-
Having trouble using the site?
Contact support
I heard 5/8 24 direct thread was the OG universal suppressor adapter.
Hellfire is fine then, so long as any 5/8”x24 threads you’ll ever have are in length spec.
@carbonbased oh I will I've just been at my parents this weekend. Will either be today or tomorrow. Unfortunately I have both shades of green for the set so it won't be mono color but you will get to see it with both shades.
Just a tool using a tool while trying to not be a tool in order to impress the tool in the mirror.
#MidPackTac
#TacSassLyfe
#TacClassHero
#SponsoredByTricare
#WhenInDoubtSTARCardOut
Same, but minus the tac class part, and the good form part. But I did my part and told everyone at the range to not be poor, and how much cooler they would be if they had an AI.
#assumetheposition
Attachments
This is a judgement free zone. Like planet Fitness, only not for poors.
Although I got called out in July for having this setup but stating that I don’t have the money for a reloading setup.
It identifies as a ZCO.
At least he did a mag changeThis is a judgement free zone. Like planet Fitness, only not for poors.
Although I got called out in July for having this setup but stating that I don’t have the money for a reloading setup.
It’s what heroes do.
#WhenInDoubtChangeItOut
#WeNeedA50RoundDrumForTheAXSR
#300PRCAtTheCyclicRate
#OnlyGaysChangeMags
#SuppressingFireIsContinuous
#NotGayIfItsInTheFieldOrOnTheClock
#RunningClocksAndWearingSocks
#Hashtag
#backpocketphonebulge
#dothesepantsmakemyphonelooktoobig
I shot a USPSA match today. The only time I changed a mag is when they made me. And then I faked it, just dropping a loaded mag with a round in the chamber and jamming another 27rd mag in the gun. I shaked my head disapprovingly while doing it.
I had two loaded mags on my belt like I was actually going to use them during the stage. I just put them there because everyone else was wearing the same thing.
Is that a phone in his pocket or is he just trying to draw our attention.
#LikeAndSubscribe
I do a lot of things non-consensually. Just ask my uncle.
Why? Does it have a cracked lens?
I don't concern myself with the feelings of people who still shoot factory ammo
Yea…fuck factory ammo and the rifles that shoot it
Um...What's your pick-up day?
Come on now that isn't a MRAD
Tell me where that trash can is I’ll be there in 2.0
Just wanna point out we’re on page 420 of this thread
#havefunsitingonyourstool
#Iwillbeoutwinning
Who am I kidding I will be working too much and crotch goblining in between , lucky to be able to take a pot shot at a guilty animal
what kind of impecile thinks 2 flats are going to hold with nothing else ?
#geewonderwhymyreddotdidntholdzero
Good thing I have 6 of these mounts I planned on using Raptars or Mars on
Yeah need to take one permanently attach it
Edit. It’s not the screws loosening it’s theres nothing besides those little screws. So it will move
You save money on loctite by cross threading everything
cross threading aluminum is low strength compared to swapping loctite for JB weld. Problem solved, problem staying solved.
Pfffff JB “Weld” I’ll show you weld pal
Then just TIG the mount to the scope.
Next TIG the rings to the rail.
Rail to the action.
Action to barrel.
Barrel to hand.
Other hand to crotch.
Crotch to @Dirty D
etc.
Soon you’re PRS champ of the world
#getTiggywithit
#droptheSigandTig
#IfItsAllWarpedNothingsWarped
Last edited:
This scope was on a FDE AXSR. I just put a TT 7-35 on the SR instead. So the RAL8000 may be moving to a PB AXSA or a new home.
Oh yeah, I know it wasn’t on there to stay. I appreciate the pic! It helps me figure out if I like the look.
Similar threads
