD about the stupidest shit and it will drive me nuts lol. I already hate the looks of the 512 with G45 I’m running on my 10.5” .300BLK build, but I’m not going to change it because it works soooo damn well.
I agree aesthetics matter.
If you think it’s beautiful you will want to bring yourself to it’s level.
They could tell me Hi Point is the most reliable, awesome pistol in the workd and have the stats to prove it but I won’t be buying one.
No Viking commissioned an Ulfberht and said just wrap the tang in some shit and call it good.
The obverse side of this coin is that if you choose form over function it’s on you to train to overcome the weakness you have accepted.
Wish I could say I was that guy but I choose guns that are beautiful to me and I continue to be mediocre.
Last edited:
Funny you should mention but im also ocd thats why i run square green dot on my green square pistol
And of course fde rmr on my custom 19x
Attachments
That’s awesome! I also run Black Talons.
My P10C might be hitting the market for one of these. I've not handled the walther pro trigger but that was one of my reasons for sticking with my P10c so long is that the trigger is extremely good for a stryker gun. However sadly the aftermarket for the gun just never caught on. Comps are hideous, radian wont make a ramjet for it (I asked) even though that would be perfect for that gun. I got shield arms 5+ extenders only to find out I can't put a magwell on it that fits those lol. Like it's honestly sad, the P10C is the freaking glock 19 alternative that IMO surpasses it in every way out of the box, but it just never caught on.
Seen this one?
HC10 3.0 COMPENSATOR FOR CZ P10
The Herrington Arms HC10 3.0 Compensator for CZ P-10c is designed to work flawlessly with P-10s, P-10c, and P-10f! It is engineered to fit OEM suppressor ready, Killer Innovations, and Primary Machine threaded barrels seamlessly. The HC10 works great with stock springs so no need to change...
herringtonarms.com
I have. I honestly can’t stand the esthetics of any of them. Which why i want radian to make a ramjet so desperately. It would be a perfect fit for it.Seen this one?
Expansion chamber's on the small side, though.HC10 3.0 COMPENSATOR FOR CZ P10
The Herrington Arms HC10 3.0 Compensator for CZ P-10c is designed to work flawlessly with P-10s, P-10c, and P-10f! It is engineered to fit OEM suppressor ready, Killer Innovations, and Primary Machine threaded barrels seamlessly. The HC10 works great with stock springs so no need to change...
Turns out they’re making on for the pdp pro. So might be heading that route instead of the huge PMM comp on the pdp pro X. So thinking i might pick up a 4” pdp pro and throw a ramjet on it
Last one for tonight for you ungrateful bastards.
I've got a theme going on here with 1911's and this last one is a limited edition 38 Super from my collection.-LD
I did a thing. Well... I ordered a thing months ago, forgot about the thing, and was told the thing had landed and I needed to bring money. I love the thing aka a Reserve Series P226 XFive. No, I haven't pulled the plastic off the slide yet. Love the DLC'd all steel construction, the SA flat face trigger is THE nicest Sig trigger I have manipulated, and factory gas pedal is spot on!
And because I'm a 'tard I ordered the matching Half Face Blades Disaster Jr.
And because I'm a 'tard I ordered the matching Half Face Blades Disaster Jr.
Last edited:
Thanks! I've wanted one since I was a kid lol
1.5x scope with external turrets, currently I'm hitting 3 out of 5 shots reliably on a 12x12" plate at 300yds standing unsupported.
Similar threads
