16-18 inch shorty rifles

Not sure what bullet you are using, or your target game animal... I would assume 140's given your Superformance velocities?

An awesome load for shorties is the 95 VMax over 8208 XBR (if you were able to get in on the recent shipment of 8208 that was available). 39.8 gr generates 3150 from a 22" barrel, and should stay around ~3000 fps from a shorter barrel.
130gr Berger OTM on whitetail.

That’s impressive velocity.
 
16.5” 22CM build. Heading to Wyoming this Friday for a mule deer hunt for its maiden voyage. Getting 3150 from 75gr ELD-M’s. So pleased with it I am building a twin to dedicate to night hunting. The Falkor LW7 is the craziest smooth action I’ve ever felt. Feeding is incredible.

IMG_8667.jpeg
 
16.5” 22CM build. Heading to Wyoming this Friday for a mule deer hunt for its maiden voyage. Getting 3150 from 75gr ELD-M’s. So pleased with it I am building a twin to dedicate to night hunting. The Falkor LW7 is the craziest smooth action I’ve ever felt. Feeding is incredible.

View attachment 8507878
Love the cerakote color on that rifle. Well done!
 
  • Like
Reactions: ChrisAU
87gr V-max

I’ve tried N150 I got to top viht load with poor obturation

RS62 42.7gr only 2700fps grea lt accurate load but I was hoping to get 3000fps

My barrel is a bit longer than 18” allowed on the shorty thread… but still short for a 6mm creedmoor

Just thinking aloud.... Looking at the estimates given by Gordons Reloading Tool software, Vihtavuori max loads seem a little conservative. Another grain of N150 maybe? Of course, this is just an estimate, so approach with caution.
 
  • Like
Reactions: Scotch_egg
Just thinking aloud.... Looking at the estimates given by Gordons Reloading Tool software, Vihtavuori max loads seem a little conservative. Another grain of N150 maybe? Of course, this is just an estimate, so approach with caution.
Thank you for taking the time to use Gordon’s. At the time I got the crazy results on my brass; soot around the rim only, I had some help from some guys in the U.K. according to QL the viht figures were vastly underrated. I changed to RS62 and was in between chronos when I found the sub half MOA load so haven’t re-visited the N150. I suppose it won’t harm to climb the data slowly at the same time trying some N140 and I have just been given half a pound of N160.

Viht powders are readily available in the U.K. and 4350 banned or it would be my go to.
 
Trying to put together a budget setup for some deer and hog hunting. Have right at $2K into it so far.

Howa 1500 .308 16.25” barreled action
MDT Oryx chassis
Vortex Strike Eagle
DDC Enticer S

View attachment 8510345
Is this barreled action from Brownells? How is the accuracy? Tossing around the idea of getting back into a bolt rifle next year or two and the barreled actions appear to be a good starting point.
 
Is this barreled action from Brownells? How is the accuracy? Tossing around the idea of getting back into a bolt rifle next year or two and the barreled actions appear to be a good starting point.
They are great rifles. If you wait for them to go on sale, you can snag one for ~$379ish.

The action has integrated recoil lug. The bolt is made from one piece and has m16 extractor. Most who have taken them apart to work on them claim they're always pretty consistent and don't need truing. For the price, it's great.

This was mine with the factory barrel still on.

15 rounds under an inch. 14 would have been 3/4

20240903_180605.jpg
 
Is this barreled action from Brownells? How is the accuracy? Tossing around the idea of getting back into a bolt rifle next year or two and the barreled actions appear to be a good starting point.
Yes, it is but I have not put any rounds through it yet. I got it on sale for $335.66 to be exact. I plan on getting a 6.5 CM next time on sale.
 
Probably one of the more unique builds I've done. This was originally a 22" 308 that sat in a McMillan A5 and then a KRG Bravo. I realized that I rarely do distance shooting, so it might make more sense to size down. Was hoping to get it to fit in a tennis bag, but it's just slightly too long.

kMPtTkt.jpeg


Origin SA
JTAC Ind. Screech Owl Chassis
PVA 16.5" 6.5cm Med Palma
Nightforce NXS 2.5-10x42

Sitting at ~11lbs with everything. Might try a cf barrel in the future to shed some weight.
This is slick! One of these days I will do a build off that chassis, not sure on that collapsing stock though.
 
lol, Terminus Zeus SA, Manners EH1A with mini chassis, Proof Research 6.5 CM spun up by S&S Precision in Denton, TX. Mikael has done most of my rifles and all are hammers. Running a TBAC Ultra 7 with NF NX8 4-32. Hawkins 1 inch high rings, Cole-Tac suppressor cover. Bought the Zeus and Proof from FrontRangePrecision.
 

Attachments

  • IMG_9647.jpeg
    IMG_9647.jpeg
    317.9 KB · Views: 143
Last edited:
While much less exotic, figured this thread could use a classic. T3X Ranch Rifle. Currently has a Dead Air Primal on it, but will be getting a Griffin Sportsman UL to lighten it up even further. Scope is a Ten Mile 3-18 FFP which despite its length is actually quite lightweight.
 

Attachments

  • PXL_20241023_135141982~2.jpg
    PXL_20241023_135141982~2.jpg
    304.3 KB · Views: 121
Very nice. What is the weight difference between a common CF barrel vs a SS barrel at this length?

lol, Terminus Zeus SA, Manners EH1A with mini chassis, Proof Research 6.5 CM spun up by S&S Precision in Denton, TX. Mikael has done most of my rifles and all are hammers. Running a TBAC Ultra 7 with NF NX8 4-32. Hawkins 1 inch high rings, Cole-Tac suppressor cover. Bought the Zeus and Proof from FrontRangePrecision.
 
lol, Terminus Zeus SA, Manners EH1A with mini chassis, Proof Research 6.5 CM spun up by S&S Precision in Denton, TX. Mikael has done most of my rifles and all are hammers. Running a TBAC Ultra 7 with NF NX8 4-32. Hawkins 1 inch high rings, Cole-Tac suppressor cover. Bought the Zeus and Proof from FrontRangePrecision.
What does that rifle weigh?
 
Just finished throwing together this general purpose, critter gitter, plinking, fun gun. Howa 16.25” 6.5 Creedmoor heavy barreled action from Brownells. Pillar and glass bedded into a Boyd’s At One stock. Mounts and optics a mixed bag of leftover Seekins rings, Leupold 20MOA rail and a 3-15 SWFA. Hoping to push 130 ELD-Ms to 2500-2550.
IMG_5978.jpeg
 
Debating on which cartridge to build a low recoil shorty. We have a 1000y range and a good amount of 6.5cm and larger caliber rifles. Application for this rifle will be different. The goal is to shoot TINY groups on papers and to put rounds on steels out to 700y. Balance is important as most of the shooting is positionally. Here is my thinking:

223: Reloading the smaller case brass is a bit of a chore.
6 ARC, 22 ARC: Lack of quality brass, only Hornady and Starline available.
6.5G: Norma brass avail. Slow but the 100g VT (meh bc) is out there.
6BR/Dasher: More recoil. Plenty of reloading components avail.
22GT/CM: Short barrel life. I would like to get 2k or more out of a barrel.

Help me get this right? What am I missing? What am I wrong with?

(Pic: 18in Impact 6.5cm in a AT-X AICS chassis)
View attachment 8500952
Have you thought about a 224 valkyrie?