• Having trouble using the site?

    Contact support

  • You Should Now Be Receiving Emails!

    The email issued mentioned earlier this week is now fixed! You may also have received previous emails that were meant to be sent over the last few days - apologies, this was a one time issue and shouldn't happen again!

325 grain Hornady FTX H110 or LiL Gun

J

justincase

Sergeant of the Hide
Full Member
Minuteman
Feb 15, 2022
164
43
Georgia
#1
Found a little data on this load but way to far to apart on grain load to feal comfortable
Read from 29.8 H110 to 33.0 H110
None on LiL Gun but know it's a popular powder for it .
Saturday going to grab me some RL7 so have plenty of options but have a crap ton of H110 so was hoping for the 325 data ,Appreciate any and all the help in advance and thank you..
I have loaded 30.0 - 31.0 - 31.5
31.8 and 32.0 of H110.. If anyone finds the loads seem to hot please speak up and let me know what you think,going to try them this weekend..
 
#4
Bmghunter said:
I assume 458 socom, but can you confirm?
Click to expand...
458 socom ,yes
I did load 30.0, 31.0, 31.5, 31.8
And 32.0 today if there were any pressure signs I didn't see them but nervous still about no data with either H110 or LiL Gun for them ..I'm using Nickle brass if that makes a difference...
 
Last edited:
#5
Your load data is within the same range I have tested with in h110. And I have tested higher for h110 also. Thing is, you won't find pressure signs for this cartridge because it's low pressure. Unless you are looking for better accuracy or higher velocity, you can stick with your current loads for plinking.
 
  • Like
Reactions: justincase
#6
FWIW, I set COAL to 2.185" and 16" bbl length.
1728170776099.png
 
  • Like
Reactions: justincase
#7
Bmghunter said:
Your load data is within the same range I have tested with in h110. And I have tested higher for h110 also. Thing is, you won't find pressure signs for this cartridge because it's low pressure. Unless you are looking for better accuracy or higher velocity, you can stick with your current loads for plinking.
Click to expand...
Thank you I forget you have to throw away knowledge of reloading other rounds with the 458 socom..I appreciate the help .
I liked the feal of the 32.0 and was very accurate out of the rifle, so as you said, I'll stick with it..do a Lil crono testing this week and she what she is pushing too. But again thanks ,always no matter how much you think you know someone has some knowledge you don't or just might not have..
God bless ,
 
#8
Bmghunter said:
Your load data is within the same range I have tested with in h110. And I have tested higher for h110 also. Thing is, you won't find pressure signs for this cartridge because it's low pressure. Unless you are looking for better accuracy or higher velocity, you can stick with your current loads for plinking.
Click to expand...
Thank you also because I worry about starting A bit to low with some loads
 
You must log in or register to reply here.

Similar threads

J
256 grain Raptor H110 / LiL Gun
Replies
2
Views
111
justincase
J
J
LiL Gun and the 458 socom
Replies
8
Views
215
justincase
J
SEGAM
Reloading 350 Legend with Lil Gun
Replies
8
Views
5K
357Max
357Max
Aimsmall55
.300 blackout subs for SBR with LIL GUN / H110
Replies
6
Views
5K
Aimsmall55
Aimsmall55
T
300 PRC
Replies
145
Views
31K
rustyinbend
rustyinbend
Top Bottom
Back
Home
Forums
Merch
Alerts